Oil mods and still bearing failure LOL - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jflogerzi · 07-29-2019, 11:50 PM

TOB?

Sent from my GM1915 using Tapatalk

Ultramaroon · 08-06-2019, 01:03 AM

You do not fuck around. Props.

Halo_2 · 08-06-2019, 06:11 AM

Supposably from factory the 2014+ got larger oil galleries from the factory.
To prevent oil starvation

Is this true?

CrowsFeast · 08-07-2019, 01:02 PM

Quote:

Originally Posted by solidsnake11

I was wrong about all gears being stripped. Only the counter shaft gears are stripped. Explains why the only gear that worked was 5th.

I have 0 experience with failed transmissions but doesn't that look kind of melted rather than sheared or worn?

Ultramaroon · 08-17-2019, 07:52 PM

What's going on between these two points?

Irace86.2.0 · 08-17-2019, 08:28 PM

Quote:

Originally Posted by CrowsFeast

I have 0 experience with failed transmissions but doesn't that look kind of melted rather than sheared or worn?

It does look melted like the gears spun against each other, where just the tips were rubbing

Ultramaroon · 08-17-2019, 08:30 PM

Quote:

Originally Posted by solidsnake11

Transmission mount.

rubber?

Ultramaroon · 08-17-2019, 08:32 PM

Quote:

Originally Posted by solidsnake11

Transmission mount is a 80 c10 chevy.

Even cooler.

Ultramaroon · 08-18-2019, 12:13 AM

Quote:

Originally Posted by solidsnake11

Cooler than that is it cost $6.99 at your local advanced.

lol

Fuck yeah.

ermax · 08-19-2019, 09:40 PM

What will you use as your FD? I just looked up the ratios on the 350z and unless you change the FD your going to have some crazy short gears, especially with the power you’re making.

ermax · 08-20-2019, 03:56 AM

Quote:

Originally Posted by solidsnake11

There really isn't that much difference. 1st will be like stock with 4.30 fd, 2nd 4.35 fd, 3rd 4.32 fd, 4th 4.30 fd, 5th 4.10 same, and 6th 4.24 fd

Yeah I already looked up those numbers and at a glance it looked like it would have a larger impact. I just threw the numbers into a calculator and the top speeds per gear aren’t as far off as I thought they would be. Even stock seems a little short for big power though. Seems like somewhere down the road it wouldn’t hurt to go with a lower FD.

ML · 09-10-2019, 03:53 PM

where in NC are you? I need you to come build my motor lol

ML · 09-10-2019, 10:41 PM

Quote:

Originally Posted by solidsnake11

My own projects keep me to occupied to work on other peoples cars.

I'm sure.

86MLR · 09-10-2019, 11:36 PM

Is this happening with 17+ blocks?

Cheers

08-06-2019, 01:03 AM	#16
Ultramaroon not playing cards Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 32,392 Thanks: 53,053 Thanked 37,228 Times in 19,308 Posts Mentioned: 1118 Post(s)	You do not fuck around. Props. __________________ service manuals

08-17-2019, 07:52 PM	#19
Ultramaroon not playing cards Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 32,392 Thanks: 53,053 Thanked 37,228 Times in 19,308 Posts Mentioned: 1118 Post(s)	What's going on between these two points? __________________ service manuals

09-10-2019, 11:36 PM	#28
86MLR Senior Member Join Date: Aug 2018 Drives: 2002 VX Commodore SS LS1 Auto Location: Sydney Posts: 2,203 Thanks: 500 Thanked 2,185 Times in 1,111 Posts Mentioned: 13 Post(s)	Is this happening with 17+ blocks? Cheers __________________ Disclaimer: This post represents the official views of the voices in my head at the time of posting. http://www.ft86club.com/forums/showthread.php?t=133311 I'm only here for the biscuits

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine failure - Spun rod bearing TWICE	dinoniel	Issues \| Warranty \| Recalls / TSB	38	11-07-2016 01:17 PM
rod bearing failure. New long block question.	USMCgetsome	Engine, Exhaust, Transmission	13	06-12-2016 04:35 PM
Engine Failure (#4 Rod Bearing + Short Block)	eriktherod	Issues \| Warranty \| Recalls / TSB	215	10-30-2015 12:24 AM
CV Joint Failure and Differential Failure	AreteAuto	Issues \| Warranty \| Recalls / TSB	26	06-16-2015 05:18 PM
Engine Failure (Bearing Rod 2)	Incursion	Issues \| Warranty \| Recalls / TSB	59	11-27-2014 02:17 PM

08-06-2019, 06:11 AM	#17
Halo_2 Senior Member Join Date: Jul 2019 Drives: 2014 MY15 86 GTS Location: Australia Posts: 100 Thanks: 29 Thanked 39 Times in 17 Posts Mentioned: 0 Post(s)	Supposably from factory the 2014+ got larger oil galleries from the factory. To prevent oil starvation Is this true?

08-19-2019, 09:40 PM	#24
ermax Senior Member Join Date: Sep 2017 Drives: 2022 BRZ Limited Silver Location: Jacksonville, FL Posts: 2,533 Thanks: 883 Thanked 2,049 Times in 1,191 Posts Mentioned: 68 Post(s)	What will you use as your FD? I just looked up the ratios on the 350z and unless you change the FD your going to have some crazy short gears, especially with the power you’re making.

User Name		Remember Me?
Password