My interior - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Hawk77FT · 01-31-2019, 08:54 PM

Hi all,
I thought I should share a picture of my door as part of my interior redesign.
I have been working with CF for the last 10 years..a bit of a love hate relationship, yet I am still spending my spare time in garage making things for my car.

This is only the door card, but there is plenty other small little things I have done inside. I will make a dedicated post with all the stuff that I have done so far. Hint: not one single part inside is not modified, done is alcantara or carbon fiber.

Name: 51182369_496120024127727_3789967068560883712_n.jpg
Views: 923
Size: 135.5 KB

Name: 51182369_496120024127727_3789967068560883712_n.jpg
Views: 923
Size: 135.5 KB

suzyj · 02-01-2019, 09:08 AM

With the exception of the CF bit, I had a friend who decked out the back of his panel van pretty much the same.

StraightOuttaCanadaEh · 02-01-2019, 09:15 AM

Must be a nice place to be in every day. I also focused on my interior mostly, but I lack scratch building skills, especially when it comes to upholstery etc, so I'm limited to what the aftermarket offers.

SuperTom · 02-01-2019, 09:21 AM

quality of work and materials looks great. Might be too busy though would have considered making the CF areas the same as the black alcantara.

I speak from experience and have redone my corvette interior 3 times. Tried to eventually tone it down with just leather/alcantara and some CF accents.

norcalpb · 02-01-2019, 04:47 PM

Did you drill into your armrest?

Dr. BRZ · 02-01-2019, 05:56 PM

It looks too 'womanly'

olsonpg · 02-01-2019, 06:26 PM

Quote:

Originally Posted by Hawk77FT

Hi all,
I thought I should share a picture of my door as part of my interior redesign.
I have been working with CF for the last 10 years..a bit of a love hate relationship, yet I am still spending my spare time in garage making things for my car.

This is only the door card, but there is plenty other small little things I have done inside. I will make a dedicated post with all the stuff that I have done so far. Hint: not one single part inside is not modified, done is alcantara or carbon fiber.

Attachment 174629

Carbon work looks absolutely stellar. I see you have a bunch of other carbon work done to the inside of the car. Would you mind showing us?? It's really nice to see something new on here.

Hawk77FT · 02-01-2019, 11:31 PM

Thanks guys. The whole theme is hexagon hence the hex stitching and hex carbon in some areas. I have been quite dissapointed with the looks of the interior and wanted something a bit nicer. Thought I will go black, but changed my mind and went red and few more bits and pieces. I love pagani, so I took some of the inspiration from their cars. Will post more pics soon

Hawk77FT · 02-03-2019, 09:18 PM

As I promised here are some more pics of the actual interior. There are some bits in pieces that are still in the works, but you get the picture. I am not really that far from finishing the whole god damn thing as I am tired of spending time in garage every damn weekend...who am i kidding..I love it.

Name: IMAG0359-20190204-100118942.jpg
Views: 592
Size: 131.9 KB

Name: IMAG0359-20190204-100118942.jpg
Views: 592
Size: 131.9 KB

Name: IMAG0362-20190204-100122608.jpg
Views: 609
Size: 137.5 KB

Name: IMAG0366-20190204-100117852.jpg
Views: 595
Size: 127.9 KB

Name: IMAG0365-20190204-100119474.jpg
Views: 589
Size: 119.7 KB

StraightOuttaCanadaEh · 02-04-2019, 01:07 AM

Ha! I definitely see the Pagani influence especially around the instrument binnacle

dhuang · 02-04-2019, 03:55 AM

I see the Pagani-ness too. Nice!

soundman98 · 02-04-2019, 06:50 PM

so did you decide that hexagonal carbon weave would be too much?

https://compositeenvisions.com/carbo...-7-2oz-244gsm/

Guest · 02-04-2019, 06:59 PM

Saw the interior in another thread and definitely thought: Pagani.

Hawk77FT · 02-04-2019, 07:22 PM

Quote:

Originally Posted by soundman98

so did you decide that hexagonal carbon weave would be too much?

https://compositeenvisions.com/carbo...-7-2oz-244gsm/

Actually there are couple of bits and pieces inside done in this weave. Speaker cover, roof panel. I love it, but there are a fair few bits in the car that are quite small, not really allowing the weave to show.

01-31-2019, 08:54 PM	#1
Hawk77FT Senior Member Join Date: Jul 2012 Drives: GTS 86 Location: Australia Posts: 989 Thanks: 873 Thanked 476 Times in 272 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	My interior Hi all, I thought I should share a picture of my door as part of my interior redesign. I have been working with CF for the last 10 years..a bit of a love hate relationship, yet I am still spending my spare time in garage making things for my car. This is only the door card, but there is plenty other small little things I have done inside. I will make a dedicated post with all the stuff that I have done so far. Hint: not one single part inside is not modified, done is alcantara or carbon fiber.

02-01-2019, 09:15 AM	#3
StraightOuttaCanadaEh Wes Join Date: Feb 2017 Drives: Artisan Spirits '17 86 Location: Toronto Posts: 2,871 Thanks: 1,255 Thanked 1,734 Times in 1,025 Posts Mentioned: 21 Post(s) Tagged: 0 Thread(s)	Must be a nice place to be in every day. I also focused on my interior mostly, but I lack scratch building skills, especially when it comes to upholstery etc, so I'm limited to what the aftermarket offers. __________________ Instagram: @gt86ws

02-01-2019, 09:21 AM	#4
SuperTom Senior Member Join Date: Feb 2014 Drives: C5, GT-86, '24 Colorado TrailBoss Location: New Castle DE Posts: 1,576 Thanks: 1,682 Thanked 1,049 Times in 582 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	quality of work and materials looks great. Might be too busy though would have considered making the CF areas the same as the black alcantara. I speak from experience and have redone my corvette interior 3 times. Tried to eventually tone it down with just leather/alcantara and some CF accents. __________________ Last edited by SuperTom; 02-01-2019 at 09:59 AM.

02-04-2019, 01:07 AM	#10
StraightOuttaCanadaEh Wes Join Date: Feb 2017 Drives: Artisan Spirits '17 86 Location: Toronto Posts: 2,871 Thanks: 1,255 Thanked 1,734 Times in 1,025 Posts Mentioned: 21 Post(s) Tagged: 0 Thread(s)	Ha! I definitely see the Pagani influence especially around the instrument binnacle __________________ Instagram: @gt86ws

02-04-2019, 03:55 AM	#11
dhuang Cannonball Record Guy Join Date: Jul 2012 Drives: Series.Yellow, 4C, Fit Location: Houston / Atlanta Posts: 493 Thanks: 480 Thanked 429 Times in 223 Posts Mentioned: 8 Post(s) Tagged: 2 Thread(s)	I see the Pagani-ness too. Nice! __________________ 2017 Series.Yellow 2013 Whiteout VINwiki - Changing Automotive History

02-01-2019, 09:08 AM	#2
suzyj Member Join Date: Dec 2018 Drives: 2018 86 GTS Location: Western Australia Posts: 89 Thanks: 48 Thanked 143 Times in 50 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	With the exception of the CF bit, I had a friend who decked out the back of his panel van pretty much the same.

02-01-2019, 04:47 PM	#5
norcalpb Senior Member Join Date: Oct 2013 Drives: 2013 BRZ, 2023 Model 3 Location: SF Bay Area Posts: 2,345 Thanks: 1,256 Thanked 902 Times in 590 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Did you drill into your armrest?

02-01-2019, 11:31 PM	#8
Hawk77FT Senior Member Join Date: Jul 2012 Drives: GTS 86 Location: Australia Posts: 989 Thanks: 873 Thanked 476 Times in 272 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	Thanks guys. The whole theme is hexagon hence the hex stitching and hex carbon in some areas. I have been quite dissapointed with the looks of the interior and wanted something a bit nicer. Thought I will go black, but changed my mind and went red and few more bits and pieces. I love pagani, so I took some of the inspiration from their cars. Will post more pics soon

02-03-2019, 09:18 PM	#9
Hawk77FT Senior Member Join Date: Jul 2012 Drives: GTS 86 Location: Australia Posts: 989 Thanks: 873 Thanked 476 Times in 272 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	As I promised here are some more pics of the actual interior. There are some bits in pieces that are still in the works, but you get the picture. I am not really that far from finishing the whole god damn thing as I am tired of spending time in garage every damn weekend...who am i kidding..I love it.

02-04-2019, 06:50 PM	#12
soundman98 ProCrastinationConsultant Join Date: Sep 2013 Drives: '14 Ranger, '18 Tacoma 4Dr LB Location: chicago-ish Posts: 11,330 Thanks: 35,240 Thanked 13,675 Times in 6,782 Posts Mentioned: 98 Post(s) Tagged: 0 Thread(s)	so did you decide that hexagonal carbon weave would be too much? https://compositeenvisions.com/carbo...-7-2oz-244gsm/ __________________ "The time you enjoy wasting is not wasted time"

02-04-2019, 06:59 PM	#13
Guest Member Join Date: May 2018 Drives: 2017 BRZ PP Location: NorCal Posts: 50 Thanks: 4 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Saw the interior in another thread and definitely thought: Pagani.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which interior fuse slot to install led interior lighting in?	btan219	Cosmetic Modification (Interior/Exterior/Lighting)	11	06-27-2017 11:43 PM
Wiring interior L.E.Ds to come on with the interior lights/headlights	TEXAS_LE	Electronics \| Audio \| NAV \| Infotainment	2	12-13-2014 10:18 AM
DCW Carbon Fiber interior items! Center console Plaques / Interior panels	doggy	Interior Parts (Incl. Lighting)	143	10-11-2013 12:17 PM
LED interior conversion kits (interior), USA stock & warranty	WTF	Interior Parts (Incl. Lighting)	0	05-22-2013 11:17 PM
Interior LED mod..	rikdrt1	Cosmetic Modification (Interior/Exterior/Lighting)	14	06-19-2012 10:53 PM

User Name		Remember Me?
Password