Will this fit? (width, offset and tire size Qs)

[Leonardo]

Originally Posted by JOSE_FBR7777

Ok so I was thinking of going staggered but I didn’t know what size to run, whit the sizes you gave me would I still be able to put coil overs?


Sent from my iPhone using Tapatalk

Yes, of course.

I have coils now, but had 1" drop springs for 65,000 miles. IMO, 1" drop springs are great for DD.

[JOSE_FBR7777]

Originally Posted by Leonardo

Yes, of course.



I have coils now, but had 1" drop springs for 65,000 miles. IMO, 1" drop springs are great for DD.

You got a picture of what the set up would look like?


Sent from my iPhone using Tapatalk

[Leonardo]

Originally Posted by JOSE_FBR7777

You got a picture of what the set up would look like?


Sent from my iPhone using Tapatalk

Are you asking about my car?

Cause, my car is the silver FR-S in this thread.

https://www.ft86club.com/forums/showthread.php?t=132471

[Mr_Eyo]

I used the new fitment simulator in the other stickied thread to find out that 255/35 on 18x8.5" +45 clears everything at stock height and -2 deg camber in front. Does anyone currently run this?

[Leonardo]

Originally Posted by Mr_Eyo

I used the new fitment simulator in the other stickied thread to find out that 255/35 on 18x8.5" +45 clears everything at stock height and -2 deg camber in front. Does anyone currently run this?

Personally, I'd want a wider wheel for a 255. I think you will have rubbing issues with that much camber and a 255. It wont be flush at all either. I know it will work if you add a 15mm spacer. How are you getting -2 camber?

[JOSE_FBR7777]

Originally Posted by Leonardo

Are you asking about my car?



Cause, my car is the silver FR-S in this thread.



https://www.ft86club.com/forums/showthread.php?t=132471

What’s up man, question am I able to run 255/35 in the rear and 225/40 235/40


Sent from my iPhone using Tapatalk

[Mr_Eyo]

Originally Posted by Leonardo

Personally, I'd want a wider wheel for a 255. I think you will have rubbing issues with that much camber and a 255. It wont be flush at all either. I know it will work if you add a 15mm spacer. How are you getting -2 camber?

I have the CSG Spec Tein Flex A's.

[Leonardo]

Originally Posted by Mr_Eyo

I have the CSG Spec Tein Flex A's.

Ok....With coilovers, you won't have any issues with a 18x8.5 +45 with a 255/35/18.

What wheels are you looking at?

[Mr_Eyo]

Originally Posted by Leonardo

Ok....With coilovers, you won't have any issues with a 18x8.5 +45 with a 255/35/18.

What wheels are you looking at?

Thanks. I already have the Enkei TFR in gunmetal gray running 225/40. They're a bit stretched. The 255s offer an extra inch of width to hopefully help put down supercharger power better.

Current w/ 225/40:
http://imgur.com/a/t2NenXC

[Leonardo]

Originally Posted by Mr_Eyo

Thanks. I already have the Enkei TFR in gunmetal gray running 225/40. They're a bit stretched. The 255s offer an extra inch of width to hopefully help put down supercharger power better.

Current w/ 225/40:
http://imgur.com/a/t2NenXC

Those Enkies look great on your car! What tire are you thinking of getting? One that's 200 tread wear?

[Mr_Eyo]

Originally Posted by Leonardo

Those Enkies look great on your car! What tire are you thinking of getting? One that's 200 tread wear?

Thanks. Actually, I like these all seasons. 400 TW and AA traction IIRC. BFG gforce comp 2.

[JOSE_FBR7777]

Originally Posted by Leonardo

Yes, of course.



I have coils now, but had 1" drop springs for 65,000 miles. IMO, 1" drop springs are great for DD.

What up man can I run 245/40/r18


Sent from my iPhone using Tapatalk

[Leonardo]

Originally Posted by JOSE_FBR7777

What up man can I run 245/40/r18


Sent from my iPhone using Tapatalk

Yes, it is 1.1 inches taller. (will raise your car 0.55 inch)
A 245/40/18 has an outside diameter of 25.7"


A 215 /45/17 has an outside diameter of 24.6"
A 245/35/18 has an outside diameter of 24.8"

[baiz1989]

Looking to pick up the Enkei Raijins

I am on the stock suspension setup, will these fit 18 x 8.5 with 245/40 tyres on front and rear? Is it going to raise the car to much ?

Thanks in advance