Power window help

[FenixFury]

Originally Posted by Ultramaroon

Does it go up some and then stop? If so, does it do it the same way every time?

Does it sound/feel like a jam, or does it seem electrical, like it just dies?

It doesn't do anything at all :/ I know the motor is fine because the mechanic showed me it working, so I don't know what's going on right now.

Sent from my G3223 using Tapatalk

[Ultramaroon]

Is the passenger disable switch enabled (pushed in)?

[Tcoat]

Originally Posted by FenixFury

Tried to do the reset.

Fiddled with the button on the passenger door and it wasn't responding despite blinking. Tried the one on the driver door that corresponds to the passenger window and it didn't do anything either. Tried the reset sequence and it didn't do anything.

Not sure if the mechanic didn't reconnect it properly, or if something is actually fucked.

Sent from my G3223 using Tapatalk

Just throwing this out there so don't get mad.
You have checked the child passenger side lock out button on the driver's side right?

[FenixFury]

Originally Posted by Tcoat

Just throwing this out there so don't get mad.
You have checked the child passenger side lock out button on the driver's side right?

Haha I won't get mad, it's a valid thing to check for

It wasn't activated. I clicked it on and off just to make sure and tried it again, still nothing.

Sent from my G3223 using Tapatalk

[Tcoat]

Originally Posted by FenixFury

Haha I won't get mad, it's a valid thing to check for

It wasn't activated. I clicked it on and off just to make sure and tried it again, still nothing.

Sent from my G3223 using Tapatalk

You would be surprised how many people would get mad!
If it just didn't work and there was no flashing indicator I may buy the damaged switch thing. Since it is flashing it is saying it is in overload and the reset should work. If it was my car and nothing has worked yet I would try unhooking the battery for a few minutes and see if that resets it. May have no impact but it is easy to do and frequently resolves computer issues (I should be in IT) so is worth a shot.

[FenixFury]

Originally Posted by Tcoat

You would be surprised how many people would get mad!
If it just didn't work and there was no flashing indicator I may buy the damaged switch thing. Since it is flashing it is saying it is in overload and the reset should work. If it was my car and nothing has worked yet I would try unhooking the battery for a few minutes and see if that resets it. May have no impact but it is easy to do and frequently resolves computer issues (I should be in IT) so is worth a shot.

I'll give it a shot later tonight when I get home from work and keep everyone posted with results!

Sent from my G3223 using Tapatalk

[Ultramaroon]

Originally Posted by FenixFury

I'll give it a shot later tonight when I get home from work and keep everyone posted with results!

Sent from my G3223 using Tapatalk

Just remember that your engine/throttle will feel wonky while the ECU re-learns all the self-adjusting parameters. Don't be alarmed by that.

[DashRipRock]

I had this problem recently. Read the instructions in manual. Couldn't get it to work. It seems simple. I was trying it with the engine not running and the key in the ON position. Tried it with the engine running and it worked first try.



Sent from my LG-H812 using Tapatalk

[Ultramaroon]