One piece dash and other 2017 parts - Page 23 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

fx1mark · 07-05-2017, 11:30 PM

I ordered the gauge hood that matched the one piece dash. I received it today. it is the exact same material and thread. the one I received had the edges not properly glued. I worked on it some using contact cement. the only thing I am still not satisfied with is the lower edge facing the driver has a few places that are not completely even. I will need to look at it in the light this weekend and see if it is noticeable and if I need to remove it an work on it some more.

Jakinit · 07-06-2017, 10:50 AM

I wasn't the biggest fan of the one piece dash, but I hated the stock radio. Just ordered the Kenwood DDX917WS from AU and the one piece dash. Better headunit here I come.

devtec · 07-07-2017, 01:24 PM

Anyone who replaced their 2017 dash panels with the one piece still have your old pieces? Would like to buy the 2017 piano black center panel and the passenger dash panel. Please lmk! Thanks...

Sent from my iPhone using Tapatalk

Jakinit · 07-10-2017, 05:24 PM

Quote:

Originally Posted by devtec

Anyone who replaced their 2017 dash panels with the one piece still have your old pieces? Would like to buy the 2017 piano black center panel and the passenger dash panel. Please lmk! Thanks...

Sent from my iPhone using Tapatalk

I'm replacing mine this month. Should have them off the car by the end of July. Just waiting on my new head unit.

To note: your head unit will have to be trapezoidal to fit the stock 2017 dash.

Andrew025 · 07-10-2017, 05:31 PM

Quote:

Originally Posted by fx1mark

I ordered the gauge hood that matched the one piece dash. I received it today. it is the exact same material and thread. the one I received had the edges not properly glued. I worked on it some using contact cement. the only thing I am still not satisfied with is the lower edge facing the driver has a few places that are not completely even. I will need to look at it in the light this weekend and see if it is noticeable and if I need to remove it an work on it some more.

What's that cup holder looking thing by the passenger seat?

fx1mark · 07-10-2017, 09:37 PM

Quote:

Originally Posted by Andrew025

What's that cup holder looking thing by the passenger seat?

look at the previous page.

jorgerendonjr · 08-24-2017, 04:10 AM

Can any if you guyes be kind enough to provide me with the part numbers for the kneed leather pads with red stitching using the 2017 material, as well as the corresponding leather door trim pieces.
Thanks fellas,

johan · 08-24-2017, 01:25 PM

Quote:

Originally Posted by jorgerendonjr

Can any if you guyes be kind enough to provide me with the part numbers for the kneed leather pads with red stitching using the 2017 material, as well as the corresponding leather door trim pieces.
Thanks fellas,

Door trim - http://parts.subaru.com/a/Subaru_201...10-941-01.html

Center console pads - http://parts.subaru.com/a/Subaru_201...10-660-03.html

There are two options for each, I'm assuming one is red, one is yellow? You will probably need to either google the pn's to try and deduce the difference, or call a dealer and ask them.

DAEMANO · 08-24-2017, 02:48 PM

Quote:

Originally Posted by fx1mark

I ordered the gauge hood that matched the one piece dash. I received it today. it is the exact same material and thread. the one I received had the edges not properly glued. I worked on it some using contact cement. the only thing I am still not satisfied with is the lower edge facing the driver has a few places that are not completely even. I will need to look at it in the light this weekend and see if it is noticeable and if I need to remove it an work on it some more.

Also bought one of these 2017 BRZ hoods a while back and it was the same bad glue job. Used Gorilla Glue Super Glue in very small dabs to fix it. Took care of it easy. Nice to have the instrument cluster hood matching the 1 piece dash. Also bought the knee pads and door panels. They all came in the same leather like material in that kind of lighter black color. All in all a worthwhile upgrade for a 2013 FR-S.

Andrew025 · 08-24-2017, 04:22 PM

Quote:

Originally Posted by DAEMANO

Also bought one of these 2017 BRZ hoods a while back and it was the same bad glue job. Used Gorilla Glue Super Glue in very small dabs to fix it. Took care of it easy. Nice to have the instrument cluster hood matching the 1 piece dash. Also bought the knee pads and door panels. They all came in the same leather like material in that kind of lighter black color. All in all a worthwhile upgrade for a 2013 FR-S.

My one piece dash has the same crappy glue job as well...

fx1mark · 08-24-2017, 05:02 PM

Quote:

Originally Posted by Andrew025

My one piece dash has the same crappy glue job as well...

My dash was properly glued. I have assume they don't leave the factory that way but come unglued afterwards. they need better glue.

Cockatoo · 08-24-2017, 06:08 PM

Just got the one piece and mine too had a shitty glue job. Guessing it coudlnt handle the heat from shipping or something, no way it was boxed that way with how nice it was packaged.

johan · 08-24-2017, 07:08 PM

Quote:

Originally Posted by DAEMANO

Also bought one of these 2017 BRZ hoods a while back and it was the same bad glue job. Used Gorilla Glue Super Glue in very small dabs to fix it. Took care of it easy. Nice to have the instrument cluster hood matching the 1 piece dash. Also bought the knee pads and door panels. They all came in the same leather like material in that kind of lighter black color. All in all a worthwhile upgrade for a 2013 FR-S.

Quote:

Originally Posted by Andrew025

My one piece dash has the same crappy glue job as well...

My 2017 with the two piece dash, the part that has the "leather" on it, also has a crappy glue job on the right side of it. There's a nice bubble where they didn't put enough glue. I've been too lazy to fix it.

jorgerendonjr · 08-24-2017, 10:15 PM

Quote:

Originally Posted by johan

Door trim - http://parts.subaru.com/a/Subaru_201...10-941-01.html

Center console pads - http://parts.subaru.com/a/Subaru_201...10-660-03.html

There are two options for each, I'm assuming one is red, one is yellow? You will probably need to either google the pn's to try and deduce the difference, or call a dealer and ask them.

Thank you appreciate it, but how do I know which is red and which is yellow stitching?

07-05-2017, 11:30 PM	#309
fx1mark Senior Member Join Date: Apr 2015 Drives: red 2014 FR-S Location: Alabama Posts: 259 Thanks: 52 Thanked 162 Times in 99 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	I ordered the gauge hood that matched the one piece dash. I received it today. it is the exact same material and thread. the one I received had the edges not properly glued. I worked on it some using contact cement. the only thing I am still not satisfied with is the lower edge facing the driver has a few places that are not completely even. I will need to look at it in the light this weekend and see if it is noticeable and if I need to remove it an work on it some more. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB Dash Radio & Piece Next to It.	Mr.	Want-To-Buy Requests	12	12-21-2017 10:34 PM
Series Blue Dash Piece	brzsubarusti13	Interior Parts (Incl. Lighting)	20	09-06-2015 05:14 PM
dash piece clips	a_dee	Cosmetic Modification (Interior/Exterior/Lighting)	1	07-23-2015 02:49 AM
Idea to fix double din dash piece	Larkin	Cosmetic Modification (Interior/Exterior/Lighting)	0	06-22-2013 03:16 AM
WTB/WTT: Carbon Dash Piece	JPxM0Dz	Interior Parts (Incl. Lighting)	4	07-16-2012 01:11 PM

07-07-2017, 01:24 PM	#311
devtec Member Join Date: Feb 2010 Drives: 2015 Subaru BRZ Limited Location: Bay Area, CA Posts: 80 Thanks: 10 Thanked 32 Times in 11 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Anyone who replaced their 2017 dash panels with the one piece still have your old pieces? Would like to buy the 2017 piano black center panel and the passenger dash panel. Please lmk! Thanks... Sent from my iPhone using Tapatalk

08-24-2017, 04:10 AM	#315
jorgerendonjr Senior Member Join Date: Mar 2017 Drives: Frs Location: Miami Posts: 193 Thanks: 8 Thanked 42 Times in 12 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Can any if you guyes be kind enough to provide me with the part numbers for the kneed leather pads with red stitching using the 2017 material, as well as the corresponding leather door trim pieces. Thanks fellas,

08-24-2017, 06:08 PM	#320
Cockatoo TALLY FT86 Join Date: Mar 2014 Drives: 2014 FR-S Monogram -- SBD Turbo -- Location: Tallahassee, FL Posts: 624 Thanks: 185 Thanked 445 Times in 242 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	Just got the one piece and mine too had a shitty glue job. Guessing it coudlnt handle the heat from shipping or something, no way it was boxed that way with how nice it was packaged.

User Name		Remember Me?
Password