PBM modded knuckles - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Shady195 · 05-19-2017, 12:27 PM

Keep in mind your suspension is just hanging right now, on the ground at full lock it will be less than that, mine looks liek A LOT more in the air than it does on the ground

I really wish i could find the pic I took with my megan inners at full lock on the ground. grrr

cheeseburger · 06-22-2017, 02:13 PM

@TylerLieberman what tie rods would you recommend from your experience?

timandytimandy · 06-29-2017, 01:44 PM

Dang drifters is another option for knuckles. Apparently gets a little more angle than the pbm mod. His are $220 and you don't need tie rods are ends.

tato.valverde · 06-29-2017, 09:59 PM

Quote:

Originally Posted by timandytimandy

Dang drifters is another option for knuckles. Apparently gets a little more angle than the pbm mod. His are $220 and you don't need tie rods are ends.

I highly doubt you can get more angle than with the PBM if you don't change tie rods at all...

TylerLieberman · 07-04-2017, 05:12 PM

Quote:

Originally Posted by cheeseburger

@TylerLieberman what tie rods would you recommend from your experience?

Megan, which are really just rebranded Hard Race units.

Shady195 · 07-12-2017, 05:13 PM

Quote:

Originally Posted by timandytimandy

Dang drifters is another option for knuckles. Apparently gets a little more angle than the pbm mod. His are $220 and you don't need tie rods are ends.

I would NEVER buy these from Russ. He lists them on his site and posts them on forums acting like you just bolt them right on your stock FR-S and go ham. Never mind the fact that there is no real testing or evidence of any of the claims he makes about them other than "One of my customers replaced his PBM knuckles with these and said he gets a lot more angle"

I'm pretty sure he just copied the PBM knuckles and modified the cut a bit. (they may just be an exact copy) Theres only so many ways you can cut and re-weld and knuckle and there are two different reputable companies that have actually tested their product and have people using them.

I would never in a million years recommend buying those knuckles

Quote:

Originally Posted by tato.valverde

I highly doubt you can get more angle than with the PBM if you don't change tie rods at all...

You can't. He's full of BS.

timandytimandy · 07-12-2017, 06:40 PM

Ok dude don't buy em them. Few local dudes run em with no problems.

05-19-2017, 12:27 PM	#15
Shady195 Senior Member Join Date: Jun 2014 Drives: '13 10 Series FRS #1203 Location: Albany, NY Posts: 850 Thanks: 7 Thanked 386 Times in 221 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Keep in mind your suspension is just hanging right now, on the ground at full lock it will be less than that, mine looks liek A LOT more in the air than it does on the ground I really wish i could find the pic I took with my megan inners at full lock on the ground. grrr __________________ My build thread!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drop Knuckles instead of lowering Springs or Coilovers	FRSPacNW	DIY (Do-It-Yourself) Guides	19	10-09-2017 01:42 AM
PArt Shop Max Roll center knuckles.	laextreme5	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	3	03-14-2017 10:07 PM
Wisefab knuckles	Ryaquinn	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	25	03-27-2014 01:28 AM

06-22-2017, 02:13 PM	#16
cheeseburger IG: @_southwell_86 Join Date: Nov 2015 Drives: Rwd Prius. Location: orange county new york Posts: 118 Thanks: 6 Thanked 35 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	@TylerLieberman what tie rods would you recommend from your experience?

06-29-2017, 01:44 PM	#17
timandytimandy Wanna-be Join Date: Jun 2016 Drives: 2013 Firestorm FR-S Location: NH Posts: 35 Thanks: 1 Thanked 10 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Dang drifters is another option for knuckles. Apparently gets a little more angle than the pbm mod. His are $220 and you don't need tie rods are ends.

07-12-2017, 06:40 PM	#21
timandytimandy Wanna-be Join Date: Jun 2016 Drives: 2013 Firestorm FR-S Location: NH Posts: 35 Thanks: 1 Thanked 10 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Ok dude don't buy em them. Few local dudes run em with no problems.

User Name		Remember Me?
Password