OpenFlash Headers in 2017 &a Tune -- success & no tune yet

[justinco]

Originally Posted by Mr. Kurtz

Cool, looking forward to seeing your results.

What upgrades have you performed?

Typical intake/header/exhaust setup with ECUtek tuning. All the details are in sig' videos.

Originally Posted by Qc86

What are the numbers bone stock?
Cant wait till i get mine tuned!!

My 2017 BRZ made 145lb.ft torque and 179hp at the wheels bone stock. That was 4 more torque and 5 more hp than my 2013 FRS made bone stock (on the same dyno, different times).

[ame="https://www.youtube.com/watch?v=2qY6YKnH8jI"]2017 Subaru BRZ stock power numbers from the dyno - YouTube[/ame]

[Qc86]

Can't wait to see the result with ecutek and all the bolt on's!

[solidONE]

Originally Posted by justinco

Typical intake/header/exhaust setup with ECUtek tuning. All the details are in sig' videos.



My 2017 BRZ made 145lb.ft torque and 179hp at the wheels bone stock. That was 4 more torque and 5 more hp than my 2013 FRS made bone stock (on the same dyno, different times).

A stock MY13 dynoing over 165whp is pretty healthy. 174whp is really good.

[Xymox]

I have successfully flashed to "Stg 1 91 v3.0 K00C.bin" on my 2017 Subaru BRZ. I got it directly from Shiv. It seems to be a slight improvement with the idle. It seems to be an overall improvement... only time will tell.

[Carbinebbq]

Originally Posted by Xymox

I have successfully flashed to "Stg 1 91 v3.0 K00C.bin" on my 2017 Subaru BRZ. I got it directly from Shiv. It seems to be a slight improvement with the idle. It seems to be an overall improvement... only time will tell.

Nice. I've noticed a little pulsating every now and then on idle. Not sure if it is due to the UEL's. Not an issue, just something that stands out to me sometimes. Otherwise no issues. I'm on a previous beta tune version. AT (slushiiiiieee) 😁

Instagram @Blue.icee.brz

[mjanmohammad]

I've emailed them with my stock tune a couple times in the last few days to try and get the stage 2 beta tune, no response. My car is running rich with the Tomei UEL headers and the CEL is bugging me. 2017 MT

[steve99]

Originally Posted by mjanmohammad

I've emailed them with my stock tune a couple times in the last few days to try and get the stage 2 beta tune, no response. My car is running rich with the Tomei UEL headers and the CEL is bugging me. 2017 MT

Try either of the tunes here mate :-)


They will get rid of CEL for you


http://www.ft86club.com/forums/showp...5&postcount=19






.

[mjanmohammad]

Got the stg2 beta tunes around 1am this morning, CEL cleared, torque dip is basically gone


Sent from my iPhone using Tapatalk

[mjanmohammad]

Originally Posted by mjanmohammad

Got the stg2 beta tunes around 1am this morning, CEL cleared, torque dip is basically gone


Sent from my iPhone using Tapatalk

Drove on it most of the day today, still smells like its running rich. I can smell unburnt gas when I stop, though it isn't as bad as it was pre-tune

[Carbinebbq]

Originally Posted by mjanmohammad

Drove on it most of the day today, still smells like its running rich. I can smell unburnt gas when I stop, though it isn't as bad as it was pre-tune

Is your header catless? Might have something to do with it.

Instagram @ blue.icee.brz

[mjanmohammad]

Originally Posted by Carbinebbq

Is your header catless? Might have something to do with it.

Instagram @ blue.icee.brz

Yes it is, but the smell is still stronger than most of the other catless BRZs I've been around.

[mjanmohammad]

Its definitely running rich. 3rd gear WOT log here. Shiv requested it yesterday

http://www.datazap.me/u/mjanmohammad...log=0&data=1-8

[Tzarro]

Not sure if this applies to Stage 2 or just Stage 1 tunes, but their website now states in the description "Now supports all 2017 models!"

http://www.openflashtablet.com/shop/oft-frs-brz-gt86/

Looking to pick one up along with my UEL header on my 2017 soon so I hope it's true!

[Jasonb]

Are there official 2017 tunes yet? Want to get the oft and a uel.