Wheel specs for Rocket Bunny Fenders - Page 18 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

VIP BRZ · 03-01-2017, 12:56 PM

Quote:

Originally Posted by evomike

if i ran those widths id probably use offsets like that, my widths are wider and my offest is super far off that so its not that crazy at all. and you dont see those offsets because wheels like that are rare and expensive would be my guess.

But like, from above ^ fizzymike

Is running the same width as the SpeedHunters car in the front 18x9.5"
But -8 vs -46 , both V2.

Like i said.. I'm going crazy trying to figure this out on paper. I'm probably just going to have to get my hands on some spacers sizes and see first hand/ Trial and error.

DustinS · 03-01-2017, 01:01 PM

Apparently The spec are actually the same according to Greddy Website. 40mm front 65mm Rear

VIP BRZ · 03-01-2017, 01:56 PM

Quote:

Originally Posted by DustinS

Apparently The spec are actually the same according to Greddy Website. 40mm front 65mm Rear

I saw that too, but i think that measurement is coming from another place?
Because, it lists the same numbers for the V3

V3 is definitely wider right?

VIP BRZ · 03-06-2017, 10:51 AM

All installed, Got the o'll ruler out and did some measuring.
I went with a 25mm in front and a 51mm rear, put me at
17x10 0
17x10 -26

Ill post some picks once the spacers come in

RatedT · 03-27-2017, 04:44 PM

Quote:

Originally Posted by VIP BRZ

All installed, Got the o'll ruler out and did some measuring.
I went with a 25mm in front and a 51mm rear, put me at
17x10 0
17x10 -26

Ill post some picks once the spacers come in

I can't wait to see how yours looks. I'm planning to go with 19x10 -0/19x11 -11 which is basically the exact same as yours.

VIP BRZ · 03-27-2017, 11:53 PM

17x10 0
17x10 -26

amit65 · 03-28-2017, 03:10 PM

Hi..

Shouldn't be hard getting wheels to where you want them to fit, but I wouldn't get wheels until kit is installed, then calculate wheel/tire specs from there.

PREVENTATIVE VEHICLE MAINTENANCE

evomike · 03-28-2017, 04:28 PM

time to sell those wheels and buy ones that fit, those are huge spacers and they still dont fit.

D_Thissen · 03-28-2017, 04:43 PM

Quote:

Originally Posted by VIP BRZ

17x10 0
17x10 -26

]

You're joking, right? How much money did you spend on spacers?

VIP BRZ · 03-28-2017, 04:49 PM

Quote:

Originally Posted by evomike

time to sell those wheels and buy ones that fit, those are huge spacers and they still dont fit.

The spacers are temporary until i can afford to rebuild the rear wheels to the specs i want

Quote:

Originally Posted by D_Thissen

You're joking, right? How much money did you spend on spacers?

Lol, that's all 4 spacers stacked. (x2) 51mm's (x2) 25mm's , but wasn't super cheep they are quality spacers.

Ryan_FRS86 · 04-11-2017, 07:35 PM

Im ordering the wheels right now.. need some help please

AG recommended 18x10 +8, 18x11 -30.. I want it to sit flush with the kit. I think the front is fine with that but is the back too much??? was told 18x11 -16 would probably be the right size?

evomike · 04-11-2017, 08:03 PM

Quote:

Originally Posted by Ryan_FRS86

Im ordering the wheels right now.. need some help please

AG recommended 18x10 +8, 18x11 -30.. I want it to sit flush with the kit. I think the front is fine with that but is the back too much??? was told 18x11 -16 would probably be the right size?

I'm running 18x12.5-10 in the rear so you should be fine with the rear and the front may be a little sunk

VIP BRZ · 04-11-2017, 08:23 PM

Quote:

Originally Posted by Ryan_FRS86

Im ordering the wheels right now.. need some help please

AG recommended 18x10 +8, 18x11 -30.. I want it to sit flush with the kit. I think the front is fine with that but is the back too much??? was told 18x11 -16 would probably be the right size?

Quote:

Originally Posted by evomike

I'm running 18x12.5-10 in the rear so you should be fine with the rear and the front may be a little sunk

Yea i'd do 0 offset in the front

Songha · 04-18-2017, 09:13 AM

Thought I'd chime in as well, maybe help some of you get closer to what you need for fitment.

F1R F21 18x10.5 +20 with 265/35s,
56.1 to 73.1 hub-centric rings all around,
50mm with said 56.1 to 73.1 hub-centric rings in the rear.

03-01-2017, 01:01 PM	#240
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,950 Thanks: 2,539 Thanked 1,423 Times in 806 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	Apparently The spec are actually the same according to Greddy Website. 40mm front 65mm Rear __________________

03-28-2017, 03:10 PM	#245
amit65 Junior Member Join Date: Mar 2017 Drives: maruti Location: india Posts: 1 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Wheel specs for Rocket Bunny Fenders Hi.. Shouldn't be hard getting wheels to where you want them to fit, but I wouldn't get wheels until kit is installed, then calculate wheel/tire specs from there. PREVENTATIVE VEHICLE MAINTENANCE Last edited by amit65; 03-31-2017 at 12:02 AM.

04-18-2017, 09:13 AM	#252
Songha Senior Member Join Date: Jan 2016 Drives: 2013 Scion FRS Location: Warwick, RI Posts: 109 Thanks: 0 Thanked 55 Times in 33 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Thought I'd chime in as well, maybe help some of you get closer to what you need for fitment. F1R F21 18x10.5 +20 with 265/35s, 56.1 to 73.1 hub-centric rings all around, 50mm with said 56.1 to 73.1 hub-centric rings in the rear. __________________ 2013 Scion FR-S \| 6-MT \| Raven Black \| Performance Mods: Invidia N1 Catback, Invidia Catless Frontpipe, BC Racing Extreme Lows Coilovers, 1320 Performance UEL Catless Headers, 1320 Performance Overpipe, OpenFlash Tablet (Stage 2 UEL, 93 Oct. tune), Whiteline Front Swaybar, Whitelight Adj. Front Endlinks \| Asthetic Mods: DS Style Front Lip, Rocket Bunny style flares, F1R F21s \| MY BUILD THREAD!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replica rocket bunny	crildz	Cosmetic Modification (Interior/Exterior/Lighting)	103	05-09-2014 05:35 PM
Rocket Bunny FRS in Dubai	TAP Auto Parts	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	49	12-04-2012 02:39 PM
Red Rocket Bunny FR-S - Speedhunters	RaceR	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	5	10-12-2012 01:48 AM
Rocket Bunny or Modelista? HELP!!!	ShowstoppersUSA	Cosmetic Modification (Interior/Exterior/Lighting)	21	08-16-2012 02:23 PM
GReddy/Rocket Bunny Wheels?	Coultergeist	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	12	08-15-2012 03:39 AM

03-06-2017, 10:51 AM	#242
VIP BRZ Senior Member Join Date: Mar 2016 Drives: 2014 Subaru BRZ Location: CA - San Fernando Valley Posts: 491 Thanks: 242 Thanked 333 Times in 179 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	All installed, Got the o'll ruler out and did some measuring. I went with a 25mm in front and a 51mm rear, put me at 17x10 0 17x10 -26 Ill post some picks once the spacers come in

03-27-2017, 11:53 PM	#244
VIP BRZ Senior Member Join Date: Mar 2016 Drives: 2014 Subaru BRZ Location: CA - San Fernando Valley Posts: 491 Thanks: 242 Thanked 333 Times in 179 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	17x10 0 17x10 -26

03-28-2017, 04:28 PM	#246
evomike Senior Member Join Date: Oct 2013 Drives: frs Location: philly Posts: 562 Thanks: 18 Thanked 310 Times in 182 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	time to sell those wheels and buy ones that fit, those are huge spacers and they still dont fit.

User Name		Remember Me?
Password