Turbo vs supercharger

[new2subaru]

Patsully,

What makes you say you want 300-350HP?

Why set your goals at a number that can break you engine and tranny?

[cdrazic93]

Originally Posted by Freeman

And a search didn't turn up any other threads on this?

Originally Posted by Patsully3

I was looking but didn't come up on much I mean if u have links that would b much appreciated

http://www.ft86club.com/forums/showthread.php?t=95037

http://www.ft86club.com/forums/showthread.php?t=55011

http://www.ft86club.com/forums/showthread.php?t=98268

http://www.ft86club.com/forums/showthread.php?t=94371

http://www.ft86club.com/forums/showthread.php?t=13354

http://www.ft86club.com/forums/showthread.php?t=63933

http://www.ft86club.com/forums/showthread.php?t=87905

Im sorry, what didnt show up? because all of this did.

Learn how to search, please. for your internet safety.


psst, mods, can I get a close on this thread

[AJPG]

Originally Posted by Matt@Cosworth

something thats well worth pointing out is the limitations of the standard automatic transmission

as I know of a couple of guys running a turbo setup on autos and they have to stick to about 300Whp max otherwise the transmission overeats and welds itself together
and this is running an oil cooler and synthetic oil
not looking to rain on your parade but you need to know

Hi,

Didn't know about the AT "eating" her self, but if your are so kind please show a link.
Does it welds itself together? Do you know how high temp have to go to get a weld!...

I do have a AT with FI since 2013, beating the car at every opportunity I have and 0 issues so far.

[Matt@Cosworth]

glad to hear it
can I ask how much power your'e running and what if any cooling modes you've done?

[COO86L]

This is an email I've sent to a few people but it's all in Australian Dollars. It is still relevant.

"Hmm, since I've had it fully 110% tuned I'm quite stoked with the kit. Delicious Tuning did an amazing job on it. I ended up getting waay better efficiency than expected.
I haven't done any dyno logs but I'm currently running 98 with a diff brace and I'm really happy with the power it's putting out.
In Aussie dollars, the SPS kit is about 7500 shipped. Most of the guys do offer 10% off without you asking though. I paid 4500 for mine which is cheaper than avo's base turbo kit.
For 7k, I could have and would have bought an SME (Sydney Motorsports Engineering) kit with a Blouch or Borg Warner turbo. The power possibility is practically endless with that kit.
On E85 I'm running around the same as AVO top turbo kit.
Kraftwerks was a definite choice for me also except for its mounting bracket wouldn't work with my oil cooler.
The sprintex kit is put together really well, sounds amazing and goes hard but that's the limit. It's already at its utmost performance with the only way to go better is nitrous (my current consideration) or the 335 kit. If you were closer to far north coast NSW I'd gladly let you take my car for a ride!

As for the perrin... It's exceptionally quit on cruise and warm idle. As soon as that accelerator is touched it's a different story. Quite loud but not tooooo ridiculous.
I'm actually about to take it off and sell it for about 800 as I'm making a custom system with a bit of a twist.

I'm currently running the perrin with tomei uel and SME overpipe. Stock front pipe for cat and resonator.
With the Perrin only, no other mods and na it was super quiet.
Here's the maths though:
210 SPS - 7500
Reasonable headers - 600 to 900
Overpipe - 250 to 350
Resulting power on 98, approx 250ish whp

SME turbo - 7k from prospeed
Header - no need
Overpipe- 300
Resulting power - whatever you want, over 350ish whp expect to buy a clutch.
300whp is about 6 or 7 psi from memory on a 25-30 psi turbo

Sprintex - about 8500 before catback
Turbo - 7300 before catback."

[AJPG]

Originally Posted by Matt@Cosworth

glad to hear it
can I ask how much power your'e running and what if any cooling modes you've done?

362whp on 100 octane 11.5 psi, oem and oil to air oilcoolers for the transmission alone.

Links please.

[Matt@Cosworth]

Originally Posted by AJPG

362whp on 100 octane 11.5 psi, oem and oil to air oilcoolers for the transmission alone.

Links please.

here you go

http://www.gt86.org.uk/forums/topic/...#comment-42143