Antenna delete - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FRSBRZGT86FAN · 05-04-2016, 12:36 PM

Quote:

Originally Posted by PandaSPUR

I never even thought about doing this, but that looks good.

Antenna is only for radio right? GPS is under the dash?

Quote:

Originally Posted by Ashikabi

I don't have gps but yea should be radio only. GPS should use a different kind of signal. My phones GPS works fine without an external antenna but my boom box at work can't pick up a radio station 40 miles away with an antenna

The FR-S and BR-Z GPS antenna is not through the roof antenna, your assumptions are correct. There is a special antenna mounted on a metal plate either above the gauge cluster or above the glovebox

pooch · 05-04-2016, 12:37 PM

You could always get a window/pillar hidden mount antenna if reception is needed. Very interested, quite a nice yet simple project..

Sent from my iPhone using Tapatalk

YamahaR86 · 05-04-2016, 12:58 PM

Quote:

Originally Posted by FRSBRZGT86FAN

Yea yours looks good, that other guys used some console plaque like you said and it stuck out and he made some comments like it would be good enough to hold water out and if you vinyl the roof its fine.

Also I know it's weird but OCD is kicking in could you press enter on before the second photo so its all in one line

You seen the one where the guy cut up a soda can to mask the hole then vinyl wrap over it? That's like begging for it to scratch the paint.

Ashikabi · 05-04-2016, 12:58 PM

Whoever wants it just pm me and I'll email you the file. Take it to whatever 3d printing service you prefer and you'll get a little tile in the mail, paint, silicone and you're done

YamahaR86 · 05-04-2016, 01:06 PM

It looks great, my friend has a small 3D printer for his hobby but unfortunately I use the radio sometimes when I have to drive my sister around.

RichardsFRS · 05-04-2016, 01:18 PM

I like to listen to my radio and I like the RC antenna, much more than the shark one. But if I had a choice to listen to the radio and do this, I would

Ashikabi · 05-04-2016, 01:20 PM

Quote:

Originally Posted by YamahaR86

It looks great, my friend has a small 3D printer for his hobby but unfortunately I use the radio sometimes when I have to drive my sister around.

I don't believe the cheap ones will work as well. I had this plug made from "frosted model plastic" and it has very fine details/sharp edges. Very different from other prints I've seen that look like they are made from sand or string/thread

Ashikabi · 05-04-2016, 01:20 PM

Quote:

Originally Posted by RichardsFRS

I like to listen to my radio and I like the RC antenna, much more than the shark one. But if I had a choice to listen to the radio and do this, I would

Pooch mentioned a pillar mount antenna. May be an option for you

stevesnj · 05-04-2016, 08:23 PM

Well that crappy console plaque is mine and I agree it is not great but I don't have access to a 3d printer and time to do this. So this is definitely better than mine. Also I didn't wrap it after and this has NOT leaked since install and snow and rain. So it seems like it works. I am glad I inspired your idea @Ashikabi :] So how about sending me the file? thanks!

This looks just as good from a distance.

pooch · 05-04-2016, 10:00 PM

Quote:

Originally Posted by RichardsFRS

I like to listen to my radio and I like the RC antenna, much more than the shark one. But if I had a choice to listen to the radio and do this, I would

https://www.ebay.com/ulk/itm/391023164442

saj · 05-05-2016, 12:07 AM

Looks really good in pics, I was thinking about how to do this when you posted this thread.

Just ordered mine from https://www.shapeways.com/ using Ashikabi's file, and used the promo code MAKESHIPMAY for free shipping.

Ashikabi · 05-05-2016, 12:53 AM

Quote:

Originally Posted by saj

Looks really good in pics, I was thinking about how to do this when you posted this thread.

Just ordered mine from https://www.shapeways.com/ using Ashikabi's file, and used the promo code MAKESHIPMAY for free shipping.

What was your total cost? I remember shipping for me was $5

saj · 05-05-2016, 02:12 AM

$9.69

Ashikabi · 05-05-2016, 07:58 AM

Quote:

Originally Posted by saj

$9.69

Good stuff

05-04-2016, 01:18 PM	#20
RichardsFRS Senior Member Join Date: Dec 2015 Drives: 2013 Pearl White 6MT Location: Gainesville Ga Posts: 938 Thanks: 5 Thanked 356 Times in 246 Posts Mentioned: 13 Post(s) Tagged: 2 Thread(s)	I like to listen to my radio and I like the RC antenna, much more than the shark one. But if I had a choice to listen to the radio and do this, I would __________________ Back from bancation in Banopolis where I laid on the beach with a beer between my legs. I at night and ate at sun rise

05-04-2016, 08:23 PM	#23
stevesnj Senior Member Join Date: May 2013 Drives: 2016 FR-S Oceanic Blue Location: Southern NJ Posts: 2,958 Thanks: 2,158 Thanked 1,601 Times in 923 Posts Mentioned: 30 Post(s) Tagged: 2 Thread(s)	Well that crappy console plaque is mine and I agree it is not great but I don't have access to a 3d printer and time to do this. So this is definitely better than mine. Also I didn't wrap it after and this has NOT leaked since install and snow and rain. So it seems like it works. I am glad I inspired your idea @Ashikabi :] So how about sending me the file? thanks! This looks just as good from a distance. __________________ My 2016 Build thread TRD Exhaust with custom quad tips, TRD Lowering Springs,TRD Quick shifter,LED;DRL, Projectors, and turn signals. Re-badge, 86 Nanny, WinmaxW2 Pads, K&N Drop In, Antenna delete

05-05-2016, 12:07 AM	#25
saj Member Join Date: Jan 2015 Drives: ̶1̶0̶ ̶S̶ Location: ̶L̶o̶s̶ ̶A̶n̶g̶e̶l̶e̶s̶ Posts: 69 Thanks: 138 Thanked 36 Times in 24 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Looks really good in pics, I was thinking about how to do this when you posted this thread. Just ordered mine from https://www.shapeways.com/ using Ashikabi's file, and used the promo code MAKESHIPMAY for free shipping. Last edited by saj; 05-05-2016 at 12:48 AM. Reason: update

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Antenna delete/plug	Baldoak	Cosmetic Modification (Interior/Exterior/Lighting)	5	02-04-2016 08:01 PM
Antenna Delete no Weld Version with Carbon Plaque	stevesnj	Cosmetic Modification (Interior/Exterior/Lighting)	18	01-02-2016 09:50 PM
Anyone done an antenna delete?	Anthony	Cosmetic Modification (Interior/Exterior/Lighting)	15	10-11-2013 12:29 AM
BRZ Pearl White Beat-Sonic Antenna and Perrin 2" Shorty Antenna	ericmpena	Exterior Parts (Aero, Lighting, Etc.)	3	08-08-2013 05:38 PM
WTT: Beat-Sonic Antenna for Modelista Antenna	joergasm	Canada Classifieds	4	12-10-2012 10:13 AM

05-04-2016, 12:58 PM	#18
Ashikabi Senior Member Join Date: Aug 2014 Drives: 2013 FR-S Location: Northwest Iowa Posts: 7,359 Thanks: 454 Thanked 4,549 Times in 2,950 Posts Mentioned: 59 Post(s) Tagged: 5 Thread(s)	Whoever wants it just pm me and I'll email you the file. Take it to whatever 3d printing service you prefer and you'll get a little tile in the mail, paint, silicone and you're done

05-04-2016, 01:06 PM	#19
YamahaR86 JDM Vaping Stance Nation Join Date: May 2013 Drives: 2013 White Location: FL Posts: 710 Thanks: 650 Thanked 345 Times in 218 Posts Mentioned: 14 Post(s) Tagged: 2 Thread(s)	It looks great, my friend has a small 3D printer for his hobby but unfortunately I use the radio sometimes when I have to drive my sister around.

05-05-2016, 02:12 AM	#27
saj Member Join Date: Jan 2015 Drives: ̶1̶0̶ ̶S̶ Location: ̶L̶o̶s̶ ̶A̶n̶g̶e̶l̶e̶s̶ Posts: 69 Thanks: 138 Thanked 36 Times in 24 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	$9.69

User Name		Remember Me?
Password