Will this fit? (width, offset and tire size Qs)

[Dmoney]

Hi guys need some help I have trd lowering springs and just bought rims that are 18x9.5 +35 offset. Wanted to keep the springs for now if possible without scraping and hitting the fenders or suspension. So I need help with what tire sizes will fit. Thanks.

[Killerbee]

Originally Posted by Dmoney

Hi guys need some help I have trd lowering springs and just bought rims that are 18x9.5 +35 offset. Wanted to keep the springs for now if possible without scraping and hitting the fenders or suspension. So I need help with what tire sizes will fit. Thanks.

245/35/18 all around should fit. Its thight in the front, so let it check again from your tire guy, but it should fit.

You can also staggef the tire setup to 245/35/18 front and 265/30/18 rear

[Aire2thethrone]

hey I got a quick question, I just tried putting wheels and tires on my 16 BRZ today. So from what I gathered from forum searching was that 245/35r18 would be a good fit all around, so I bought 18x9 +45 Konig integrams and Michelin pss and the tires touched the springs in the front, any suggestions for what to do now?

[swarb]

Originally Posted by Aire2thethrone

hey I got a quick question, I just tried putting wheels and tires on my 16 BRZ today. So from what I gathered from forum searching was that 245/35r18 would be a good fit all around, so I bought 18x9 +45 Konig integrams and Michelin pss and the tires touched the springs in the front, any suggestions for what to do now?

Slip on spacer. 3-5mm.

[Calais]

hi i'm looking at 949 racing 17x8 6UL, offset is +40 and trying to go for a "meatier" tyre look i've gone on a couple of fitment calculators, and have come up with 2 tyre sizes 245/40R17 and 225/45R17, my question is will either of these have rubbing or clearance issues either front or rear?
i'm on stock set up but looking to lower 1" in the future

[EliteRB]

So I will be running F 18x9.5 -10 and R 18x11 -20 with 15mm spacers all around will I be ok with a 225/40 and R 245/40 and yes the fenders are cut. thanks!!! or would it be better to run a 255/35 in the rear with out the 15mm spacers?

[swarb]

Originally Posted by Calais

hi i'm looking at 949 racing 17x8 6UL, offset is +40 and trying to go for a "meatier" tyre look i've gone on a couple of fitment calculators, and have come up with 2 tyre sizes 245/40R17 and 225/45R17, my question is will either of these have rubbing or clearance issues either front or rear?
i'm on stock set up but looking to lower 1" in the future

No clearance or rubbing issues.

Originally Posted by EliteRB

So I will be running F 18x9.5 -10 and R 18x11 -20 with 15mm spacers all around will I be ok with a 225/40 and R 245/40 and yes the fenders are cut. thanks!!! or would it be better to run a 255/35 in the rear with out the 15mm spacers?

Everyone fits RB differently. You could fit either.

[Calais]

Originally Posted by swarb

No clearance or rubbing issues.



Everyone fits RB differently. You could fit either.

thanks

[unplugged]

2016 BRZ Limited

Looking to get either 17" or 18" Rota DPT in Bronze with Bridgestone Potenza S-04. Still debating if I want stock tire size or go wider on 17's. Or move up to 18's - something like 225 width.

Need help with width and offset. I plan to drop the car 1.0-1.2". I believe these were the choices given:

17x7.0
17x8.0
18x8.0
18x8.5

The other choice is
18x8 Rota Tarmac 3 - Sports Bronze(5x100/e48/56.1)

[swarb]

Originally Posted by unplugged

2016 BRZ Limited

Looking to get either 17" or 18" Rota DPT in Bronze with Bridgestone Potenza S-04. Still debating if I want stock tire size or go wider on 17's. Or move up to 18's - something like 225 width.

Need help with width and offset. I plan to drop the car 1.0-1.2". I believe these were the choices given:

17x7.0
17x8.0
18x8.0
18x8.5

question?
8's for 225. Offsets matter, what are the choices?

[unplugged]

Originally Posted by swarb

question?
8's for 225. Offsets matter, what are the choices?

I emailed the company that sells the rims for offsets. I don't see these on rota's website. Not sure if they are discontinued or I missed them.

They only list 17x9 on web site

wheeldude.com

[swarb]

Originally Posted by unplugged

I emailed the company that sells the rims for offsets. I don't see these on rota's website. Not sure if they are discontinued or I missed them.

They only list 17x9 on web site

wheeldude.com

question?
17x9 +35
or 17x8 +22/48
Will all fit.
Call if you want a fast response. Otherwise wheeldude is known to be slow with emails.

[unplugged]

Originally Posted by swarb

question?
17x9 +35
or 17x8 +22/48
Will all fit.
Call if you want a fast response. Otherwise wheeldude is known to be slow with emails.

Looks like they are discontinued anyway. He might be getting last stock.

The other wheel is 18x8 Rota Tarmac 3 - Bronze 5x100 e48/56.1

Looks like Rota doesn't even come close to the offsets needed for our cars. Then again, not sure how much 28-32 to 48 offset looks like on the car

[Killerbee]

Originally Posted by unplugged

Looks like they are discontinued anyway. He might be getting last stock.

The other wheel is 18x8 Rota Tarmac 3 - Bronze 5x100 e48/56.1

Looks like Rota doesn't even come close to the offsets needed for our cars. Then again, not sure how much 28-32 to 48 offset looks like on the car

thats easy to tell

its all in mm, so +48 is 16mm more "inside the fender" than an +32