projekt zeal86 (build thread)

[weederr33]

Originally Posted by zeal86

I did consider the Greddy turbo kit but decided on the HKS. I only want to make 250hp - to 300hp safely.

__________________________________________


projekt zeal86 build

I was looking over the V3 Supercharger by HKS and it looks pretty nice actually. I also like that it uses the OEM intake

[zeal86]

Things I'm still working on:

I had installed my spoiler a bit rocked back causing the corners not to sit flush onto the decklid. I removed it by pulling wax string through the 3M tape. Worked great. I'll reinstall it soon.

I noticed an imperfection on my driver side skirt... so before I install it, I'm going to get it repainted.

After the aforementioned are repainted and installed I'll just be waiting on the front lip to arrive.

I'm also planning on installing the Intek high mount brake light soon. I'm part of a group buy here on the forum.

Looking to do a few other mods but I have not prioritized them yet.

__________________________________________


projekt zeal86 build

[Bramick]

I have a high brake light... not the Intek, and I really like it. So much more viewable space now

Sent from my Nexus 6P using Tapatalk

[zeal86]

Originally Posted by Bramick

I have a high brake light... not the Intek, and I really like it. So much more viewable space now

Sent from my Nexus 6P using Tapatalk

Just what I wanted to hear... Is your rear window tinted by chance? If so, have you had any issues installing the high mount brake light onto a tinted window?

__________________________________________


projekt zeal86 build

[zeal86]

Ordered a cool new part for my 86 today...It will be a few weeks before I receive it, so I can't comment on it just yet. I will post pics of the installation process, final pics, and a review of the product once installed.

Beatrush Air Intake Duct. I bought mine from @Kami Speed

http://www.kamispeed.com/Beatrush-Ai...r.s96400ad.htm













__________________________________________


projekt zeal86 build

[Koj]

nice mod & detailing.
if you need some info, or advice about the s/c hks v2/3, let me know.

[zeal86]

Originally Posted by Koj

nice mod & detailing.
if you need some info, or advice about the s/c hks v2/3, let me know.

Thanks for the comp... If I run into any issues during my install (whenever that happens), I'll take you up on the offer. I'm sure I'll have questions...

__________________________________________


projekt zeal86 build

[nova.86]

Just went through this thread, loving it, might take up that BBK when the time comes haha. Seriously though, you have the sickest wheels + BBK combo I've seen. GJ

[zeal86]

Originally Posted by nova.86

Just went through this thread, loving it, might take up that BBK when the time comes haha. Seriously though, you have the sickest wheels + BBK combo I've seen. GJ

Thanks for taking the time to read through my thread. My BBK is my favorite mod hands down! My brakes are the most unique part on my 86 and they really help to set off my wheels and profile. I do like my wheels but I wish they had a bit more lip. In the future I might upgrade.

Thanks again for the comp!

__________________________________________

projekt zeal86 build

[zeal86]

__________________________________________

Please follow me on Instagram @zeal.eightsix

The following is my current mod list.


Suspension/Wheels & Tires/Brakes:

- Beatrush type 1 (Fr.) strut bar
- Beatrush type 2 (Fr.) tower bars
- Beatrush (R) strut bar
- Beatrush (Fr.) beam brace
- Beatrush (Fr.) support under brace
- Beatrush (R) beam brace
- Beatrush (R) member support bar
- Beatrush (R) performance bars
- Beatrush 19mm swaybar (Fr.)
- Beatrush 15mm swaybar (R)
- Beatrush pillow top mount(s)
**Front (camber adjustable)
- Beatrush differential mount support bar
- Beatrush transmission mount bushing spacer
- RS*R Sports-i coilovers
- RS*R rear Lower control arms
__________________________________________

- Work XSA-04C - black polished (18x8.5 +41, 18x9.5 +42)
- Yokohama S-Drive (255/35/18 F, 265/35/18 R)
- Muteki tuner lugs (anodized red)
__________________________________________

- The Original Runduce BBK (6pot F / 4pot R): drilled and slotted, street pads, anodized red with silver lettering
- Grimmspeed master cylinder brace

Engine Performance/Cooling/Fluids:

- HKS supercharger pro kit v3
- HKS drop-in filter
- HKS EL exhaust manifold (catless)
- HKS dual resonated front pipe
- HKS air intake duct
- HKS (50003-M50HL) super fire racing spark plug
- OEM red aluminum intake manifold
- Velox billet fuel rail kit (anodized red)
- Velox fuel rail brackets (polished)
- Ark Grip exhaust w/polished tips
- Mishimoto oil catch can
- Mishimoto oil cooler kit (silver)
- Mishimoto performance radiator
- Mishimoto performance aluminum fan shroud
- Mishimoto aluminum coolant overflow tank
- Mishimoto radiator hose kit (black)
- Beatrush aluminum underpanel
- TrackSpec Hood Louver Kit
__________________________________________

- Eneos 5W-40 engine oil
- HKS traction fluid
- Motul RBF 600 brake fluid


Exterior:

- Uras / Monkey Magic aero kit: front lip spoiler, sideskirts, rear diffusers, & rear spoiler
- TRD front fender aero fins
- TRD front canard set
- APR Formula GT3 mirrors
- Beat-Sonic roof spoiler
- Beat-Sonic sharkfin antenna (37J)
- Beatrush (R) tow hook
- Helix crystal smoke side markers
- OEM Reverse Light Delete
- OEM fog light bezel air duct mod
- Custom license plate relocation
- Toyota badges


Interior/Electronics/Audio/Lighting/:

- Bride Zeta III in Red (2)
- Bride seat rails (2)
- HPI 6-Point and 4-point harnesses (black w/red stitching)
- Essex harness bar
- DAMD Japan leather D-shaped steering wheel (red formula)
- Custom rear seat delete w/hinged door
- Custom door strap pulls
- Loden 86 steering wheel overlay
- Beatrush duracon white shift knob
- Beatrush spin turn parking knob
- JDM red door grip handles, & red leather inner door sills
- JPM Coachworks Gauge cluster hood in black Alcantara leather with red stitching, A/C vent trim in black Alcantara leather with red stitching, red Alcantara leather shift boot with black stitching, red Alcantara leather emergency brake boot with black stitching
- Anodized red dual climate control knob covers
__________________________________________

- Shorai battery & KCMachine battery tray
- P3cars vent gauge
- BAFX OBD2 BT adapter w/rt. angle OBD2 splitter (Torque app)
- Roadshop BU camera kit
__________________________________________

- OEMAudio+ 400CF reference system
__________________________________________

- Intec LED high mount 3rd brake light
- Diode Dynamics tails as turn signal mod + reverse LEDs
- Diode Dynamics switchbacks
- HID LED mod
- LEDs throughout (int. & ext.)


Miscellaneous Mods:

- Cusco (1.3 bar) radiator cap
- Mishimoto oil cap (black)
- Fumoto Valve
- Supertek hood dampers
- Zeta Products armrest
- BRZ trunk finisher
- Toyota OEM remote key shell
- Satechi phone holder
__________________________________________


Future Mods:

- OS Giken Clutch /Flywheel

__________________________________________


Installs & Modifications

HKS v3 Supercharger Provisions & Install

HKS Spark Plugs Install

Rear Seat Delete - Template Fabrication / Pre-install

Quick-Latches Install

Back Up Camera Install

Reverse Light Assembly Delete Mod

Fog Light Bezel Duct Mod

Windshield Washer Reservoir Mod

License Plate Relocation Mod

Beatrush Suspension Products - Unboxing, Installs, & Reviews


__________________________________________


projekt zeal86 build

[zeal86]

__________________________________________


projekt zeal86 build

[zeal86]

I purchased an Intec high mount brake light via a group buy here on the forums (put together by @pansontw). The part can also be found HERE at the regular MSRP.

I installed the Intec LED high mount brake light yesterday. Only issue I had was reusing the factory pop clip that secures the Intec LED housing bracket... it would not catch because of the thickness of the bracket. Others were able to eventually secure the clip, I just purchased a longer clip at Ace Hardware. I finished off the install today by doing the following:

Covered the new clip and bracket with sticky-back felt.



Color match looks better in this pic...



Here is the stencil I created in Illustrator just in case anyone wants to try it. I purchased the sticky-back felt sheet at Michael's for $1.29.



Pics of the brake light on will come later.

__________________________________________


projekt zeal86 build

[zeal86]

In the last two days I have received some more Beatrush suspension goodies... they are as follows : transmission mount bushing spacer, differential mount support bar, front and rear sway bars. I'm only waiting on my Beatrush aluminum underpanel to arrive.

I will have my HKS v3 supercharger in late February or early March...however, I do not plan to install it until April sometime. I'll probably have to do some modifications to my oil cooler lines as well as my Beatrush air intake duct to make everything fit securely and cleanly.

Below are links to my new parts...

- Beatrush differential mount support bar
- Beatrush transmission mount bushing spacer
- Beatrush 19mm swaybar (Fr.)
- Beatrush 15mm swaybar (R)

let the installs begin...

__________________________________________


projekt zeal86 build

[weederr33]

It's awesome you're getting the HKS kit. Are you using their tune or are you getting it custom tuned?