what lugs nuts you guys are running? - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

WORKS · 03-06-2015, 03:46 PM

WORKS lug nuts

Over the years we've enjoyed the lightweight aspect of several different brands, but have been turned off when they don't last very long, required special tools or the special tool fails with repeated use. These were designed with track use in mind first, but also work for daily driving street cars. We have been selling them for over 6 years and have been used on countless street, track and race cars (such as USTCC racecars).

Billet machined from very durable 7075 Aircraft Aluminum that will not gall or bind like other unknown materials most lug nuts are made of. Then they go through a bead blasting and Type III Hard Anodization process which gives them their satin black finish, corrosion resistance and long-term durability.

Dezoris · 03-06-2015, 04:39 PM

Muteki SR48 open, on OEM and ARPs.

Joe-G · 03-09-2015, 02:49 AM

Kics Kyokugen chromoly open ended here. Been really good so far.I dont think I would ever use an aluminum nut unless its from a reputable manufacturer. Even then, they might last long, but they wont look too pretty after multiple abuse.

fatalelement · 03-09-2015, 05:13 AM

Quote:

Originally Posted by 1ofaKind

Amuse Titan lugnuts, best lugs and lightest lug nuts on the market.

Lol you can buy a set of basic wheels for less than those lugs, Powerhouse Amuse is gettin' real loose with that markup hahaha

Sent from my HTC One_M8 using Tapatalk

travisb · 11-09-2015, 07:18 AM

I just purchased Muteki 32905B SR Series Black 12mm x 1.25mm SR48 Open End Lug Nut Set and ARP wheel studs. I got these because I broke a couple studs changing my wheels back and forth for autox.

Will these lugs work on my stock wheels as well? If not, what are some open end lugs that will work on the stock wheels?

Summerwolf · 11-09-2015, 09:24 AM

Gorilla here, they look and work great.

wparsons · 11-09-2015, 09:34 AM

Quote:

Originally Posted by travisb

I just purchased Muteki 32905B SR Series Black 12mm x 1.25mm SR48 Open End Lug Nut Set and ARP wheel studs. I got these because I broke a couple studs changing my wheels back and forth for autox.

Will these lugs work on my stock wheels as well? If not, what are some open end lugs that will work on the stock wheels?

SR48's are fine on stock wheels, I run them all winter for my snows.

CatDaddysBBQ · 11-09-2015, 11:42 AM

I use the OEM ones on my OEM wheels with winter tires, and a set of Gorillas for the fair-weather wheels.

Gear_One_Performance · 11-10-2015, 11:17 AM

Cheap gorilla steel open ended nuts on ARP studs, They can take a beating and work well for us doing quick tire changes in pit stops.

smg1138 · 11-10-2015, 12:33 PM

Quote:

Originally Posted by wparsons

SR48's are fine on stock wheels, I run them all winter for my snows.

No rust issues?

wparsons · 11-10-2015, 12:43 PM

Quote:

Originally Posted by smg1138

No rust issues?

Not really. They have a tiny bit of surface rust on the outer surface, but nothing on the threads.

owenxguo · 11-11-2015, 03:18 AM

taiwan brand aluminum lugs, so far so good on both my BRZ and s2000 race cars, I am surprised, I guess torque setting is important.

Sleepless · 11-11-2015, 11:12 AM

+1 on Gorilla

03-06-2015, 03:46 PM	#29
WORKS Join Date: Feb 2014 Drives: WORKS CARB Legal Turbo BRZ Location: Sonoma Raceway - Bay Area Posts: 980 Thanks: 407 Thanked 646 Times in 350 Posts Mentioned: 31 Post(s)	WORKS lug nuts Over the years we've enjoyed the lightweight aspect of several different brands, but have been turned off when they don't last very long, required special tools or the special tool fails with repeated use. These were designed with track use in mind first, but also work for daily driving street cars. We have been selling them for over 6 years and have been used on countless street, track and race cars (such as USTCC racecars). Billet machined from very durable 7075 Aircraft Aluminum that will not gall or bind like other unknown materials most lug nuts are made of. Then they go through a bead blasting and Type III Hard Anodization process which gives them their satin black finish, corrosion resistance and long-term durability. __________________

03-06-2015, 04:39 PM	#30
Dezoris Senior Member Join Date: Aug 2012 Drives: FR-S Location: IL Posts: 2,857 Thanks: 519 Thanked 2,998 Times in 1,095 Posts Mentioned: 159 Post(s)	Muteki SR48 open, on OEM and ARPs. __________________ SAVAGEGEESE

03-09-2015, 02:49 AM	#31
Joe-G Canada Eh! Join Date: Nov 2013 Drives: '13 FRS Location: Calgary, AB Posts: 448 Thanks: 156 Thanked 231 Times in 120 Posts Mentioned: 3 Post(s)	Kics Kyokugen chromoly open ended here. Been really good so far.I dont think I would ever use an aluminum nut unless its from a reputable manufacturer. Even then, they might last long, but they wont look too pretty after multiple abuse. __________________

11-11-2015, 11:12 AM	#41
Sleepless Senior Member Join Date: Apr 2014 Drives: 2016 FR-S Location: Redmond, WA Posts: 640 Thanks: 299 Thanked 392 Times in 229 Posts Mentioned: 8 Post(s)	+1 on Gorilla __________________ Pete 14 Track BRZ (Build Thread) cmslaptimer.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How do you guys running 18x9.5 in the front do it?	ysr50guy	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	4	05-04-2014 01:49 PM
Closed Project Kick Revo Lug Nuts (closed) ARP Extended Lugs	Sportsguy83	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	6	02-25-2014 10:46 AM
BRZ stock lugs and lock nuts w/ key	scion dad	Wheels and Tires	0	09-15-2013 09:46 PM
what upgraded pads are you guys running?	ft86me	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	28	07-18-2013 12:22 PM
Stock Wheels and Gorrilla spline Lugs Nuts	USMC -FRS	Wheels and Tires	3	02-21-2013 01:32 PM

11-09-2015, 09:24 AM	#34
Summerwolf Panda Trueno Join Date: Jan 2015 Drives: No twin now. Location: North Indiana Posts: 3,349 Thanks: 2,113 Thanked 2,409 Times in 1,332 Posts Mentioned: 17 Post(s)	Gorilla here, they look and work great.

11-10-2015, 11:17 AM	#37
Gear_One_Performance Senior Member Join Date: Mar 2015 Drives: 2014 BRZ SCCA STU endurance car Location: West Chester, Pennsylvania Posts: 199 Thanks: 2 Thanked 142 Times in 82 Posts Mentioned: 1 Post(s)	Cheap gorilla steel open ended nuts on ARP studs, They can take a beating and work well for us doing quick tire changes in pit stops.

11-11-2015, 03:18 AM	#40
owenxguo Member Join Date: Mar 2014 Drives: MY13 BRZ Location: Bay Area Posts: 31 Thanks: 0 Thanked 11 Times in 5 Posts Mentioned: 0 Post(s)	taiwan brand aluminum lugs, so far so good on both my BRZ and s2000 race cars, I am surprised, I guess torque setting is important.

User Name		Remember Me?
Password