Car over boosted tonight : ( - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

SoCal80six · 11-09-2015, 01:08 AM

Was doing 2nd gear pulls for log and hit about 20 psi on a 7.5 psi map smh: ( lots of smoke and car won't start now ...

Sent from my SM-N920T using Tapatalk

azynneo · 11-09-2015, 01:15 AM

EAGLE5 · 11-09-2015, 01:24 AM

Time for a V8!

Trac Toy · 11-09-2015, 01:24 AM

Time for a new piston or four...

Either torched a hole in em or crushed the ring lands I would think...

SoCal80six · 11-09-2015, 01:38 AM

Quote:

Originally Posted by jsimon7777

Time for a V8!

Would be better and less stressful

Sent from my SM-N920T using Tapatalk

SoCal80six · 11-09-2015, 01:40 AM

Quote:

Originally Posted by Trac Toy

Time for a new piston or four...

Either torched a hole in em or crushed the ring lands I would think...

Yea it sucks only should've been running 7.5 psi but it kept going up. Hoping rod didn't go through block seen a little oil not sure if it came from dump tube or what.

Sent from my SM-N920T using Tapatalk

EAGLE5 · 11-09-2015, 01:46 AM

Quote:

Originally Posted by SoCal80six

Would be better and less stressful

I know this sucks, but it is also an opportunity to be more awesome than ever before. I'll just leave this here:
http://www.cxracing.com/mm5/merchant...ry_Code=ESKSUB

SoCal80six · 11-09-2015, 01:49 AM

Quote:

Originally Posted by jsimon7777

I know this sucks, but it is also an opportunity to be more awesome than ever before. I'll just leave this here:
http://www.cxracing.com/mm5/merchant...ry_Code=ESKSUB

Thanks man appreciate it and that's very true always room for improvement.

Sent from my SM-N920T using Tapatalk

Docmattic · 11-09-2015, 03:31 AM

That sucks mate

good luck with the rebuild or whatever you choose to do.
If you don't mind me asking what kit were you running?

SoCal80six · 11-09-2015, 03:51 AM

Quote:

Originally Posted by Docmattic

That sucks mate

good luck with the rebuild or whatever you choose to do.
If you don't mind me asking what kit were you running?

Was running a maperformance kit with precision 5858 turbo

Sent from my SM-N920T using Tapatalk

SoCal80six · 11-09-2015, 03:53 AM

Quote:

Originally Posted by Docmattic

That sucks mate

good luck with the rebuild or whatever you choose to do.
If you don't mind me asking what kit were you running?

Been running great for the past month but switched map to run 7.5 on e85 instead of 11.5 and for some reason over boosted tonight.

Sent from my SM-N920T using Tapatalk

GsxrMe · 11-09-2015, 07:09 AM

I'm interested to know what vacuum line popped off. Evap?

Sportsguy83 · 11-09-2015, 07:11 AM

Quote:

Originally Posted by jsimon7777

I know this sucks, but it is also an opportunity to be more awesome than ever before. I'll just leave this here:
http://www.cxracing.com/mm5/merchant...ry_Code=ESKSUB

Dat China Express quality though...

Sportsguy83 · 11-09-2015, 07:12 AM

Quote:

Originally Posted by SoCal80six

Was doing 2nd gear pulls for log and hit about 20 psi on a 7.5 psi map smh: ( lots of smoke and car won't start now ...

Sent from my SM-N920T using Tapatalk

Your tune should have had over boost protection built into it, extremely easy for a tuner to set it up as long as you have an aftermarket MAP sensor....

(Assuming you're tuned with Ecutek)

11-09-2015, 01:08 AM	#1
SoCal80six Senior Member Join Date: Aug 2015 Drives: Asphalt frs Location: San diego, CA Posts: 354 Thanks: 226 Thanked 80 Times in 62 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Car over boosted tonight : ( Was doing 2nd gear pulls for log and hit about 20 psi on a 7.5 psi map smh: ( lots of smoke and car won't start now ... Sent from my SM-N920T using Tapatalk

11-09-2015, 01:24 AM	#4
Trac Toy Senior Member Join Date: Sep 2012 Drives: 2013 FR-S Location: Durham Region, Canukistan. Posts: 506 Thanks: 224 Thanked 154 Times in 111 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Time for a new piston or four... Either torched a hole in em or crushed the ring lands I would think... __________________ .o0+Eric+0o. 2016 Chrysler 200S 3.6 2013 FRS 6MT

11-09-2015, 07:09 AM	#12
GsxrMe Senior Member Join Date: Jul 2015 Drives: Late 2014 Subaru BRZ Location: Cape Coral, FL Posts: 557 Thanks: 20 Thanked 184 Times in 139 Posts Mentioned: 5 Post(s) Tagged: 2 Thread(s)	I'm interested to know what vacuum line popped off. Evap? __________________ 2014 Subaru BRZ FBM Turbokit: GTX3076R - ECUTEK HRI FlexFuel tune - FBM 3" Turboback Exhaust - 550cc Injectors - Walbro 485 Fuel Pump - 4bar Map Sensor - FBM Oil Pan - ACT SB7-XTSS - AMSOIL all fluids - Forester XT Oil Cooler - Cusco engine, trans mounts - Whiteline rear differential bushings - Perrin shifter bushing - Firehawk 235/45/17 - AEM Failsafe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted's BRZ	Boosted	Member's Car Journals	41	11-05-2018 09:32 PM
About to be boosted!	willharp360	Forced Induction	18	06-04-2015 10:15 AM
Boosted!	FRS-cotty	Northwest	21	03-13-2015 10:02 PM
My Boosted BRZ	protpibe	Member's Car Journals	84	09-22-2014 03:26 PM
Boosted BRZ	mike the snake	Member's Car Journals	3	12-28-2013 11:11 AM

11-09-2015, 01:15 AM	#2
azynneo Senior Member Join Date: Jan 2014 Drives: FR-S Location: Cali Posts: 582 Thanks: 50 Thanked 44 Times in 34 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)

11-09-2015, 03:31 AM	#9
Docmattic Member Join Date: Jan 2015 Drives: GT 86 Location: Earth Posts: 50 Thanks: 0 Thanked 7 Times in 6 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	That sucks mate good luck with the rebuild or whatever you choose to do. If you don't mind me asking what kit were you running?

User Name		Remember Me?
Password