Car over boosted tonight : (
 

Was doing 2nd gear pulls for log and hit about 20 psi on a 7.5 psi map smh: ( lots of smoke and car won't start now ... :(
http://images.tapatalk-cdn.com/15/11...96475ea57f.jpg

Sent from my SM-N920T using Tapatalk

:(

Time for a V8!

Time for a new piston or four...


Either torched a hole in em or crushed the ring lands I would think...

Would be better and less stressful:(

Sent from my SM-N920T using Tapatalk

Yea it sucks only should've been running 7.5 psi but it kept going up. Hoping rod didn't go through block seen a little oil not sure if it came from dump tube or what.

Sent from my SM-N920T using Tapatalk

I know this sucks, but it is also an opportunity to be more awesome than ever before. I'll just leave this here:
http://www.cxracing.com/mm5/merchant...ry_Code=ESKSUB

Thanks man appreciate it and that's very true always room for improvement.

Sent from my SM-N920T using Tapatalk

That sucks mate :( good luck with the rebuild or whatever you choose to do.
If you don't mind me asking what kit were you running?

Was running a maperformance kit with precision 5858 turbo

Sent from my SM-N920T using Tapatalk

Been running great for the past month but switched map to run 7.5 on e85 instead of 11.5 and for some reason over boosted tonight.

Sent from my SM-N920T using Tapatalk

I'm interested to know what vacuum line popped off. Evap?

Dat China Express quality though...

Your tune should have had over boost protection built into it, extremely easy for a tuner to set it up as long as you have an aftermarket MAP sensor....

(Assuming you're tuned with Ecutek)