WHAT DID YOU DO TO YOUR FRS TODAY? - Page 869 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Figo · 10-23-2015, 12:04 AM

The girlfriend think my exhaust is too loud.

So I decide to do something to save the relationship.

I plan to cover the trunk and doors. These might add about 10 lb weight, not too bad.

.

Jonesy86 · 10-23-2015, 12:45 AM

Installed trd louvres a little over a week ago. Kept it a secret until a meet on Sunday.

fatalelement · 10-23-2015, 01:29 AM

Quote:

Originally Posted by Figo

The girlfriend think my exhaust is too loud.

So I decide to do something to save the relationship.

I plan to cover the trunk and doors. These might add about 10 lb weight, not too bad.

.

Good luck - I did a lot of stuff to reduce my old exhaust's aggressive drone and almost nothing worked except a silencer or a new exhaust. Drone usually is resonance of the exhaust pipe itself and nearby components rather than anything in the car you can deaden.

Let us know how it goes!

Sent from my SAMSUNG-SM-G925A using Tapatalk

Figo · 10-23-2015, 01:41 AM

Quote:

Originally Posted by fatalelement

Good luck - I did a lot of stuff to reduce my old exhaust's aggressive drone and almost nothing worked except a silencer or a new exhaust. Drone usually is resonance of the exhaust pipe itself and nearby components rather than anything in the car you can deaden.

Let us know how it goes!

Sent from my SAMSUNG-SM-G925A using Tapatalk

Will try it. I will also uput some on the door to reduce the road/wind noise on highway. Only 10+lb not too bad. So worth to try.

thecarfilmer · 10-23-2015, 03:20 AM

Finally a part that's not going to be stock anymore. Hopefully I'll be able to install it this weekend!

imaguitar · 10-23-2015, 03:30 AM

Quote:

Originally Posted by thecarfilmer

Finally a part that's not going to be stock anymore. Hopefully I'll be able to install it this weekend!

What'd ya get! Q300? N1?

thecarfilmer · 10-23-2015, 04:10 AM

N1!

Quote:

Originally Posted by imaguitar

What'd ya get! Q300? N1?

GT86Asia · 10-23-2015, 11:46 AM

Alright, as promised, some photos.

Alright, I finished up everything today actually.

I had installed the EUL headers, S pipe, Straight pipe, together with the catback electro valve exhaust I had.

The result was....just a non pleasent and super loud noise.

as soon as the rpms hit 3000, it was like...just stupid noise coming out of my gt86's ass.

So I was like, screw that. So I ended up taking off the straight pipe, and putting back the one with the cat and noise reduccion box pipe.

To my relief, the noise changed from a stupidly loud moped sound, to a deep growl but still as loud as with the aftermarket straight pipe once I hit 6000+ rpms, which I'm fine with that...it should be loud if I decided to rev up that high, haha.

Anyway, i'm super happy with the setup now, there is absolutely no torque dip anywhere now, and the car really goes.

Here is my current setup:
Crawford Power blocks
Perrin 3.0 CAI
EUL Headers+S pipe+Catback exhaust
Stage 2 tune for EUL headers on 95 pump gas
19" wheels, 245/35 front, 255/35 rear
Border shocks
front / rear strut bars
under chasis 7 piece brace kit
7 piece light weight pulley kit
Carbon fiber Driveshaft

I changed out the transmission fluid and the diferential fluid....boy just at 2000 miles, they were both BLACK GOOE, just discusting. Advice to everything to change their fluids and put something for higher performance in there.

Yeahp, that's it for now. i'll be installing the Edelbrock SC in December, already placed order. Super stoked for this!!!!! Christmas present, haha.

Cheers to all!

MisterSheep · 10-23-2015, 11:50 AM

Quote:

Originally Posted by thecarfilmer

Finally a part that's not going to be stock anymore. Hopefully I'll be able to install it this weekend!

If you need help let me know I'm from your area.

MisterSheep · 10-23-2015, 11:52 AM

Quote:

Originally Posted by GT86Asia

19" wheels, 245/35 front, 255/35 rear

In for pics of 19s on a frs.

JDsThatGuy · 10-23-2015, 12:21 PM

Quote:

Originally Posted by MisterSheep

In for pics of 19s on a frs.

MisterSheep · 10-23-2015, 12:25 PM

Quote:

Originally Posted by JDsThatGuy

Looks good!

Maaad86 · 10-23-2015, 01:08 PM

WELL it took me like three days but here is what I did in a nutshell
Name: ImageUploadedByTapatalk1445616509.404248.jpg
Views: 1643
Size: 210.2 KB

Anyone have an extra Subaru deck they dont need out there 😁?

Sent from my iPhone using Tapatalk

MisterSheep · 10-23-2015, 01:13 PM

Quote:

Originally Posted by Maaad86

WELL it took me like three days but here is what I did in a nutshell
Attachment 123379

Anyone have an extra Subaru deck they dont need out there ��?

Sent from my iPhone using Tapatalk

It's definately different i'll give you that. Good job

10-23-2015, 12:04 AM	#12153
Figo Senior Member Join Date: Jun 2013 Drives: Vortech Supercharged FR-S Location: Central Jersey Posts: 1,515 Thanks: 597 Thanked 934 Times in 428 Posts Mentioned: 17 Post(s) Tagged: 1 Thread(s)	The girlfriend think my exhaust is too loud. So I decide to do something to save the relationship. I plan to cover the trunk and doors. These might add about 10 lb weight, not too bad. . __________________ I'd rather lose by a mile because I built my own car, than win by an inch because someone else built it for me. Your car is your story, so don't let someone else write the book. ( White Tiger ) - FiGo's 車誌.

10-23-2015, 12:45 AM	#12154
Jonesy86 Senior Member Join Date: Aug 2014 Drives: innovate sc frs Location: Portland Posts: 566 Thanks: 177 Thanked 315 Times in 181 Posts Mentioned: 82 Post(s) Tagged: 0 Thread(s)	Installed trd louvres a little over a week ago. Kept it a secret until a meet on Sunday. Attached Images __________________ Corn fed, Intercooled Innovate sc tuned by vit viper, perrin crank pulley, raceng 72.5 mm pulley, Tomei EL header, Perrin front/mid pipe and 2.5 resonated exhaust, Cusco oil cooler, dual radium catch cans and more!

10-23-2015, 11:46 AM	#12160
GT86Asia Senior Member Join Date: Oct 2015 Drives: 2016 BRZ Location: San Diego Posts: 156 Thanks: 7 Thanked 64 Times in 34 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Alright, as promised, some photos. Alright, I finished up everything today actually. I had installed the EUL headers, S pipe, Straight pipe, together with the catback electro valve exhaust I had. The result was....just a non pleasent and super loud noise. as soon as the rpms hit 3000, it was like...just stupid noise coming out of my gt86's ass. So I was like, screw that. So I ended up taking off the straight pipe, and putting back the one with the cat and noise reduccion box pipe. To my relief, the noise changed from a stupidly loud moped sound, to a deep growl but still as loud as with the aftermarket straight pipe once I hit 6000+ rpms, which I'm fine with that...it should be loud if I decided to rev up that high, haha. Anyway, i'm super happy with the setup now, there is absolutely no torque dip anywhere now, and the car really goes. Here is my current setup: Crawford Power blocks Perrin 3.0 CAI EUL Headers+S pipe+Catback exhaust Stage 2 tune for EUL headers on 95 pump gas 19" wheels, 245/35 front, 255/35 rear Border shocks front / rear strut bars under chasis 7 piece brace kit 7 piece light weight pulley kit Carbon fiber Driveshaft I changed out the transmission fluid and the diferential fluid....boy just at 2000 miles, they were both BLACK GOOE, just discusting. Advice to everything to change their fluids and put something for higher performance in there. Yeahp, that's it for now. i'll be installing the Edelbrock SC in December, already placed order. Super stoked for this!!!!! Christmas present, haha. Cheers to all! Attached Images Last edited by GT86Asia; 10-23-2015 at 11:54 AM. Reason: forgot to add some stuff

10-23-2015, 01:08 PM	#12165
Maaad86 Member Join Date: Jun 2015 Drives: 2013 Toyota 86 Location: Gilbert/Chandler Posts: 76 Thanks: 32 Thanked 21 Times in 16 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	WELL it took me like three days but here is what I did in a nutshell Anyone have an extra Subaru deck they dont need out there 😁? Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 01:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 05:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 07:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 02:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 11:19 PM

User Name		Remember Me?
Password