Re install of stock intake help - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

kmac_brz · 08-22-2015, 01:41 PM

Hey all, putting my stock intake back on and the breather tube that goes near the battery I cannot find anything for it to connect to. My assumption is the valve cover but can't find anything. I'm doing this now so any help asap would be greatly appreciated

EXCellR8 · 08-22-2015, 01:57 PM

i don't recall having to reconnect any hoses when i installed my intake, aside from this one...

what other mods have you done?

ls1ac · 08-22-2015, 02:41 PM

near the battery? could it be the sound tube? down to the firewall.

kmac_brz · 08-22-2015, 03:54 PM

Quote:

Originally Posted by EXCellR8

i don't recall having to reconnect any hoses when i installed my intake, aside from this one...

what other mods have you done?

It is the sound tube, I think I found that it goes into the fire wall under the battery tray. Sound right?

Chanpion · 08-23-2015, 04:31 PM

That tube is the sound tube.
http://www.ft86club.com/forums/showthread.php?t=30659 Just reverse engineer/ steps of what these peeps did. I believe since you don't have the tube install, there should be a hole. The hole is in the passenger footwell, top center, just peel back the cover a bit. Plug the tube back into the wall but on the engine side.
It doesn't do anything except pipe in induction sound into the cabin, which isn't the best sounding in this car and just makes everything noisier so you can decide to keep it off. But make sure you cap it off where the sound tube meets the intake.

08-22-2015, 01:41 PM	#1
kmac_brz Member Join Date: Jul 2015 Drives: 14 WRB BRZ Location: Orange County NY Posts: 50 Thanks: 9 Thanked 3 Times in 3 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Re install of stock intake help Hey all, putting my stock intake back on and the breather tube that goes near the battery I cannot find anything for it to connect to. My assumption is the valve cover but can't find anything. I'm doing this now so any help asap would be greatly appreciated

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Cusco Oil Catch Can 965 010 A	JPxM0Dz	Canada Classifieds	25	09-06-2015 08:58 PM
OFT reflash post intake install?	dar3d3vil	Software Tuning	13	04-07-2015 12:43 AM
Perrin intake install	Juggles	Arizona	4	01-04-2015 05:16 PM
GReddy Intake Install	eddieEndo	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	0	11-14-2013 12:50 AM
Sluggish/Stalling After aFe Intake Install	FR-S Matt	Engine, Exhaust, Transmission	6	01-15-2013 09:57 PM

08-23-2015, 04:31 PM	#5
Chanpion Senior Member Join Date: Sep 2014 Drives: 13 FRS Satin Location: Alberta Posts: 162 Thanks: 25 Thanked 60 Times in 41 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	That tube is the sound tube. http://www.ft86club.com/forums/showthread.php?t=30659 Just reverse engineer/ steps of what these peeps did. I believe since you don't have the tube install, there should be a hole. The hole is in the passenger footwell, top center, just peel back the cover a bit. Plug the tube back into the wall but on the engine side. It doesn't do anything except pipe in induction sound into the cabin, which isn't the best sounding in this car and just makes everything noisier so you can decide to keep it off. But make sure you cap it off where the sound tube meets the intake.

User Name		Remember Me?
Password