Re install of stock intake help
 

Hey all, putting my stock intake back on and the breather tube that goes near the battery I cannot find anything for it to connect to. My assumption is the valve cover but can't find anything. I'm doing this now so any help asap would be greatly appreciated

i don't recall having to reconnect any hoses when i installed my intake, aside from this one...

http://www.ft86club.com/forums/attac...1&d=1354232583

what other mods have you done?

near the battery? could it be the sound tube? down to the firewall.

It is the sound tube, I think I found that it goes into the fire wall under the battery tray. Sound right?

That tube is the sound tube.
http://www.ft86club.com/forums/showthread.php?t=30659 Just reverse engineer/ steps of what these peeps did. I believe since you don't have the tube install, there should be a hole. The hole is in the passenger footwell, top center, just peel back the cover a bit. Plug the tube back into the wall but on the engine side.
It doesn't do anything except pipe in induction sound into the cabin, which isn't the best sounding in this car and just makes everything noisier so you can decide to keep it off. But make sure you cap it off where the sound tube meets the intake.