Now Available: OpenFlash Tablet G-Meter and Performance Driving Pack

[nunonuna]

Originally Posted by elBarto

Is there anyway to create presets for the logging channels?
So people can switch between car logging and trackday logging.

+1 this
I was gonna ask for same thing~

[troek]

awesome stuff, hope this works on my A series rom

[steve99]

Originally Posted by troek

awesome stuff, hope this works on my A series rom

It should be fine as i believe the oft is asking the vsc\abs computer for the "driving" info not the engine ecu so will be independant of ecu rom type.

[Shiv@Openflash]

Quick update: D00D and D00C calibration IDs will be able to log Ignition Advance Multiplier and MAF Voltage by tomorrow morning

[DAEMANO]

Originally Posted by elBarto

Is there anyway to create presets for the logging channels?
So people can switch between car logging and trackday logging.

Originally Posted by nunonuna

+1 this I was gonna ask for same thing~

I would love presets as well. A handful of slots where we could set a custom name and then assign channels to those names.

[Shiv@Openflash]

Originally Posted by DAEMANO

I would love presets as well. A handful of slots where we could set a custom name and then assign channels to those names.

This is something I've been thinking of for a while. I think it will be implemented as soon as we catch up with our ever-growing To Do list

[DAEMANO]

Originally Posted by Shiv@Openflash

This is something I've been thinking of for a while. I think it will be implemented as soon as we catch up with our ever-growing To Do list

Thanks man. The public is always demanding more, somehow you keep on delivering. Always appreciated.

[Shiv@Openflash]

Originally Posted by DAEMANO

Thanks man. The public is always demanding more, somehow you keep on delivering. Always appreciated.

Thanks we try

[cameronjones239]

Originally Posted by Shiv@Openflash

Quick update: D00D and D00C calibration IDs will be able to log Ignition Advance Multiplier and MAF Voltage by tomorrow morning

Any idea on expected time frame for launch control and flat foot shifting for D00C roms?

[Shinobu's Smile]

Originally Posted by Shiv@Openflash

Quick update: D00D and D00C calibration IDs will be able to log Ignition Advance Multiplier and MAF Voltage by tomorrow morning

Will this be in the form of an updated template file or one of these automatic downloads that occur when you simply plug the OFT in and launch the Manager software?

[Shiv@Openflash]

Originally Posted by Shinobu's Smile

Will this be in the form of an updated template file or one of these automatic downloads that occur when you simply plug the OFT in and launch the Manager software?

Just connect your OFT to OpenFlash Manager with a WIFI connection and let the OFT updates take place. At that point, the OFT will log those two channels correctly. No need to update Template file if you have done so already.

[OnkelC]

OT:
why WIFI? Mine's been updated from 1.56 to current, all via LAN

[Wepeel]

I finally got a chance to try this out... totally awesome. For now it's delayed my desire to get a full data acq setup. I've been playing with overlaying the data onto some vids:
[ame="https://www.youtube.com/watch?v=zIAFdezZOk0"]Fedex Autocross 2015-10-18 w/Data - YouTube[/ame]

It's really useful to see all that data in the context of the run (sloppy run but it was 43 degrees). I will keep playing around with adding more gauges/meters. It would be cool to have oil temp / AFR / IAM / load information on there too.

I think the only thing remaining that I want would be GPS-based position/speed. For these runs I logged Road Speed and Rear Wheel Speeds, so wheelslip affects speed readings. Probably if I had the front wheel speeds that would be more indicative of real vehicle speed.

@Shiv@Openflash Any potential for more than 14 channels in a future upgrade?

[RacerX661]

where can I find this templet? the link does not work