Raceseng | KW + Raceseng Coilover Package - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

wparsons · 05-15-2015, 03:44 PM

Amazing! I might be stopping by the race at some point, if it's looking like that's the case I'll shoot you a PM to see if I can get in touch to say hi (if he's not too busy).

Racecomp Engineering · 05-15-2015, 03:45 PM

Quote:

Originally Posted by wparsons

Amazing! I might be stopping by the race at some point, if it's looking like that's the case I'll shoot you a PM to see if I can get in touch to say hi (if he's not too busy).

Sounds good!

- andrew

OkieSnuffBox · 05-15-2015, 10:39 PM

Racecomp, figure it out. Those KW3 rates are way too low for HPDE/AutoX people on wide sticky tires!

Calum · 05-16-2015, 11:59 AM

What advantage does this product have over buying the same pieces individually.

Calum · 05-16-2015, 12:02 PM

Quote:

Originally Posted by OkieSnuffBox

Racecomp, figure it out. Those KW3 rates are way too low for HPDE/AutoX people on wide sticky tires!

Are you suggesting that Racecomp should fix the issue?

churchx · 05-16-2015, 12:18 PM

OkieSnuffBox: Different kits are made for different purposes/customers. I haven't seen any rules set in stone that each and every aftermarket coilover kit should be designed/made/optimized/sold for track racing. Especially if daily driving crowd may outnumber racers by a lot.

x1UP · 05-16-2015, 01:55 PM

If I weren't getting Ohlins, I would most definitely have gotten these because.. @Raceseng.

rlpaul · 05-16-2015, 03:00 PM

Quote:

Originally Posted by x1UP

If I weren't getting Ohlins, I would most definitely have gotten these because.. @Raceseng.

Agreed. Wish Ohlins came without plates, as I'd like to get them with the Raceseng plates instead.

wparsons · 05-16-2015, 05:18 PM

Quote:

Originally Posted by Calum

What advantage does this product have over buying the same pieces individually.

One payment, one shipment.

Calum · 05-16-2015, 05:19 PM

Quote:

Originally Posted by wparsons

One payment, one shipment.

FT86speedfactory can provide that.

Raceseng · 05-18-2015, 10:20 AM

Quote:

Originally Posted by Calum

What advantage does this product have over buying the same pieces individually.

This package is the same as buying them individually. We simply wanted to offer our potential top mount customers an integrated solution.

CSG David · 05-18-2015, 01:21 PM

Quote:

Originally Posted by Raceseng

This package is the same as buying them individually. We simply wanted to offer our potential top mount customers an integrated solution.

The plates have been great for us and our clients. No reported failures on our end and you already know how many got sold through us.

Hope we can work on some projects for you in the future.

h3opama · 05-22-2015, 11:08 PM

Quote:

Originally Posted by Racecomp Engineering

You need to double check the spring rates on your KWs. They have not sold V3s with 343/400 lbs/in spring rates in a while.

The correct spring rates are 230/285 and judging from the pics on your website, that's what you have. I can see the marking on the rear spring.

Most shops are still advertising the wrong spring rates and that bothers me since it misleads customers, but you just need to look at the springs...

- Andrew

How can you tell that the rates are 230/285 instead of 343/400 in the picture?

Racecomp Engineering · 05-23-2015, 10:26 PM

Quote:

Originally Posted by h3opama

How can you tell that the rates are 230/285 instead of 343/400 in the picture?

I could see the writing on the springs on the pics in their website.

- Andrew

05-16-2015, 01:55 PM	#21
x1UP One & Done (AOZORA) Join Date: Jun 2014 Drives: '15 Series.Blue BRZ (WRB) Location: New York City Posts: 932 Thanks: 340 Thanked 217 Times in 160 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	If I weren't getting Ohlins, I would most definitely have gotten these because.. @Raceseng. __________________ "I have the need....the need for speed! - Maverick (Top Gun)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: New Raceseng Cam Plate	FT86POWER	Engine, Exhaust, Bolt-Ons	2	08-13-2014 02:42 PM
Raceseng cam plate	grostoine	Engine, Exhaust, Transmission	5	12-09-2013 04:28 PM
Raceseng \| Go Pro Tow Hook	Raceseng	Cosmetic Modification (Interior/Exterior/Lighting)	18	11-23-2013 03:25 AM
Raceseng \| Tug Tow Hook	Raceseng	Cosmetic Modification (Interior/Exterior/Lighting)	3	09-24-2013 10:21 AM
Raceseng \| Tug Tow Hook	Raceseng	Tracking / Autocross / HPDE / Drifting	9	08-21-2013 09:19 AM

05-15-2015, 10:39 PM	#17
OkieSnuffBox Senior Member Join Date: Aug 2014 Drives: '23 BRZ Limited Location: OKC, OK Posts: 1,987 Thanks: 660 Thanked 1,230 Times in 703 Posts Mentioned: 9 Post(s) Tagged: 1 Thread(s)	Racecomp, figure it out. Those KW3 rates are way too low for HPDE/AutoX people on wide sticky tires!

05-16-2015, 11:59 AM	#18
Calum That Guy Join Date: Dec 2011 Drives: 2013 asphalt FRS MT Location: Halifax, Nova Scotia Posts: 4,865 Thanks: 5,058 Thanked 2,867 Times in 1,499 Posts Mentioned: 82 Post(s) Tagged: 1 Thread(s)	What advantage does this product have over buying the same pieces individually.

05-16-2015, 12:18 PM	#20
churchx Senior Member Join Date: Mar 2015 Drives: 2014 GT86 Location: Latvia, Riga Posts: 4,333 Thanks: 696 Thanked 2,086 Times in 1,436 Posts Mentioned: 53 Post(s) Tagged: 1 Thread(s)	OkieSnuffBox: Different kits are made for different purposes/customers. I haven't seen any rules set in stone that each and every aftermarket coilover kit should be designed/made/optimized/sold for track racing. Especially if daily driving crowd may outnumber racers by a lot.

User Name		Remember Me?
Password