12-30-2014, 08:00 PM | #1 |
Senior Member
Join Date: Jan 2013
Drives: FR-S 2013 Asphalt
Location: Lexington, KY
Posts: 226
Thanks: 89
Thanked 65 Times in 35 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
FS: Rear Seat Delete + two 12" subwoofers
UPDATE: 05/04/15
One sub available. Last one going for $150 shipped due to light scratching noise when getting near xmechanical. (~18mm one way). Still cosmetically a 10. If you keep it within xmax there is still no noise on this last sub. Box still available for $800 shipped. UPDATE: 05/01/15 Three subs available. $225 each, shipped price. Box is $800. Original post: Two 12" subwoofer setup for rear seat of FRS/BRZ. Subwoofers: http://stereointegrity.com/product/b...-12-subwoofer/ Box built by me. Sits flush in the backseat very very snugly, and is ready to go for finishing with whatever method you want to use. The seat back still folds completely flat. I've done all of the hard work. All you have to do is put your choice of upholstery on it, or leave it unfinished. These subs are 12lbs each and the fiberglass/wood box doesn't weigh much at all. Extremely rigid box, I used woven mat and epoxy for this build. The putty in the center is epoxy putty and adds to the strength of the seam. Pictures: $1200 shipped. Here is a link to my build thread, pictures of this box start on page 2. http://www.ft86club.com/forums/showthread.php?t=66561 Last edited by AtlasMick; 05-04-2015 at 10:13 AM. Reason: Update information |
01-15-2015, 12:55 PM | #2 |
Senior Member
Join Date: Jan 2013
Drives: FR-S 2013 Asphalt
Location: Lexington, KY
Posts: 226
Thanks: 89
Thanked 65 Times in 35 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
This guy is still available. It is crazy powerful with just these two subs, and they can knock the mirror off the windshield.
|
02-28-2015, 02:06 PM | #3 |
Senior Member
Join Date: Jan 2013
Drives: FR-S 2013 Asphalt
Location: Lexington, KY
Posts: 226
Thanks: 89
Thanked 65 Times in 35 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
Still available.
|
03-31-2015, 05:45 PM | #4 |
Senior Member
Join Date: Jan 2013
Drives: FR-S 2013 Asphalt
Location: Lexington, KY
Posts: 226
Thanks: 89
Thanked 65 Times in 35 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
I've done all of the hard work. All you have to do is put your choice of upholstery on it, or leave it unfinished. These subs are 12lbs each and the fiberglass/wood box doesn't weigh much at all. Extremely rigid box, I used woven mat and epoxy for this build. The putty in the center is epoxy putty and adds to the strength of the seam.
Still available. |
04-05-2015, 10:00 PM | #5 |
First 86 Driver Baby!
Join Date: Jan 2012
Drives: FR-S, Flex
Location: Williamsburg, VA
Posts: 1,752
Thanks: 509
Thanked 513 Times in 349 Posts
Mentioned: 32 Post(s)
Tagged: 3 Thread(s)
|
Why did you decide to part with this setup?
|
04-26-2015, 04:16 PM | #6 |
Senior Member
Join Date: Jan 2013
Drives: FR-S 2013 Asphalt
Location: Lexington, KY
Posts: 226
Thanks: 89
Thanked 65 Times in 35 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
I actually totaled my car in February. I've been commuting on my motorcycle since then and have found that for my needs 90% of the time a motorcycle is a better choice, I lane split so traffic time is a quarter of the time it used to be, I have rock bottom rate insurance and the crash didn't affect my cycle policy. The other 9% I figure out ways to make the motorcycle work for things a car does better. The last 1% I just bum rides.
Anyway, this is still available. I plan on possibly purchasing another FRS in the future but it would be for more of a hooning car and I don't want this thing to sit and waste for what might be a decade. By then who knows, we might not even have gas for cars by then. |
05-01-2015, 12:26 AM | #7 |
Senior Member
Join Date: Jan 2013
Drives: FR-S 2013 Asphalt
Location: Lexington, KY
Posts: 226
Thanks: 89
Thanked 65 Times in 35 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
Willing to part these pieces out now. I've got a total of three BM mkIV subs and this one fiberglass box.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Shrader Performance Rear Seat Delete Kit & Rear Seat Removal | PoorMansRacing | DIY (Do-It-Yourself) Guides | 98 | 10-10-2023 04:51 PM |
Has anyone used this rear seat delete kit? | OkieSnuffBox | Cosmetic Modification (Interior/Exterior/Lighting) | 19 | 10-24-2015 03:40 PM |
Rear seat delete? | s30series | Cosmetic Modification (Interior/Exterior/Lighting) | 12 | 11-16-2014 11:13 PM |
Rear Seat Delete | ML | Interior Parts (Incl. Lighting) | 21 | 04-25-2014 12:35 PM |
"Clicking" or "knocking" caused by rear seat pull down lever. | husker741 | Issues | Warranty | Recalls / TSB | 6 | 11-27-2013 02:30 PM |