OFFICIAL Torque Android app PID/Misc Thread

[zoth]

Originally Posted by texasbound972

Anyone use the ethanol gauge? Mine doesn't work. Figure it would with the delicious tuning flex fuel kit.

you mean you changed the fuel type in torque to E85?

[texasbound972]

I did.

[zoth]

Originally Posted by texasbound972

I did.

Check with your to tuner, turned of.

Sent from my SM-N900T using Tapatalk

[BRZZZZZZZZZZ]

Nevermind fixed my problem

[Kostamojen]

I'm trying to upload a video from Track Recorder, but for some reason now my TorqueSync isn't uploading the RECENT videos its only showing old ones that were already encoded...

Anyone know whats wrong, or know where I can check for more info? Can't find a good resource for Track Recorder issues.

[mit_peid]

Do you guys think the boost reading would be correct even if I swapped the OEM MAP sensor (which I believe is Denso 2 bar) for an aftermarket kraftwerks 4-bar MAP sensor?

[Kodename47]

Originally Posted by mit_peid

Do you guys think the boost reading would be correct even if I swapped the OEM MAP sensor (which I believe is Denso 2 bar) for an aftermarket kraftwerks 4-bar MAP sensor?

If it's setup in the ROM correctly then it'll display correctly.

[mit_peid]

Originally Posted by Kodename47

If it's setup in the ROM correctly then it'll display correctly.

How can one tell if it is set up in the ROM correctly?


Sent from my iPhone using Tapatalk

[Kodename47]

Originally Posted by mit_peid

How can one tell if it is set up in the ROM correctly?

Ask your tuner.

[lxsedan]

anyway to get the layout to fit a phone easily. Looks like it was laid out for tablet and when loaded on phone its much too big and doesn't fit screen.

[TheVelourFog]

Are there any oil pressure sensors that can be used with Torque or do oil pressure sensors only hook up to physical gauges?

[codesplice]

Originally Posted by lxsedan

anyway to get the layout to fit a phone easily. Looks like it was laid out for tablet and when loaded on phone its much too big and doesn't fit screen.

Which layout are you talking about - the general Realtime Gauge display? It should automatically scale to fit your screen. The layout looks the same on all my Android devices, from the 3.7" display on a Nexus One to the 7" display on a Nexus 7, just scaled larger or smaller to make things fit.

[codesplice]

Originally Posted by TheVelourFog

Are there any oil pressure sensors that can be used with Torque or do oil pressure sensors only hook up to physical gauges?

Not that I know of. The sensor would have to integrate with the rest of the OBD bus in the car, which isn't really going to happen unless it's something the system is already configured for. I think you're stuck with a physical gauge for anything practical.

Though it would be pretty awesome if someone could pull that off!

[ck-GT86]

Originally Posted by Synack

I hope this gets updated in the OP because every time I wipe my phone or get a new phone I have to constantly re-figure out how to enable Fahrenheit in Torque for Oil Temperature.

Here is the real equation for the Oil Temp PID in Torque.
((AC-40)*1.8)+32

After that, go to Unit settings and enable Fahrenheit (or disable Celcius, whichever it is).

I tried it last night and I was hovering around 210-225 degrees on my turbo kit with casual driving. (no cooling mods)

Please please please add this to the original post in this thread so nobody has to dig and search deep for days just to convert to Fahrenheit like I did.

Quick update, I tried this formula and the readings were off since I read my temps in F. Removed everything besides "AC-40" and all worked once the car was turned on. Also set the last parameter to "auto"

.ck