Better Mic to replace OEM Mic in BRZ / FRS ???

[dssence]

Originally Posted by industrial

I was just thinking about this today. I think I might take apart the mic housing and see if there is something I can do. I'm hoping maybe I can add some rubber/nylon washers and some closed cell foam to help isolate the mic better. Maybe it's just bolted to noisy panel and the mic is picking up alot of vibrations? Don't know yet.

Hi I'm trying to make the FRS stereo work on my Toyota 86 but I need one from an FRS dissasembled. Would you mind opening yours and taking some pics of the inside ?

see what I posted before to luan87us


Hey Listen I have a toyota 86 and wanted to switch to the FRS stereo. Problem is I bluetooth doesn't work unless it detects a mic. so I bought a microphone en electret microphone. But I think this requires more electronics can you help me out ?
I also bought this

http://www.aliexpress.com/store/prod...966377353.html

which is some sort of mic for surveyllance cameras., it's got inside an LM386 OpAMP but it's not working, has three wires red,black ,white .
Red I suppose was power .. from the specs on aliexpress says it requires 9- to +12vcd, then black GND, and white suppose was mic input.

so I tried wiring it this way.

MACC ---> supplies +5 vdc so useless

MIN+ --> tried first MIN+ to white did nothing
MIN- ---> tried then MIN- did nothing I also tried both

SGND --> signal ground --> wired to BLACK

sO no ideas.. if you can help would be great!