ecutek issue. no response from obd?

[JOSEC]

I'have the same thing. I checked my car for DTC using the ECUTEK software. And I get the same error for the "TCM" check. I'm running Delicious Stage 2 NA and have spoken to Bill about it. He said he's bugging ECUTEK about it.

[steve99]

if everything else is ok and its just reading obd codes that is problem then try using a cheap obd scan tool elm327 or similar to read codes.

if scantool works then the software bug is in ecutek software on the laptop if the scantool wont read codes then the bug is in the rom code flashed to your car not responding to obd requests.

alternativly see if your ecutek cable and software will read obd codes from another brz or frs without an ecutek tune flashed or it should probably read obd codes from any vehicle less than 5 years old as they are standard requests.

[Shit Luck]

Originally Posted by HI

I get the same thing. My screen look like that one.

Originally Posted by JOSEC

I'have the same thing. I checked my car for DTC using the ECUTEK software. And I get the same error for the "TCM" check. I'm running Delicious Stage 2 NA and have spoken to Bill about it. He said he's bugging ECUTEK about it.

Do you guys have launch control issues? Mine is non existent. Also having idle issues.
What revision number is your tune?

[DJCarbine]

I always get the "No response to ODB request" on the AT TCM, I doubt you will get a response from that unless you have an automatic

[Shit Luck]

Originally Posted by DJCarbine

I always get the "No response to ODB request" on the AT TCM, I doubt you will get a response from that unless you have an automatic

Yeah I screen shot the wrong one... lol
More importantly I am showing not dtc codes but the car doesn't want to idle or warm start.

[JOSEC]

Originally Posted by Shit Luck

Do you guys have launch control issues? Mine is non existent. Also having idle issues.
What revision number is your tune?

I still have launch control and my idle is fine. As for revision, I have the most current one. But I'm having the same issue where codes aren't showing using ECUTEK but shows up on a $10 Bluetooth OBD code reader. I've been having code P0507 for while. Bill asked me to check the EVAP lines under the intake manifold. I've clamped all the EVAP lines.

[DeliciousTuning]

Originally Posted by Shit Luck

Yeah I screen shot the wrong one... lol
More importantly I am showing not dtc codes but the car doesn't want to idle or warm start.

Yeah the DTC's not showing is odd. I have been speaking to EcuTeK about that to see what might be causing this.

As for the idle being poor, and no launch control, which tune did you flash into the car. Is it one of our Delicious Tuning tunes or another tuners, please email if so. Sorry I have an incredibly hard time linking username to customers so bear with me.

Cheers,
William Knose
Delicious Tuning

[Shit Luck]

Originally Posted by DeliciousTuning

Yeah the DTC's not showing is odd. I have been speaking to EcuTeK about that to see what might be causing this.

As for the idle being poor, and no launch control, which tune did you flash into the car. Is it one of our Delicious Tuning tunes or another tuners, please email if so. Sorry I have an incredibly hard time linking username to customers so bear with me.

Cheers,
William Knose
Delicious Tuning

I did email you about a week or two ago. Its your tune as that's the only tune I have. Its the flash and go tune.
My name is Keith Keller

[Shit Luck]

Still no response to my emails or resolution to my warm start and idle issues....
Parking the car till spring at this point when I can get a real tune...