check valve behind pcv - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

AZbrz89 · 01-09-2015, 01:38 AM

After reading the specs on rhe radium dual catch cans the kit comes with a check valve. Hmmm thanks for the pics earlier

Rosticles · 01-09-2015, 10:26 AM

Where does it say it has a check valve? On the website it refers to the operation of the PCV valve, but that won't cut it for forced induction.

CK_Bladesmith · 01-09-2015, 10:28 AM

My radium catch cans did not come with any kind of check valves. I ordered from @FT-86 SpeedFactory

AZbrz89 · 01-09-2015, 10:41 AM

Quote:

Originally Posted by CK_Bladesmith

My radium catch cans did not come with any kind of check valves. I ordered from @ft86speedfactory

Oh ok

Quote:

Originally Posted by Rosticles

Where does it say it has a check valve? On the website it refers to the operation of the PCV valve, but that won't cut it for forced induction.

You're right! Thought it was the same thing just different terminology lol

Fizz · 01-10-2015, 08:14 AM

Quote:

Originally Posted by alexand3r

I have a Saikou Michi set, which has a 3/8" connection for the PCV line and a 1/2" that goes to the manifold (which is also takes 1/2" ID).

Which saikou michi catch can did you get? The universal or the FRS specific one? Do you know what's the difference between those two types?

alexand3r · 01-10-2015, 03:02 PM

Quote:

Originally Posted by Fizz

Which saikou michi catch can did you get? The universal or the FRS specific one? Do you know what's the difference between those two types?

I got the FRS/BRZ specific.

The differences are that the cans come with mounting hardware to attach to the strut bar and the inlet and outlet on the cans are rotated to work without serious bends in the hoses.

Also, the inlet is 3/8" and the outlet is 1/2" on the PCV can in order to correctly match our setup.

DHitHim · 09-07-2016, 06:15 PM

Quote:

Originally Posted by AZbrz89

It says on radium website 1/2" pcv hose

boomba here I come lol

Did you ever get the boomba installed with the radium kit? Did you leave the factory PCV on the block?

01-09-2015, 10:28 AM	#59
CK_Bladesmith Senior Member Join Date: Feb 2013 Drives: Raven FR-S Location: Victoria TX Posts: 335 Thanks: 372 Thanked 95 Times in 75 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	check valve behind pcv My radium catch cans did not come with any kind of check valves. I ordered from @FT-86 SpeedFactory __________________ Raven FR-S mods: Unichip, Ground Control street coilovers with camber plates and strut tower brace, SPC Lca's, Drag DR-38 wheels with Dunlop Direzza DZ101s, Perrin CAI and silicone inlet tube, Perrin 3" resonated catback, Perrin high flow catted front pipe, Rev Works UEL header. Last edited by CK_Bladesmith; 01-09-2015 at 11:39 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PCV valve leaking?	jamesm	Forced Induction	24	12-25-2014 07:38 PM
Fumoto valve in the winter?	Muskokan	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	19	02-25-2014 01:06 PM
Exhaust Cut Off Valve	beagoodruslan	Engine, Exhaust, Transmission	2	01-01-2014 02:47 AM
FS: Synchronic Diverter Valve Kit	FReSh_86	Engine, Exhaust, Bolt-Ons	0	11-26-2013 03:21 PM
Name that valve cover!!!! FA20????	ESBjiujitsu	Engine, Exhaust, Transmission	3	06-05-2012 10:42 PM

01-09-2015, 01:38 AM	#57
AZbrz89 Senior Member Join Date: Dec 2014 Drives: 14 BRZ Crystal Black Silica Limited Location: Tucson AZ Posts: 190 Thanks: 23 Thanked 19 Times in 18 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	After reading the specs on rhe radium dual catch cans the kit comes with a check valve. Hmmm thanks for the pics earlier

User Name		Remember Me?
Password