BRZ headlight swap to Monogram Series *UPDATE:10/12/14 w/ Pics*

[Andrew025]

What are you planning on doing for turn signals?

Edit: wait never mind, you're going the other way. Thought you had a BRZ.

[Bach415]

Originally Posted by JDis3

Refining shouldn't be an issue if I could get ahold of both wiring diagrams


Sent from my iPad using Tapatalk

Or you can just do repin n test. That's what I did. The BRZ headlight wiring diagram is on the site. Look up BRZ headlights on FRS on the forum and you should be able to find it. The Monogram series headlights pins are similar to the GT86 pins if it is 8 pin. If it's 6, then its testing time. I can't tell you for sure which pins goes where as I just tested it constantly on mine(I converted my 6pin halogen headlight into the 8 pin BRZ headlight).

Edit: Just notice that you are in NorCal. If you are near SF/DC area I can help you out w/ repinning if needed.

[JDis3]

this is what i ended up finding.

[Bach415]

Originally Posted by JDis3

this is what i ended up finding.

Yup. That is it for the wiring diagram.

[JDis3]

bump. does anyone know if the monogram wiring is identical to the gt86?

[PhoKingCool]

suscribing

[2SeeKU]

Originally Posted by JDis3

bump. does anyone know if the monogram wiring is identical to the gt86?

The wiring in the GT spec is different to that of the monogram/GTS, with a 6 pin connector instead of an 8 pin. That diagram is actually what l made to do the headlight conversion in my car.


If you get stuck, l think l have the wiring diagram for the Monogram/GTS I can upload tonight.

[JDis3]

Originally Posted by 2SeeKU

The wiring in the GT spec is different to that of the monogram/GTS, with a 6 pin connector instead of an 8 pin. That diagram is actually what l made to do the headlight conversion in my car.





If you get stuck, l think l have the wiring diagram for the Monogram/GTS I can upload tonight.

Yes that would be great if you could upload the monogram wiring diagram.

[JDis3]

Bump. Can someone please post the 8pin monogram or 10 series wiring diagram. I'm ready to install my Brz headlights already

[Bach415]

Originally Posted by JDis3

Bump. Can someone please post the 8pin monogram or 10 series wiring diagram. I'm ready to install my Brz headlights already

Have you tried just plugging it in first and see if it works? I don't think anyone has a monogram/10 series wiring diagram. More like the JDM diagram/BRZ diagrams that was posted for you a while back. Your best bet is to label them like I did when I did the repinning and just trial and error. If anything, it should just be only a few pins to repin if I'm correct.

[JDis3]

Originally Posted by Bach415

Have you tried just plugging it in first and see if it works? I don't think anyone has a monogram/10 series wiring diagram. More like the JDM diagram/BRZ diagrams that was posted for you a while back. Your best bet is to label them like I did when I did the repinning and just trial and error. If anything, it should just be only a few pins to repin if I'm correct.

Honestly I'm a bit spoiled from the is300 forums having pretty much every question answered through the search button. I'm not fond of trial error because of my lack of free time. If no one ends up responding, maybe ill take a day to dedicate to the headlights

[Bach415]

Originally Posted by JDis3

Honestly I'm a bit spoiled from the is300 forums having pretty much every question answered through the search button. I'm not fond of trial error because of my lack of free time. If no one ends up responding, maybe ill take a day to dedicate to the headlights

Well you do have an older generation IS300 which means more information for that car is out there compared to the FRS/BRZ/86. People had more time to experiment with that car than ours. Also, it seems like most people here with a FRS likes the JDM headlights on the car rather than BRZ headlights so there will be little information about it. It's rare to see a 10 series/monogram series owner who wants to swap their headlights for BRZ ones. Anyways, I'll see if I can check out the monogram headlight wiring first on one of the cars at the meet today then see how I can help you repin it.

[JDis3]

Originally Posted by Bach415

Well you do have an older generation IS300 which means more information for that car is out there compared to the FRS/BRZ/86. People had more time to experiment with that car than ours. Also, it seems like most people here with a FRS likes the JDM headlights on the car rather than BRZ headlights so there will be little information about it. It's rare to see a 10 series/monogram series owner who wants to swap their headlights for BRZ ones. Anyways, I'll see if I can check out the monogram headlight wiring first on one of the cars at the meet today then see how I can help you repin it.

That'd be great thanks. I guess the Jdm factor is no longer the most important factor for me anymore haha. Before for me if it was Jdm it must be better. I like the monogram/jdm headlights but imo they don't look as good as the Brz headlights.

[JDis3]

Figured out the wiring, will upload pictures when i get around to installing the lights.