TapFlasher Problems: Turn Signals Stay Lit, Side Markers Don't Blink - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

bobsacamenoh · 09-28-2014, 04:16 PM

I finally replaced the flasher that came with the Tom's tail lights US Spec and installed the TapFlasher and the delayed blink is now gone, which is great, but the problems I am having now are:

1. When I use the key remote to lock the car (or unlock), the front and rear turn signals stay on longer than I want them to. About a min and a half.

2. The side markers don't blink.

Any ideas for a fix?

Thanks

Poodles · 09-28-2014, 11:48 PM

1) This is a feature on the Tapturn, don't know how the time is adjusted though (if you can)
2) They don't blink from the factory, you have to rewire for that.

bobsacamenoh · 09-29-2014, 02:17 AM

Quote:

Originally Posted by Poodles

1) This is a feature on the Tapturn, don't know how the time is adjusted though (if you can)
2) They don't blink from the factory, you have to rewire for that.

Thanks for the reply. Lol, I guess I never really noticed regarding the side markers. Was just thinking it was pouring when I saw a little rain.

PhreshhWun · 10-11-2014, 03:34 AM

You should have gotten a set of instruction sheets outlining how to change the settings, I can take screenshots and post it if needed

Sent from my iPhone using Tapatalk

scottmcphee · 10-13-2014, 11:17 AM

Quote:

Originally Posted by bobsacamenoh

Thanks for the reply. Lol, I guess I never really noticed regarding the side markers. Was just thinking it was pouring when I saw a little rain.

You can adjust the Arrival & Departure Lighting time. Check page 2 of manual.

You can access the manual directly online here.

Cheers!
Scott

09-28-2014, 04:16 PM	#1
bobsacamenoh Senior Member Join Date: Apr 2014 Drives: 2014 Scion FRS Location: US Posts: 148 Thanks: 52 Thanked 68 Times in 22 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	TapFlasher Problems: Turn Signals Stay Lit, Side Markers Don't Blink I finally replaced the flasher that came with the Tom's tail lights US Spec and installed the TapFlasher and the delayed blink is now gone, which is great, but the problems I am having now are: 1. When I use the key remote to lock the car (or unlock), the front and rear turn signals stay on longer than I want them to. About a min and a half. 2. The side markers don't blink. Any ideas for a fix? Thanks Last edited by bobsacamenoh; 09-28-2014 at 05:24 PM.

10-11-2014, 03:34 AM	#4
PhreshhWun Senior Member Join Date: Mar 2013 Drives: 2013 Subaru Brz Sport-Tech SWP Location: Scarborough, Ontario Posts: 159 Thanks: 24 Thanked 25 Times in 24 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	You should have gotten a set of instruction sheets outlining how to change the settings, I can take screenshots and post it if needed Sent from my iPhone using Tapatalk __________________ Mods: 2013 Subaru Outback fog lights, HID fog lights, LED vanity lights, LED dome light, LED trunk light, LED license plate lights, LED door courtesy lights, LED side markers, HID headlights, J2 Engineering test pipe, HKS Drop-In air filter, Window Visors, De-badged, and Diode Dynamics LED side mirrors Side Chick: 93' 240sx Convertible

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vicious LED-LED Bulbs Thead - Turn Signals / DRLs / Reverse / Markers / LP / Trunk	Vicious LED	Exterior Parts - Lighting	145	05-26-2014 04:41 PM
how to make FR-S front turn signals stay off when not in use	Pavel	Cosmetic Modification (Interior/Exterior/Lighting)	15	10-07-2013 07:29 PM
Is it possible to link the turn signal blink to the side marker on the BRZ?	tracerit	Cosmetic Modification (Interior/Exterior/Lighting)	1	03-09-2013 03:03 PM
How to: Fixing hyper blink on LED turn signals	Laika	Cosmetic Modification (Interior/Exterior/Lighting)	0	01-20-2013 07:58 PM

09-28-2014, 11:48 PM	#2
Poodles Senior Member Join Date: Oct 2013 Drives: 2015 Series.Blue Location: Fort Worth, TX Posts: 1,781 Thanks: 88 Thanked 781 Times in 481 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	1) This is a feature on the Tapturn, don't know how the time is adjusted though (if you can) 2) They don't blink from the factory, you have to rewire for that.

User Name		Remember Me?
Password