TapFlasher Problems: Turn Signals Stay Lit, Side Markers Don't Blink
 

I finally replaced the flasher that came with the Tom's tail lights US Spec and installed the TapFlasher and the delayed blink is now gone, which is great, but the problems I am having now are:

1. When I use the key remote to lock the car (or unlock), the front and rear turn signals stay on longer than I want them to. About a min and a half.

2. The side markers don't blink.

Any ideas for a fix?

Thanks

1) This is a feature on the Tapturn, don't know how the time is adjusted though (if you can)
2) They don't blink from the factory, you have to rewire for that.

Thanks for the reply. Lol, I guess I never really noticed regarding the side markers. Was just thinking it was pouring when I saw a little rain.

You should have gotten a set of instruction sheets outlining how to change the settings, I can take screenshots and post it if needed


Sent from my iPhone using Tapatalk

You can adjust the Arrival & Departure Lighting time. Check page 2 of manual.

You can access the manual directly online here.

Cheers!
Scott