OpenFlash Tablet: v1.60 OTS Maps (beta)-- USDM testers wanted - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Walla Walla · 06-28-2014, 04:01 PM

ha you revised maps stage 2 uel with bpb ? if so I can test on 91 octane !

calmtigers · 06-28-2014, 08:16 PM

Quote:

Originally Posted by wparsons

1.6b works with 700C, flashed this morning.

Have you got the chance to drive around and get a feel of what is different / changed?

Tromatic · 06-28-2014, 09:30 PM

Quote:

Originally Posted by phobos512

What you're asking about has nothing to do with the OFT beta test ROMs my friend. Best not to clutter this thread further.

LOL. Small so as not to clutter.

Tromatic · 06-28-2014, 09:30 PM

Thanks to Shiv for the hard work he does.

Jrdad · 06-28-2014, 10:13 PM

Just got my OFT this morning and am up for trying the beta!

solidONE · 06-28-2014, 10:18 PM

It seems the cam timing has been changed to reduce 'induction noise'. I'm assuming it's the vibration sound when the cams are fully advanced at the mid low range. I don't know about you guys, but if this means that there is a penalty in power output and no benefit besides noise reduction at that range... I no likey.

Andrew025 · 06-28-2014, 10:24 PM

Quote:

Originally Posted by solidONE

It seems the cam timing has been changed to reduce 'induction noise'. I'm assuming it's the vibration sound when the cams are fully advanced at the mid low range. I don't know about you guys, but if this means that there is a penalty in power output and no benefit besides noise reduction at that range... I no likey.

I'm going to assume it doesn't since Shiv posted earlier the 1.6 made 5-6whp more than the 1.59 stage 1 maps.

solidONE · 06-28-2014, 10:34 PM

Quote:

Originally Posted by Andrew025

I'm going to assume it doesn't since Shiv posted earlier the 1.6 made 5-6whp more than the 1.59 stage 1 maps.

I must have missed that comment.

Tromatic · 06-28-2014, 11:10 PM

Quote:

Originally Posted by Andrew025

I'm going to assume it doesn't since Shiv posted earlier the 1.6 made 5-6whp more than the 1.59 stage 1 maps.

That's an impressive gain.

Shiv@Openflash · 06-28-2014, 11:47 PM

Quote:

Originally Posted by solidONE

So I just reflashed the STG 1, 1.60 beta map and took a log. Didn't notice any reduction in induction noise. Still kicks in at around 4000rpm with the noise and all. I did notice that the fuel correction is much less than some of the previous revisions. Also had the IAM get dialed back by .02 while wide open on my last pull. Never seen that happen before. Might be an anomaly...

You should read the email I sent you carefully.

solidONE · 06-29-2014, 12:01 AM

Quote:

Originally Posted by shiv@vishnu

You should read the email I sent you carefully.

Oops... Sorry. Got a little too excited. Post deleted.

Shiv@Openflash · 06-29-2014, 12:42 AM

Quote:

Originally Posted by solidONE

Oops... Sorry. Got a little too excited. Post deleted.

it's cool

Lytheum · 06-29-2014, 01:21 AM

Quote:

Originally Posted by wparsons

1.6b works with 700C, flashed this morning.

Woohoo! Hurry up and drive a lot guys! I need me an update.

troek · 06-29-2014, 06:15 AM

can i have this map by july 20th? me and some friends have a friendly race going down at tsukuba.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFlash Tablet v1.42b maps now available	Shiv@Openflash	Software Tuning	159	09-13-2016 01:29 AM
Openflash Tablet v1.31 beta maps (including Stage 2!) now available for download	Shiv@Openflash	Software Tuning	354	02-08-2015 06:23 PM
OpenFlash Tablet E85 (and gasoline) Maps now available	Shiv@Openflash	Software Tuning	401	08-14-2014 12:14 AM
Now Available: OpenFlash Tablet Datalogging/Datagraphing (BETA Release)	Shiv@Openflash	Software Tuning	255	02-15-2014 05:43 AM
OpenFlash Tablet: USDM Stage 2 EL/UEL testers needed	Shiv@Openflash	Software Tuning	13	01-05-2014 01:42 AM

06-28-2014, 09:30 PM	#46
Tromatic Banned Join Date: May 2013 Drives: FR-S Location: Portland, OR Posts: 2,232 Thanks: 61 Thanked 1,728 Times in 786 Posts Mentioned: 19 Post(s) Tagged: 0 Thread(s)	Thanks to Shiv for the hard work he does.

06-28-2014, 10:18 PM	#48
solidONE Senior Member Join Date: Dec 2012 Drives: FR-S Whiteout Location: California Posts: 2,863 Thanks: 1,808 Thanked 791 Times in 611 Posts Mentioned: 42 Post(s) Tagged: 0 Thread(s)	It seems the cam timing has been changed to reduce 'induction noise'. I'm assuming it's the vibration sound when the cams are fully advanced at the mid low range. I don't know about you guys, but if this means that there is a penalty in power output and no benefit besides noise reduction at that range... I no likey.

User Name		Remember Me?
Password