Kraftwerks Supercharger Owners Thread

[SPCorBUST]

Originally Posted by Calum

My ring finger is a size 14.5... My hands barely fit in the engine bay, let alone between the runner of the intake manifold.

You don't put your fingers in there. your fingers stay on top of the manifold.

Sent from my SGH-M919 using Tapatalk

[Taino-BRZ]

Does anyone knows the calibration for the denso 078900 5410 map sensor that came with the kraftwerks kit? We are trying to tune and can't find it anywhere is for Hondas..

Sent from my SGH-M919 using Tapatalk

[Taino-BRZ]

this one

Sent from my SGH-M919 using Tapatalk

[King Tut]

Originally Posted by Taino-BRZ

Does anyone knows the calibration for the denso 078900 5410 map sensor that came with the kraftwerks kit? We are trying to tune and can't find it anywhere is for Hondas..

@nelsmar and @jamesm

[FR-S Matt]

I got an OMNI 3-Bar map sensor just the other day. I have no idea what it would be.

[zERoTu]

Originally Posted by SPCorBUST

Still don't know why everyone had a hard time with those. Just loop a zip tie around a line, push it to the back and tighten it down. You can use the hole between headers to pull the loop tight. I'm at 15psi I never had a blowout, makes no sense to go through all this trouble for the same outcome.

Sent from my SGH-M919 using Tapatalk

which hoses are u referring to? i only did the ones under the intake manifold.

[ST-A]

Originally Posted by zoth

Sounds like you have the smooth pulley's?

no i have the toothed pulleys on.

does anybody know if the stock MAP sensor can also be rescaled so it can read about 1bar/15psi? stock it seems it can read up to 0.4bar

[FR-S Matt]

Originally Posted by ST-A

no i have the toothed pulleys on.

does anybody know if the stock MAP sensor can also be rescaled so it can read about 1bar/15psi? stock it seems it can read up to 0.4bar

Doubtful. Everyone I know that has boosted has changed sensors due to the stock one being for N/A.

[KraftWerks]

Originally Posted by Taino-BRZ

Does anyone knows the calibration for the denso 078900 5410 map sensor that came with the kraftwerks kit? We are trying to tune and can't find it anywhere is for Hondas..

Sent from my SGH-M919 using Tapatalk

Here you go @Taino-BRZ!

Pressure offset is -.045
Voltage is .367

[SPCorBUST]

Originally Posted by zERoTu

which hoses are u referring to? i only did the ones under the intake manifold.

Those are the ones I was referring to

[Taino-BRZ]

I want to point out the great customer service from @KraftWerks and @DeliciousTuning always a fast answer whenever you need something. Keep it up guys. I just received my cogged pulleys btw.

Sent from my SGH-M919 using Tapatalk

[KraftWerks]

Thanks for the kind words @Taino-BRZ

We've got a few (6-7 depending on how many orders came in today) complete oil-cooler kits available right now. Contact us if you are in need of one. They retail for $579.99, you guys will get a discount of course.

[zoth]

Originally Posted by KraftWerks

Thanks for the kind words @Taino-BRZ

We've got a few (6-7 depending on how many orders came in today) complete oil-cooler kits available right now. Contact us if you are in need of one. They retail for $579.99, you guys will get a discount of course.

Can you give us a preview of the install/install manual?

[Freeman]

Originally Posted by KraftWerks

Thanks for the kind words @Taino-BRZ

We've got a few (6-7 depending on how many orders came in today) complete oil-cooler kits available right now. Contact us if you are in need of one. They retail for $579.99, you guys will get a discount of course.

15% off with proof of supercharger purchase right?