Checking your Direct Injector numbers - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ft86me · 03-01-2014, 01:01 AM

Hey everyone! Here is a little trick to see the number of the direct injector seals you have on your car. This is useful if you are going to replace them and want to order them before taking everything apart.

Below is the general area you will be looking in. This is right behind the AC compressor and down below the manifold. notice where the white light from my stinger is shining on the head of the bolt below the manifold

Name: ImageUploadedByTapatalk1393653444.177861.jpg
Views: 3833
Size: 263.8 KB

Name: ImageUploadedByTapatalk1393653444.177861.jpg
Views: 3833
Size: 263.8 KB

Below is a closer look of where you are looking. Sorry for the crap and blurry pic but this is zoomed in some more. to the left under the manifold you will see the top of bolt there.directly behind that is the actual injector. which you will see in the next pic.

Name: ImageUploadedByTapatalk1393653525.093685.jpg
Views: 2738
Size: 266.8 KB

Name: ImageUploadedByTapatalk1393653525.093685.jpg
Views: 2738
Size: 266.8 KB

Below is the zoom of the straight shot down right behind the bolt i was talking about in the previous pic. you can see the number and you can see the connector going into it.
Name: ImageUploadedByTapatalk1393653603.310936.jpg
Views: 2668
Size: 194.1 KB

Name: ImageUploadedByTapatalk1393653603.310936.jpg
Views: 2668
Size: 194.1 KB

Hope this helps!

Sent from my iPhone using Tapatalk

suaveflooder · 03-01-2014, 01:05 AM

Great trick! Used it a couple months ago. I'm a 2

ft86me · 03-01-2014, 01:08 AM

Quote:

Originally Posted by suaveflooder

Great trick! Used it a couple months ago. I'm a 2

thanks man! i was talking to @nelsmar on the phone while doing this and he was like whoa you should post this haha.

suaveflooder · 03-01-2014, 01:09 AM

Quote:

Originally Posted by ft86me

thanks man! i was talking to @nelsmar on the phone while doing this and he was like whoa you should post this haha.

It's a good post. Most people don't know you can see it without removing a thing

ft86me · 03-01-2014, 01:10 AM

Quote:

Originally Posted by suaveflooder

It's a good post. Most people don't know you can see it without removing a thing

thanks man! hope i'm not stepping on toes if people found this out before.

AdrianG · 03-01-2014, 06:17 AM

Brilliant, thanks!

- AdrianG

garfull · 05-03-2014, 10:47 PM

just trying to educate myself. why would the numbers be different from one car to the next? isn't it 1 seal per injector? thx for the post.

Quote:

Originally Posted by ft86me

Hey everyone! Here is a little trick to see the number of the direct injector seals you have on your car. This is useful if you are going to replace them and want to order them before taking everything apart.

Below is the general area you will be looking in. This is right behind the AC compressor and down below the manifold. notice where the white light from my stinger is shining on the head of the bolt below the manifold

Attachment 68818

Below is a closer look of where you are looking. Sorry for the crap and blurry pic but this is zoomed in some more. to the left under the manifold you will see the top of bolt there.directly behind that is the actual injector. which you will see in the next pic.

Attachment 68819

Below is the zoom of the straight shot down right behind the bolt i was talking about in the previous pic. you can see the number and you can see the connector going into it.
Attachment 68820

Hope this helps!

Sent from my iPhone using Tapatalk

ft86me · 05-04-2014, 03:52 AM

Quote:

Originally Posted by garfull

just trying to educate myself. why would the numbers be different from one car to the next? isn't it 1 seal per injector? thx for the post.

It has to do with the angles they spray into the cylinders. Each number that is labeled on it sprays differently so you need the same set that came w yours and all need to be the same. As for the fuel injectors, you don't need to worry about any of that. Hope this helps !

Sent from my iPhone using Tapatalk

marcoaferrer · 05-13-2014, 10:10 AM

someone show this to @Dezoris

Dezoris · 05-13-2014, 11:28 AM

Quote:

Originally Posted by marcoaferrer

someone show this to @Dezoris

The direct injector thread had this updated. Its very good you can sneak a peak and see the numbers. I hope overtime as corrosion sets in and dirt builds up that these numbers don't disappear.

ft86me · 05-13-2014, 11:53 AM

Quote:

Originally Posted by Dezoris

The direct injector thread had this updated. Its very good you can sneak a peak and see the numbers. I hope overtime as corrosion sets in and dirt builds up that these numbers don't disappear.

Thanks for helping me w the parts and info for getting my seals changed. Car is running great and now at 12psi!

Sent from my iPhone using Tapatalk

Dezoris · 05-13-2014, 11:55 AM

Quote:

Originally Posted by ft86me

Thanks for helping me w the parts and info for getting my seals changed. Car is running great and now at 12psi!

Sent from my iPhone using Tapatalk

Great, no problem. Hopefully they stay healthy with no knock and detonations should be fine.

03-01-2014, 01:01 AM	#1
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s)	Checking your Direct Injector numbers Hey everyone! Here is a little trick to see the number of the direct injector seals you have on your car. This is useful if you are going to replace them and want to order them before taking everything apart. Below is the general area you will be looking in. This is right behind the AC compressor and down below the manifold. notice where the white light from my stinger is shining on the head of the bolt below the manifold Below is a closer look of where you are looking. Sorry for the crap and blurry pic but this is zoomed in some more. to the left under the manifold you will see the top of bolt there.directly behind that is the actual injector. which you will see in the next pic. Below is the zoom of the straight shot down right behind the bolt i was talking about in the previous pic. you can see the number and you can see the connector going into it. Hope this helps! Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Direct Injector Seal Installation \| Video and Issues	Dezoris	Engine, Exhaust, Transmission	234	03-07-2023 01:20 AM
Direct Injector Leaking	Carwhisperer	Issues \| Warranty \| Recalls / TSB	356	03-13-2020 12:35 PM
Direct Injector Failure Poll	track_warrior	Issues \| Warranty \| Recalls / TSB	553	01-12-2017 06:12 PM
Direct Injector's Leaking	Carwhisperer	Scion FR-S / Toyota 86 GT86 General Forum	1	05-11-2013 09:31 AM
Checking out your own car	Bu-Tang	Scion FR-S / Toyota 86 GT86 General Forum	18	06-11-2012 10:41 PM

03-01-2014, 01:05 AM	#2
suaveflooder Senior Member Join Date: Feb 2013 Drives: 2013 FR-S Location: San Diego Posts: 2,295 Thanks: 2,708 Thanked 1,052 Times in 664 Posts Mentioned: 29 Post(s)	Great trick! Used it a couple months ago. I'm a 2

03-01-2014, 06:17 AM	#6
AdrianG Generally Well Liked Join Date: Aug 2013 Drives: '08 STi Hatch, '11 Outback 3.6R Location: Ontario Posts: 419 Thanks: 43 Thanked 197 Times in 125 Posts Mentioned: 9 Post(s)	Brilliant, thanks! - AdrianG

05-13-2014, 10:10 AM	#9
marcoaferrer Senior Member Join Date: Jan 2014 Drives: Whiteout FR-S Location: Miami Posts: 251 Thanks: 97 Thanked 200 Times in 111 Posts Mentioned: 33 Post(s)	someone show this to @Dezoris

User Name		Remember Me?
Password