Full throttle Electric Supercharger Build Thread

[robwbright]

Another question...

I recall reading of a way to cut the charge time from 8x1 to 4x1.

What is that device, how much does it cost and is there a possibility of degrading the batteries (ie needing to replace them) by charging them faster.

[Urmyson]

Originally Posted by fenton

It is a noticeable difference. It just keeps pulling. Both Bu-tang and Rob noticed a difference in my car.

Shiv noticed a difference as well when he did his dual dump conversion.

Aww man, I just told my girlfriend that I wouldn't buy anymore car stuff for a while. I have a feeling she might be upset soon, but at least I will be able to drive away faster, lol.

[fenton]

Originally Posted by robwbright

I considered just going single dump pack and getting an OFH sooner... but I think I'll go 1.5.

Any thoughts on whether the gains are better/worse with 1.5 and no OFH vs. 1.0 and OFH?

For the price the 1.5 will get your more gains.

The OFH gets you awesome sound and a smoother curve.... I am just dying to get mine

[robwbright]

Originally Posted by Sojhinn

Loaded question. I would recommend both. I guess the person that would be best to answer this @nlowell when he gets the 1.5 pack or he and I can do a side by side drag race again. Since he has the ofh and I have the 1.5 pack currently.

I anticipate getting both... but it could be awhile after I drop 2k+/- on the ESC.

Saving remaining extra funds to take the kids to Disney this fall/winter.

[Sojhinn]

Originally Posted by robwbright

Another question...

I recall reading of a way to cut the charge time from 8x1 to 4x1.

What is that device, how much does it cost and is there a possibility of degrading the batteries (ie needing to replace them) by charging them faster.

The dual recharger is not out yet. But Fenton, shiv and maybe bu tang are testing this. I have only the single recharger and now that my batteries are almost completely broken in on the new packs it's hardly any difference from the single dump.

I would definitely get the dual recharger if I was tracking the car but not necessarily for street use.

[fenton]

Originally Posted by robwbright

Another question...

I recall reading of a way to cut the charge time from 8x1 to 4x1.

What is that device, how much does it cost and is there a possibility of degrading the batteries (ie needing to replace them) by charging them faster.

That is the aux charger. I am working with Rob to see when that might be available for release. Ill get back to you on that one. There is no possibility of degrading the batteries, it actually splits the load between the two controllers so it is actually easier on the system.

[Sojhinn]

Originally Posted by robwbright

I anticipate getting both... but it could be awhile after I drop 2k+/- on the ESC.



Saving remaining extra funds to take the kids to Disney this fall/winter.

Haha awesome. In headed to disneyworld ( I'm in San Diego but we enjoy heading to Florida too) this fall as well.

[Jac]

Originally Posted by raven1231

i

What is stock map ? Shiv's or the factory map?

Factory.

[robwbright]

Originally Posted by Sojhinn

Haha awesome. In headed to disneyworld ( I'm in San Diego but we enjoy heading to Florida too) this fall as well.

I went as a kid, but we've never been as a family... and the oldest is 10, youngest is 4. 'Bout time to go. I'll send you a pm with a couple questions about FL since I haven't been there in 30 years.

[Sojhinn]

Just realized how nuts it is when @fenton and I are on at the same time. Rapid fire answering!

[Sojhinn]

Quick question does anyone know if the torque app only measures manifold pressure or if it includes atmospheric pressure.

[robwbright]

Originally Posted by Sojhinn

Just realized how nuts it is when @fenton and I are on at the same time. Rapid fire answering!

And sometimes the same answer twice! LOL

[enwave]

Originally Posted by Sojhinn

Quick question does anyone know if the torque app only measures manifold pressure or if it includes atmospheric pressure.

I had heard it currently does not include atmospheric pressure -- but I'm not completely sure. I'd have to double check.


Sent from my iPhone using Tapatalk

[fenton]

Originally Posted by Sojhinn

Quick question does anyone know if the torque app only measures manifold pressure or if it includes atmospheric pressure.

It accounts for atmospheric. The OFT currently does not.

Sent from my HTC One using Tapatalk