Full throttle Electric Supercharger Build Thread - Page 302 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Shiv@Openflash · 04-11-2014, 05:48 PM

Quote:

Originally Posted by fenton

Oh wow you are LUCKY.

So is there a way to monitor the corrected value or just have to monitor absolute manifold pressure and subtract?

Thanks!

Right now, you will have to compare ambient and manifold pressure. But soon we will add another channel called "Boost" which will give you what you want.

Sojhinn · 04-11-2014, 05:57 PM

Quote:

Originally Posted by shiv@vishnu

Right now, you will have to compare ambient and manifold pressure. But soon we will add another channel called "Boost" which will give you what you want.

And my atmos pressure is 14.5 psi?!? Hmm something is wrong

fenton · 04-11-2014, 06:01 PM

Quote:

Originally Posted by Sojhinn

And my atmos pressure is 14.5 psi?!? Hmm something is wrong

Not necessarily. have you checked what the reading is on the OFT with your car in the ON position but not running.

Mine is 14.5 today too.... 100.2kpa

Sojhinn · 04-11-2014, 06:01 PM

Quote:

Originally Posted by fenton

Not necessarily. have you checked what the reading is on the OFT with your car in the ON position but not running.

Yeah it's the same. Weird.

Shiv@Openflash · 04-11-2014, 06:02 PM

Quote:

Originally Posted by Sojhinn

And my atmos pressure is 14.5 psi?!? Hmm something is wrong

Oops... i'm sorry. I meant to say that my manifold pressure with the engine not running is .24psi.

fenton · 04-11-2014, 06:07 PM

Quote:

Originally Posted by Sojhinn

Yeah it's the same. Weird.

Guess your atmospheric in san diego isn't very good.... looks like it is about 99kpa today

Sojhinn · 04-11-2014, 08:37 PM

Quote:

Originally Posted by fenton

Guess your atmospheric in san diego isn't very good.... looks like it is about 99kpa today

Just went back out checked manifold pressure without car on... .19 psi.

fenton · 04-11-2014, 08:43 PM

Quote:

Originally Posted by Sojhinn

Just went back out checked manifold pressure without car on... .19 psi.

So at 2500rpm you should hit about 3.9 or so maybe a bit more. You only have 1 dump right

Sent from my HTC One using Tapatalk

Sojhinn · 04-11-2014, 09:19 PM

Quote:

Originally Posted by fenton

So at 2500rpm you should hit about 3.9 or so maybe a bit more. You only have 1 dump right

Sent from my HTC One using Tapatalk

1 dump... for now.

. Im checking logs right now, but on Torque its about 3.7-3.8 psi.

On the log that I had the highest I got was a wee bit above 3 psi at 4200 rpm.

Sojhinn · 04-12-2014, 07:34 PM

Racing around with @nlowell right now

Sojhinn · 04-12-2014, 09:13 PM

Just finished. In a little bit @nlowell will be posting some side by side videos of our cars. Almost completely the same except for the headers. It was a lot of fun.

Jac · 04-12-2014, 09:36 PM

Question for existing owners. Whats the best way to get the wiring harness/foot switch into the drivers side footwell?

Sojhinn · 04-12-2014, 09:38 PM

I went through a gap right behind the ac controls. It's tight but you can do it.

fenton · 04-12-2014, 10:11 PM

Quote:

Originally Posted by Jac

Question for existing owners. Whats the best way to get the wiring harness/foot switch into the drivers side footwell?

I went down the drivers side of the engine bay and there is a slot that connects the hood and the door.... I just but it in there and ran to the foot well.

Sent from my HTC One using Tapatalk

04-12-2014, 07:34 PM	#4224
Sojhinn Lightning McQueen Driver Join Date: May 2012 Drives: Limited Red 6MT BRZ Location: San Diego Posts: 2,242 Thanks: 753 Thanked 1,167 Times in 644 Posts Mentioned: 77 Post(s) Tagged: 2 Thread(s)	Racing around with @nlowell right now __________________ Nicknamed Lightning by my Kids. Installed Mods: Phantom Electric Super Charger \| Open Flash Tune \| Perrin OP/ HFC Front pipe \| Invidia Q300 catback \| ST Suspension \| JDL Header \| Flex Fuel

04-12-2014, 09:13 PM	#4225
Sojhinn Lightning McQueen Driver Join Date: May 2012 Drives: Limited Red 6MT BRZ Location: San Diego Posts: 2,242 Thanks: 753 Thanked 1,167 Times in 644 Posts Mentioned: 77 Post(s) Tagged: 2 Thread(s)	Just finished. In a little bit @nlowell will be posting some side by side videos of our cars. Almost completely the same except for the headers. It was a lot of fun. __________________ Nicknamed Lightning by my Kids. Installed Mods: Phantom Electric Super Charger \| Open Flash Tune \| Perrin OP/ HFC Front pipe \| Invidia Q300 catback \| ST Suspension \| JDL Header \| Flex Fuel

04-12-2014, 09:38 PM	#4227
Sojhinn Lightning McQueen Driver Join Date: May 2012 Drives: Limited Red 6MT BRZ Location: San Diego Posts: 2,242 Thanks: 753 Thanked 1,167 Times in 644 Posts Mentioned: 77 Post(s) Tagged: 2 Thread(s)	I went through a gap right behind the ac controls. It's tight but you can do it. __________________ Nicknamed Lightning by my Kids. Installed Mods: Phantom Electric Super Charger \| Open Flash Tune \| Perrin OP/ HFC Front pipe \| Invidia Q300 catback \| ST Suspension \| JDL Header \| Flex Fuel

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Circuit Motorsports - Vortech Supercharger FR-S Build + Full Perrin Exhaust & Extras	Circuit Motorsports	Member's Car Journals	4	03-21-2013 05:45 PM
Subaru BRZ : Full Throttle, powerslide, hard revving & ride	ESBjiujitsu	BRZ Photos, Videos, Wallpapers, Gallery Forum	20	05-30-2012 07:43 PM
86 Full Throttle Video + another.	Aus86	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	2	04-02-2012 08:07 AM

04-12-2014, 09:36 PM	#4226
Jac Senior Member Join Date: Jun 2013 Drives: Fiat Abarth Location: Los Angeles, California Posts: 204 Thanks: 23 Thanked 96 Times in 45 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	Question for existing owners. Whats the best way to get the wiring harness/foot switch into the drivers side footwell?

User Name		Remember Me?
Password