Innovate (Sprintex) Supercharger Owners Topic

[Calum]

Originally Posted by wrxgoose

I'm going o be checking the alignment of the pulley on the nose of the blower soon, but I still think I'm gonna sell it. I really do love how she feels, but all these belts popping is getting expensive

Sent from my VS840 4G using Tapatalk

Have you checked the run out of the pulley yet? You wouldn't be the first I've read about with either the pulley or the hub having a run out issue.

[Ryan86]

Originally Posted by wrxgoose

I'm going o be checking the alignment of the pulley on the nose of the blower soon, but I still think I'm gonna sell it. I really do love how she feels, but all these belts popping is getting expensive

Sent from my VS840 4G using Tapatalk

I'd involve Innovate, your car ran perfect stock, so why since SC install? Confirm you running Innovate Pulley on the charger?
Have you fitted light weight pulleys by any chance?
Does not add up, I've had my kit and idler pulleys off more than 5 times, incl stock belt and shorter Blue Gates, with 80mm down to 70mm Sprintex and Raceseng pulleys, with no issue.
How's your oil in the charger, maybe a washer worn which could cause the pulley to vibrate under load. Just a thought.

[xjohnx]

What do we have here?

[Area86]

Originally Posted by xjohnx

What do we have here?

Nice. What flex fuel tune are you going to run? Moto East? Delicious?

Sent from Samsung Galaxy Note 3

[Ryan86]

Jealous, wish we had E85 in SA.

[xjohnx]

Originally Posted by Area86

Nice. What flex fuel tune are you going to run? Moto East? Delicious?

Sent from Samsung Galaxy Note 3

I have both Moto-East's and Delicious's flexfuel tunes, so I will eventually run them both and provide my thoughts (and possibly dynos) of the differences. I will be running the moto-east tune to start.. I need to get a map from Delicious that supports my wideband o2 via the secondary o2 input (as i really don't want to rewire that sensor every time i reflash to compare).

I have some parts coming in the mail on Tuesday so that I can build a harness to make swapping which sensor is connected to the rear o2 input much easier. So worst case scenario i will be able to run the delicious tune by wednesday for comparison sake.

[kylem1853]

does anyone know where I can buy the aftermarket intake pipe for the innovate kit and to people notice a difference in sound?

[evan]

Originally Posted by kylem1853

does anyone know where I can buy the aftermarket intake pipe for the innovate kit and to people notice a difference in sound?

What aftermarket intake pipe? Nobody makes one to sell in quantity AFAIK. Any muffler shop locally to you can probably fabricate an alum or SS pipe for you.

The SC whine does increase a bit. Not dramatically, but def noticeable.

[xjohnx]

Originally Posted by kylem1853

does anyone know where I can buy the aftermarket intake pipe for the innovate kit and to people notice a difference in sound?

Originally Posted by evan

What aftermarket intake pipe? Nobody makes one to sell in quantity AFAIK. Any muffler shop locally to you can probably fabricate an alum or SS pipe for you.

The SC whine does increase a bit. Not dramatically, but def noticeable.

Apparently adding the 3" perrin CAI in place of the stock airbox works and helps bring out the whine. @moto-mike may also be releasing a warm air style intake.

[DarrenDriven]

Hey guys, I am going to stop reading every post in this topic... if you would like me update the front page with any info then just tag me in a topic or PM me.

[DriftEm]

Originally Posted by xjohnx

Apparently adding the 3" perrin CAI in place of the stock airbox works and helps bring out the whine. @moto-mike may also be releasing a warm air style intake.

Yes it does

https://www.facebook.com/photo.php?v...type=2&theater

[xjohnx]

Originally Posted by DriftEm

Yes it does

https://www.facebook.com/photo.php?v...type=2&theater

content unavailable.

[DriftEm]

Originally Posted by xjohnx

content unavailable.

you gotta love facebook, here is another video, not as good but give you an idea

[ame="http://www.youtube.com/watch?v=CtxSeadsf8U&feature=share&list=UUlnf6oIAqZ COPqUGjnJSc5g&index=1"]supercharger_whine - YouTube[/ame]

[TOY 86]

Hey guys just finish installed my cusco supercharger did you guys ever encounter hard start when you installed your supercharger? Change my fuel injector to 700cc...