OpenFlash Tablet and Vortech Supercharger

[mad_sb]

Originally Posted by Luckrider

What parameters will the OFT have for the twins?

download the maps and the software yourself and look at a stock rom.

[Shiv@Openflash]

Originally Posted by mad_sb

Not to mention different flow rates at the same boost pressure depending on the compressor used in the particular kit, different maf placement from kit to kit (changes the airflow pattern around the maf), etc etc. Different size charge pipes, inter-cooler efficiency etc. Though mainly the flow rate and maf placement.

+1
Vortech engineers spent a lot of time with MAF sensor placement and housing diameter. They ended up locating it in an enlarged intercooler pipe with sufficient straight section before and after the MAF element. Required a patch harness extension but paid off in the end.

[LBC Por Siempre]

Originally Posted by wparsons

That's pretty awesome support!

That's the way it "should be". Especially when you show up at their Facility.

You can imagine what it's like when you're spending $15K-$20K on your GT3, and there is a line out the door. Figuratively of course.

[Luckrider]

Originally Posted by nelsmar

Your question does not make very much sense.

Originally Posted by mad_sb

download the maps and the software yourself and look at a stock rom.

I just realized I never quoted Shiv. I was talking about logging parameters since Shiv said it was tuned 100% logging with the OFT.

[Shiv@Openflash]

Originally Posted by cjsporl1996

Could you send me a pm with the pricing? I was going to buy from ft86speedfactory today.

Should have pricing by Monday or Tuesday. Just working out numbers now

[Shiv@Openflash]

Originally Posted by Luckrider

I just realized I never quoted Shiv. I was talking about logging parameters since Shiv said it was tuned 100% logging with the OFT.

Ah got it. Just the same 12 channels that are curreu available with OFT logging. The next update will give the user up to 50 channels to choose from.

[The Racers Line]

Someone let Shiv borrow their AVO/JDL turbo car so I don't have to buy the overpriced ecutek stuff. I can only dream...

[Luckrider]

Originally Posted by shiv@vishnu

Ah got it. Just the same 12 channels that are curreu available with OFT logging. The next update will give the user up to 50 channels to choose from.

You were effectively able to tune an FI kit with those parameters? Nice. I really can't wait for the extra ones to become available, and it is nice to see this platform as a whole progress.

[wparsons]

Originally Posted by LBC Por Siempre

That's the way it "should be". Especially when you show up at their Facility.

You can imagine what it's like when you're spending $15K-$20K on your GT3, and there is a line out the door. Figuratively of course.

I was asking about free OTS tunes, not custom paid tunes. Shiv's reply answered about free OTS tunes, which is what I was saying was awesome support.

[skye67]

Hi, my name is Eric and I'm a addicted to speed......

[sosick]

Originally Posted by nelsmar

Its a tad more complicated than that. You don't simply just tune X fuel supply for X rpm. Typically our cars are tuned with a maf sensor. And in the case of say a jackson racing supercharger if you remove the catalytic converters in the car the MAF sensor maxes out at 5.0v and cannot read the additional fuel at higher RPM. Thus alternate techniques are required.

How did ur engine go?

[MadFRS]

Originally Posted by sosick

How did ur engine go?

Check out this thread....

http://www.ft86club.com/forums/showthread.php?t=56141

[nelsmar]

Originally Posted by sosick

How did ur engine go?

Originally Posted by MadFRS

Check out this thread....

http://www.ft86club.com/forums/showthread.php?t=56141

As @MadFRS said... check the thread. Summary: Make sure your tuner is close, and someone you trust.

[cjsporl1996]

@shiv@vishnu What pulleys are you supporting shiv?