foot rest popping noise

[abutterman]

Originally Posted by fistpoint

What direction do you move your foot to make the noise? As far as I can tell, mine is fine. Serial is 20000+, January 2013 production.

the frs would move in any way you moved your foot. it was extremely loose and pushing the clips in and greasing them up did nothing. It was as if the holes were drilled incorrectly or something and the clips would just move around. if you pressed down on the top it would click then it would click again as it went back down and you could move it slightly to the right too and the carpet would shift with it. It was all kinds of messed up. My brz now though is as solid as can be

[m.wood0213]

Reviving a dead thread here. Anyone come up with a fix or a least way to take this piece off. I would also like to know if anyone using the wethertech floor mats experience this issue since the pics show to cover it up somewhat.

[mfbmike]

lol, mine does it as well. not worth the headache.

[krayzie]

I have a 2014 and same thing.

[m.wood0213]

Originally Posted by mfbmike

lol, mine does it as well. not worth the headache.

At the risk of setting on fire I drive the A/T so its the only place for my foot to rest. Ill probably try a few things later today and ill post if anything works.

[userjack6880]

Good thing I'm not the only one.

[m.wood0213]

UPDATE: Sprayed WD-40 in the upper clip hole and lower clip hole and the pops arent noticeable anymore.The plate still moves but I cant hear it. Idk how long it will last but only time will tell. Id still like to know if anyone using weather floor mats notice this issue or not.