OpenFlash Tablet: Enhanced Data Logging (Sneak Peek) - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

mitosis · 02-14-2014, 10:59 AM

Oh darn, I thought it had been two weeks already... came in to ask if there were any updates on the progress of this yet but nevermind, I guess I gotta keep being patient. Really looking forward to finally being to see my oil temp like I used to do with my ELM327/Torque App combo.

I'm really hoping that the logging duration will improve, I've never been able to log for more than an hour and that's gotten quite frustrating... there's no way this thing only has ~3MB of storage available for logs, right?

Grip Ronin · 02-14-2014, 12:38 PM

this is a great update. now i can check oil temp and knock without going thru techstream

dom · 02-16-2014, 11:15 PM

Would that be possible to change metrics to display in Celceus and KM/H instead of F & MPH?

solidONE · 02-16-2014, 11:21 PM

Brake preshuru rogging? Want!

mitosis · 02-20-2014, 05:38 PM

Quote:

Originally Posted by shiv@vishnu

It should be released within 2 weeks.

Any progress with this? Tomorrow will be 2 weeks. Not trying to rush you or anything, no worries if it's gonna be a while... I'm just super excited for this update so I'm hoping for at least some news on the progress of this to tide me over until it's actually released.

Shiv@Openflash · 02-20-2014, 05:40 PM

Quote:

Originally Posted by mitosis

Any progress with this? Tomorrow will be 2 weeks. Not trying to rush you or anything, no worries if it's gonna be a while... I'm just super excited for this update so I'm hoping for at least some news on the progress of this to tide me over until it's actually released.

It's coming along nicely. We are shooting for release by the end of next week

Darth Vaden · 02-20-2014, 08:27 PM

Looks great! Just ordered mine today, and looks like it was already shipped. Can't wait to get my hands on it!

Shiv@Openflash · 02-28-2014, 12:56 PM

Quick update:

We tried to get Enhanced Datalogging released in time for the weekend but ran out of time. Looks like early next week instead. But here's a list of the new datalogging channels that be added to the current list:

Advance Multiplier (for ALL ROM types)
A/F sensor #1 current (mA)
A/F sensor #1 voltage (V)
Accel pedal (%)
Ambient T (C)
Atmospheric press (kPa)
Coolant T (C)
Cylinder 1 misfire
Cylinder 2 misfire
Cylinder 3 misfire
Cylinder 4 misfire
Injection timing (°CA)
Oil Temp (C)
Equivalence RC (AFR)
Fuel press target (MPa)
Fuel pump duty (%)
Fuel rail press (MPa)
Fuel sytem status
Gear status
Injection mode
Injection time DF (mS)
Injection time PF (mS)
Injection volume (ml)
IAT (C)
Knock correction (°CA)
MAP (PSI)
MAF (g/s)
Req quantity highP FPD (ml)
Road speed (Km/h)
VVT exhaust AT (°FR)
VVT intake AT (°FR) )
VVT OCV duty 1 (%)
VVT OCV duty 2 (%)

There is still plenty of room to add more channels. But these are the ones that will be added with next week's update

Cheers
shiv

Victor Draken · 02-28-2014, 12:57 PM

Quote:

Originally Posted by shiv@vishnu

Quick update:

We tried to get Enhanced Datalogging released in time for the weekend but ran out of time. Looks like early next week instead. But here's a list of the new datalogging channels that be added to the current list:

A/F sensor #1 current (mA)
A/F sensor #1 voltage (V)
Accel pedal (%)
Ambient T (C)
Atmospheric press (kPa)
Coolant T (C)
Cylinder 1 misfire
Cylinder 2 misfire
Cylinder 3 misfire
Cylinder 4 misfire
Injection timing (°CA)
Oil Temp (C)
Equivalence RC (AFR)
Fuel press target (MPa)
Fuel pump duty (%)
Fuel rail press (MPa)
Fuel sytem status
Gear status
Injection mode
Injection time DF (mS)
Injection time PF (mS)
Injection volume (ml)
IAT (C)
Knock correction (°CA)
MAP (PSI)
MAF (g/s)
Req quantity highP FPD (ml)
Road speed (Km/h)
VVT exhaust AT (°FR)
VVT intake AT (°FR) )
VVT OCV duty 1 (%)
VVT OCV duty 2 (%)

There is still plenty of room to add more channels. But these are the ones that will be added with next week's update

Cheers
shiv

IAM for europe maps G series etc???

don't leave us alone

@shiv@vishnu

Shiv@Openflash · 02-28-2014, 12:59 PM

Quote:

Originally Posted by Victor Draken

IAM for europe maps G series etc???

don't leave us alone

@shiv@vishnu

Yes, that will be supported as well. For ALL ROM families.

jamesm · 02-28-2014, 01:01 PM

looks good. that should be enough to enable proper tuning of larger injectors.

s2d4 · 02-28-2014, 01:04 PM

fbkc and flkc?

Luckrider · 02-28-2014, 01:28 PM

I can't wait.

Hey @jamesm, when I can finally log these do you want to help me go a scale my MAF so we can see how much of a difference there is between the modified snorkel and filter compared to stock (because IIRC, Shiv rescaled based on the modded intake).

Shiv@Openflash · 02-28-2014, 01:33 PM

Quote:

Originally Posted by Luckrider

I can't wait.

Hey @jamesm, when I can finally log these do you want to help me go a scale my MAF so we can see how much of a difference there is between the modified snorkel and filter compared to stock (because IIRC, Shiv rescaled based on the modded intake).

There won't be any difference between the stock intake and one with with modified duct as far as MAF scaling requirements go.

02-14-2014, 12:38 PM	#16
Grip Ronin The Mechanic Join Date: Mar 2012 Drives: Civic Turbo,FR-S Location: NJ Posts: 928 Thanks: 130 Thanked 171 Times in 119 Posts Mentioned: 2 Post(s)	this is a great update. now i can check oil temp and knock without going thru techstream __________________ IG-Joey_Soul Progress Thread Ported billet 20G

02-20-2014, 08:27 PM	#21
Darth Vaden Junior Member Join Date: Jul 2013 Drives: 2013 Scion FR-S Location: Atlanta, GA Posts: 9 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s)	Looks great! Just ordered mine today, and looks like it was already shipped. Can't wait to get my hands on it! __________________ 2013 Firestorm 6MT - 277whp/235wtq - Tuned by DBW Motorsports on Ecutek - AVO Stage 1 Turbo Kit, Motiv Front/Overpipes, Perrin Resonated Catback, Perrin Exhaust Mounts, Bilstein B14 Coilovers, Whiteline Camber Bolts, Exterior LED/HID (6000k) Conversion, Switchback LED Front Turn Signals, 18x8" TSW Interlagos Silver, AEM Wideband O2, P3Cars Vent Gauge

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can you run ecutek data logging on a samsung windows tablet	Frs32907	Software Tuning	10	02-09-2016 10:30 PM
Part 1 of our FR-S / BRZ Turbo Kit Sneak Peek	Rev Works	Forced Induction	64	03-12-2014 01:21 PM
Sneak peek at new 57Xtreme?	vividracing	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	11	02-07-2013 02:24 PM
Sneak Peek! P&L Motorsports Stg.1 BRZ/FRS Turbo Kit.	P&L Motorsports	Forced Induction	179	01-31-2013 07:32 PM

02-14-2014, 10:59 AM	#15
mitosis Member Join Date: Aug 2013 Drives: 2013 FR-S, 2008 Fit Location: Near Sacramento, CA Posts: 77 Thanks: 219 Thanked 65 Times in 30 Posts Mentioned: 5 Post(s)	Oh darn, I thought it had been two weeks already... came in to ask if there were any updates on the progress of this yet but nevermind, I guess I gotta keep being patient. Really looking forward to finally being to see my oil temp like I used to do with my ELM327/Torque App combo. I'm really hoping that the logging duration will improve, I've never been able to log for more than an hour and that's gotten quite frustrating... there's no way this thing only has ~3MB of storage available for logs, right?

02-16-2014, 11:15 PM	#17
dom 86 owner Join Date: Nov 2012 Drives: Toyota 86 GT Location: Hong Kong Posts: 12 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s)	Would that be possible to change metrics to display in Celceus and KM/H instead of F & MPH?

02-16-2014, 11:21 PM	#18
solidONE Senior Member Join Date: Dec 2012 Drives: FR-S Whiteout Location: California Posts: 2,863 Thanks: 1,808 Thanked 791 Times in 611 Posts Mentioned: 42 Post(s)	Brake preshuru rogging? Want!

02-28-2014, 12:56 PM	#22
Shiv@Openflash Senior Member Join Date: Sep 2013 Drives: 2013 FRS Location: SF, CA Posts: 2,629 Thanks: 1,055 Thanked 5,470 Times in 1,494 Posts Mentioned: 605 Post(s)	Quick update: We tried to get Enhanced Datalogging released in time for the weekend but ran out of time. Looks like early next week instead. But here's a list of the new datalogging channels that be added to the current list: Advance Multiplier (for ALL ROM types) A/F sensor #1 current (mA) A/F sensor #1 voltage (V) Accel pedal (%) Ambient T (C) Atmospheric press (kPa) Coolant T (C) Cylinder 1 misfire Cylinder 2 misfire Cylinder 3 misfire Cylinder 4 misfire Injection timing (°CA) Oil Temp (C) Equivalence RC (AFR) Fuel press target (MPa) Fuel pump duty (%) Fuel rail press (MPa) Fuel sytem status Gear status Injection mode Injection time DF (mS) Injection time PF (mS) Injection volume (ml) IAT (C) Knock correction (°CA) MAP (PSI) MAF (g/s) Req quantity highP FPD (ml) Road speed (Km/h) VVT exhaust AT (°FR) VVT intake AT (°FR) ) VVT OCV duty 1 (%) VVT OCV duty 2 (%) There is still plenty of room to add more channels. But these are the ones that will be added with next week's update Cheers shiv

02-28-2014, 01:01 PM	#25
jamesm Banned Join Date: Mar 2013 Drives: 2013 FR-S Location: Orlando, FL Posts: 2,929 Thanks: 1,166 Thanked 2,294 Times in 1,180 Posts Mentioned: 313 Post(s)	looks good. that should be enough to enable proper tuning of larger injectors.

02-28-2014, 01:04 PM	#26
s2d4 Senior Member Join Date: Mar 2013 Drives: R32 GTR, AW11 MR2 SC, GTS86 R Location: OZ Posts: 2,615 Thanks: 603 Thanked 1,224 Times in 708 Posts Mentioned: 35 Post(s)	fbkc and flkc?

User Name		Remember Me?
Password