**New Product** Spyder Fog Light Kits for FR-S!

[samfrs]

Originally Posted by FT-86 SpeedFactory

Sorry, Spyder does not offer those for sale without purchasing the whole kit.

Damn! I was going to ask the same thing.

[FiRStsc10n]

Originally Posted by raytrix

Does this kit come with the panel for Series 10 and Monogram guys with JDM headlight leveler? Been looking for ages for someone to release a kit for us neglected guys.

Is it just me or does the pics they provided have a bezel that would fit 10 Series and the headlight leveler? There is 4 slots which are needed for the 10 Series. Dimmer, Headlight Leveler, Trunk Release, and Fog Light ON/OFF.

This kit comes with an actual fog light button, rather than others I've seen where the button goes where the foglight leveler switch would go.

[rikdrt1]

I really like these because they have the button to turn off, but I also like the Diode Dynamics ones as well. what should I do. ?

[OURO3OROS]

Originally Posted by rikdrt1

I really like these because they have the button to turn off, but I also like the Diode Dynamics ones as well. what should I do. ?

Buy both and let us know!




Sent from my iPhone using Tapatalk

[VacantSky]

for $20 more you could get the fog light kit from nigel which comes with the factory stalk with fog light button. Then instead of using the harness just use the wiring that's already in the car form factory.
The plug that the turn signal plug goes to has an extra wire which is unused. And it gets power to it when the factory fog light stalk is installed and fogs turned on.
All I did was put a female connector in my plug to hit that unused pin and tap into the ground for the turn signal. The relay and fuse for front fogs are installed in the fr-s from factory.... so much easier than running a new harness and relay/fuse/etc... completely oem. And all factory parts - bezels, stalk, and lights... just disregard the harness. cut off and use the H11 plugs to tap into the car

just my 2 cents

[Ammunition]

Does anyone have pics of these post-install yet?

[PNW FRS]

Originally Posted by immaculate

Given that these are glass, hopefully the quality has improved. Non-OEM is always a risk with these types of products, usually winds up costing more through replacements in the long run.

The description from OP is that lenses are polycarbonate...

[immaculate]

Originally Posted by PNW FRS

The description from OP is that lenses are polycarbonate...

That post has been edited...Pretty sure it said glass at one point in time, or I'm just going crazy, which is well within the realm of possibility.

[junior_reyez]

Originally Posted by FT-86 SpeedFactory

Check these out guys! Just in from Spyder are their new Scion FR-S Fog Light Kits available in clear, smoked, and yellow housings!

Spyder Auto's fog lights use high quality materials and are designed with contemporary aesthetics in mind. Not only are they an upgrade over the stale look of the OEM lights, they are also more functional. They are guaranteed to catch the eyes not only automobiles enthusiasts but casual lookers as well.

The new OEM-quality foglights have a polycarbonate lens, for high clarity and overall quality. They are H11 size. The installation is nearly plug-and-play: just install the H11 Foglight Wiring Harness, pop off the old turn signal bezel, and install your new fog lights and bezel! Simple as that. Installation will take 30-60 minutes, on average.

This is the only kit that includes a separate button and bezel to activate your fog lights. Giving you the option to run the fog lights whenever you want them, not just when you have the headlights activated. Plus, you get that OEM-like feel with the kit, just like the fogs were installed from the factory.

Includes:
- Two H11 polycarbonate-lens foglight assemblies, (interchangeable left and right), with 55w H11 halogen bulbs
- Two OEM-style fog light bezels
- One H11 foglight harness with connectors
- One connector harness for fog light activation button - One bezel for fog light activation button
- One stainless steel mounting hardware set


Clear Housing









Smoked Housing









Yellow Housing









Button and Interior Bezel

I Want to thank ya speed factory ! i got my evo3 and greddy intake and i love it ! very fast shipping and amazing products! keep up the amazing work ! i will be ordering these on payday

[FT-86 SpeedFactory]

Originally Posted by PNW FRS

The description from OP is that lenses are polycarbonate...

Originally Posted by immaculate

That post has been edited...Pretty sure it said glass at one point in time, or I'm just going crazy, which is well within the realm of possibility.

You guys are correct. We originally thought these were glass, as the general description stated so. After closer examination and a heads up from a customer of ours, we found that they were not glass.

We apologize for the confusion....

[stueck9356]

Random question, if you leave the fogs turned on 24/7, will they follow control of the headlight stalk? so I can leave the fog switch on, and they will only be on when the headlights come on, but off when I turn the headlights off?

[FR-Slide]

A bit confused; why the 4th cut-out on the bezel? I've only got 2 currently (dimmer and trunk), and with the switch it'd be 3.

Considering these, since price is good and they come with yellow housings, but I don't want extra holes in the dash.

[FT-86 SpeedFactory]

Originally Posted by stueck9356

Random question, if you leave the fogs turned on 24/7, will they follow control of the headlight stalk? so I can leave the fog switch on, and they will only be on when the headlights come on, but off when I turn the headlights off?

You would just need to wire directly into the headlight power signal wire with the large harness to do that. You wouldn't even need the switch and bezel at that point.

Originally Posted by FR-Slide

A bit confused; why the 4th cut-out on the bezel? I've only got 2 currently (dimmer and trunk), and with the switch it'd be 3.

Considering these, since price is good and they come with yellow housings, but I don't want extra holes in the dash.

From the factory, that hole next to the dimmer switch has a factory blank on it. You would remove that from your OEM bezel and install on the new bezel. The Spyder fog light button would then pop into the spot next to the trunk release.

[FR-Slide]

Thanks, at my desk right now and not able to check.

Does the switch supplied light up with the rest of the dash equipment, like the dimmer does? Or only the indicator LED when it's on? And, as asked earlier, does/can this setup trigger the OEM fog light indicator bulb in the dash?