Our Silver Bullet - FT-86 SpeedFactory

[Dezoris]

Originally Posted by Amadeus

Most Perrin tuned guys are getting approximately 240whp on Map 1 and about 250whp on map 3 or 4. Why are you getting 210whp? The dyno links below are on early tune files too - probably version 4 or 5 - so I would guess the newer tune files are at least as good if not slightly better.

http://www.ft86club.com/forums/showp...&postcount=401

http://www.ft86club.com/forums/showp...69&postcount=1

http://www.ft86club.com/forums/showp...0&postcount=17

When i dynod it was v10 map 1 made 210HP. Map4 made 240. But map 4 had knock.

[Dezoris]

Originally Posted by FT-86 SpeedFactory

No revisions, base line and went with it. 256WHP was the dyno on our local unit.

After logging it with out tuner here, it's definitely pig rich and could get a bit more out of but yet, it needs to be 100% reliable which it has done. We'll see how reliable it is once we start really pushing the envelope.

We will be heading west again for a couple FT86 events in 2014. Should come with us to one.

I definately plan on heading out there. Rollin together would be prime.
Surprised you never had Toni revise the tune yet but make sense if you have other plans.

[FT-86 SpeedFactory]

Originally Posted by Dezoris

I definately plan on heading out there. Rollin together would be prime.
Surprised you never had Toni revise the tune yet but make sense if you have other plans.

We're going in January if you need a winter get away.

[Dezoris]

Originally Posted by FT-86 SpeedFactory

We're going in January if you need a winter get away.

Where are you heading?

[FT-86 SpeedFactory]

Originally Posted by Dezoris

Where are you heading?

Going to try and make the 18th event if we can get everything to line up with another event we have to go to out in California. If not we're going to try and find some sort of track day event while out that way if we go later in the month.

http://www.ft86club.com/forums/showp...27&postcount=2

[mtsound]

Hey guys I have a quick question about the APR gt-250 wing on your car.
Is it the 61 or 67 inch version? What is the height of the risers?
How is the performance on track?
I am thinking about adding the wing and a splitter for my time trial car.

thanks

[FT-86 SpeedFactory]

Originally Posted by mtsound

Hey guys I have a quick question about the APR gt-250 wing on your car.
Is it the 61 or 67 inch version? What is the height of the risers?
How is the performance on track?
I am thinking about adding the wing and a splitter for my time trial car.

thanks

It is the 61 inch. Risers are the ones APR sends with. I'd have to look. They designed this kit for the FRS, we got them on our website as well.

I'm liking the performance on track but I can tell it needs some front aero work as well now.

[mtsound]

Originally Posted by FT-86 SpeedFactory

It is the 61 inch. Risers are the ones APR sends with. I'd have to look. They designed this kit for the FRS, we got them on our website as well.

I'm liking the performance on track but I can tell it needs some front aero work as well now.

Thank you for the info that is exactly what I wanted to know

I am also looking for a front splitter, but there aren't many choices other than the APR splitter.

[FR-S89]

Wow. wheels look superb! Are they still on fortune auto coils? any arms?

[FT-86 SpeedFactory]

Originally Posted by FR-S89

Wow. wheels look superb! Are they still on fortune auto coils? any arms?

Still on Fortunes. Cusco rear LCA's.

[CB762]

I'm looking for good shop in Des Moines area that will do custom alignment and corner balancing. Any recommendation? TIA!

[FT-86 SpeedFactory]

[humanshield]

MOAR!

[UltraMarine86]

For a second there I thought I was on a Lambo forum