Wheel Directory: Enkei RPF1 17x9.0 +35 - Page 18 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

midnight23 · 09-19-2013, 01:16 AM

Quote:

Originally Posted by Aznsky

Any rubbing along the fender (or other issues) for those lowered with 245's? Especially those that autox / track their cars?

Did autox a couple weeks back and had zero rubbing issues, I am lowered on tein flex and have 245/40/17 hankook v12 with 17x9 +35.

Aznsky · 09-20-2013, 03:21 PM

Curious if anybody has run this setup on stock suspension? Thinking of doing it next year until I can afford coilovers

Hachi86Roku · 10-01-2013, 01:35 AM

Here's mine, lowered on eibach sportlines and maxed out camber bolts up front (i do need 5mm spacers for the front once i dialed in the camber, didnt need it before)

eSOLOR · 10-11-2013, 11:40 PM

Quote:

Originally Posted by Hachi86Roku

Here's mine, lowered on eibach sportlines and maxed out camber bolts up front (i do need 5mm spacers for the front once i dialed in the camber, didnt need it before)

Looks good man. Got any more pics? Whats your tire size? Im considering getting these wheels and springs at the same time, but I dont know if I should go with the sportlines or pro-kit. I prefer the sportlines but not if its more of a hassle. Did you max out the front camber bolts so it wouldnt rub? How much camber do you have and any other rubbing issues?

FT-86 SpeedFactory · 10-11-2013, 11:46 PM

Quote:

Originally Posted by eSOLOR

Looks good man. Got any more pics? Whats your tire size? Im considering getting these wheels and springs at the same time, but I dont know if I should go with the sportlines or pro-kit. I prefer the sportlines but not if its more of a hassle. Did you max out the front camber bolts so it wouldnt rub? How much camber do you have and any other rubbing issues?

You don't really need any camber to not rub. The 17x9 +35 with 255's square fits fine on stock springs.

We got several clients with this set-up.

Hachi86Roku · 10-12-2013, 02:50 AM

Quote:

Originally Posted by eSOLOR

Looks good man. Got any more pics? Whats your tire size? Im considering getting these wheels and springs at the same time, but I dont know if I should go with the sportlines or pro-kit. I prefer the sportlines but not if its more of a hassle. Did you max out the front camber bolts so it wouldnt rub? How much camber do you have and any other rubbing issues?

Hey, I when I had the car without camber bolts, and just dropped it, the front came to be -0.3 and rear -2.5. At this point with the 245/40 17 tire size I had around 1cm clearance between tire and perch, after adding camber bolts (maxed it out) Im not too sure how much camber the front is now (guessing around 1.75) but the gap between it became dangerously close (around 2-3mm) hence why I had to add 5mm and the space in between the space between the tire and spring perch to be around 8mm (one finger) which is fine for me

EMS Guy · 10-14-2013, 12:55 PM

I was debating on these...The 5x100 bolt pattern seems to be death wish in the wheel world. Surely limits the playing field. Should be 5x114!

Any hoot, these wheels in the +35 are definitely custom. I don't see that combo ANYWHERE other than the place linked above. Tire Rack has higher offsets like 45 and 42. Personally, I think the +35 in a 9" wide is ideal all day long.

It appears they are on sale on that top link too now....hmmm....decisions decisions. I mean, $999 for the customs....NOT BAD AT ALL. Might have to pull the trigger.

EMS Guy · 10-14-2013, 12:59 PM

Looks awesome! Where did you get them from?

feldy · 10-14-2013, 01:29 PM

LOVE DEZOD got mine at xmas time last year from them. they were closed over the break and I still got my wheels 3 days later.

TylerLieberman · 10-14-2013, 01:30 PM

17x9 +35 in 5x100 is easily available now.

Numerous vendors here on this site have them readily available and in stock. Not really custom. The same size in SBC is "custom" and only available through group buys.

wparsons · 10-14-2013, 06:01 PM

Quote:

Originally Posted by stockysnail

They are cheaper on tire rack unless this guy is offering free shipping. Better offset too as 35 will stick out way too much according to the wheel fitment guide that's stickied.

9" +45 with 245's will almost be guaranteed to rub on stock struts, you need coilovers (or spacers, but if you're going that route why get the higher offset) to make them fit, especially if you want to run useful camber.

If you're lowered with a bit of camber the +35 doesn't really poke much at all.

FT-86 SpeedFactory · 10-14-2013, 06:31 PM

We got these in stock as well, ours is free shipping so technically cheaper after you do a shipping calculation on their site. +35 in a 17x9 is the way to go hands down. http://ft86speedfactory.com/enkei-rp...et-of-803.html

SportInjected · 10-14-2013, 09:49 PM

^I got my set from these guys and couldn't be happier!

Wise · 10-15-2013, 12:22 AM

Quote:

Originally Posted by FT-86 SpeedFactory

We got these in stock as well, ours is free shipping so technically cheaper after you do a shipping calculation on their site. +35 in a 17x9 is the way to go hands down. http://ft86speedfactory.com/enkei-rp...et-of-803.html

Do you Ship to Australia? Specifically Melbourne?

10-14-2013, 01:29 PM	#247
feldy Senior Member Join Date: Aug 2011 Drives: 2013 FRS Asphalt Location: SF Bay Area Posts: 1,155 Thanks: 309 Thanked 335 Times in 212 Posts Mentioned: 21 Post(s)	LOVE DEZOD got mine at xmas time last year from them. they were closed over the break and I still got my wheels 3 days later. __________________ 2013 Scion FR-S AT Picked up 5/30/2012

10-14-2013, 01:30 PM	#248
TylerLieberman Senior Member Join Date: Dec 2011 Drives: '24 GR86 Location: Arizona Posts: 3,685 Thanks: 658 Thanked 3,363 Times in 1,584 Posts Mentioned: 16 Post(s)	17x9 +35 in 5x100 is easily available now. Numerous vendors here on this site have them readily available and in stock. Not really custom. The same size in SBC is "custom" and only available through group buys. __________________ Old 2013 FRS Build Thread (SOLD) Hakone 86 GR Build Thread (SOLD)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: Enkei RPF1 17x9.0 +45	LevinPhan	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	265	06-04-2024 11:13 AM
Group Buy: Enkei RPF1 17x9 +35, 17x9.5 +38, 18x9.5 +38 *In Stock*	LSD Motorsports	Groupbuys	246	08-29-2013 01:35 PM
WHITE Enkei NT03+M 18x9.5 / Enkei RPF1 17x9	Touge Factory	Wheels and Tires	2	02-05-2013 04:53 PM

09-20-2013, 03:21 PM	#240
Aznsky Senior Member Join Date: Oct 2009 Drives: Nissan 350Z (sold) 13' Whiteout FRS Location: MI Posts: 197 Thanks: 37 Thanked 53 Times in 30 Posts Mentioned: 1 Post(s)	Curious if anybody has run this setup on stock suspension? Thinking of doing it next year until I can afford coilovers

10-01-2013, 01:35 AM	#241
Hachi86Roku Member Join Date: Sep 2013 Drives: 2013 Scion FR-S Location: West Lafayette, Indiana Posts: 37 Thanks: 2 Thanked 11 Times in 9 Posts Mentioned: 0 Post(s)	Here's mine, lowered on eibach sportlines and maxed out camber bolts up front (i do need 5mm spacers for the front once i dialed in the camber, didnt need it before)

10-14-2013, 12:55 PM	#245
EMS Guy The cynic Join Date: Dec 2012 Drives: An ambulance Location: NY Posts: 89 Thanks: 6 Thanked 15 Times in 12 Posts Mentioned: 0 Post(s)	I was debating on these...The 5x100 bolt pattern seems to be death wish in the wheel world. Surely limits the playing field. Should be 5x114! Any hoot, these wheels in the +35 are definitely custom. I don't see that combo ANYWHERE other than the place linked above. Tire Rack has higher offsets like 45 and 42. Personally, I think the +35 in a 9" wide is ideal all day long. It appears they are on sale on that top link too now....hmmm....decisions decisions. I mean, $999 for the customs....NOT BAD AT ALL. Might have to pull the trigger.

10-14-2013, 12:59 PM	#246
EMS Guy The cynic Join Date: Dec 2012 Drives: An ambulance Location: NY Posts: 89 Thanks: 6 Thanked 15 Times in 12 Posts Mentioned: 0 Post(s)	Looks awesome! Where did you get them from?

10-14-2013, 06:31 PM	#250
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,579 Times in 1,253 Posts Mentioned: 341 Post(s)	We got these in stock as well, ours is free shipping so technically cheaper after you do a shipping calculation on their site. +35 in a 17x9 is the way to go hands down. http://ft86speedfactory.com/enkei-rp...et-of-803.html

User Name		Remember Me?
Password