Who has a built motor? - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Hawaiian · 09-25-2013, 02:25 PM

Countdown to SEMA:

http://www.motorz.tv/semacountdown/

King Tut · 09-25-2013, 02:31 PM

Quote:

Originally Posted by NomoreNA

Believe me guys its not my intention to be secretive, but I am limited on what I can say until sema. I will be making a very detailed build thread once the show is over.

Can you tell us what booth you will be at for SEMA? I have always wanted to be able to attend that event.

SUB-ZERO · 09-28-2013, 09:33 AM

I am building my motor next week I am using cp piston 9.1 comp with carrilo h- beam and waiting for the other parts cam valve gasket ...

Fabron757 · 09-28-2013, 09:46 AM

Quote:

Originally Posted by SUB-ZERO

I am building my motor next week I am using cp piston 9.1 comp with carrilo h- beam and waiting for the other parts cam valve gasket ...

What's your hp goal?

SUB-ZERO · 09-28-2013, 10:13 AM

Quote:

Originally Posted by Fabron757

What's your hp goal?

MY TARGET IS TO DO 10 FLAT ON 1/4 MILE 700-800WHP WITH PT6466 TURBO

JerryMichaels7 · 09-28-2013, 10:22 AM

You will blow 10's out of the water with that. Personally the guys with 400ish horsepower could break into the 10s if they could get some traction.

Tansey86 · 09-28-2013, 10:41 AM

Quote:

Originally Posted by SUB-ZERO

MY TARGET IS TO DO 10 FLAT ON 1/4 MILE 700-800WHP WITH PT6466 TURBO

By 10 hope you mean low 9's with that power.

Dipstik-sportech · 09-28-2013, 10:46 AM

Quote:

Originally Posted by JerryMichaels7

You will blow 10's out of the water with that. Personally the guys with 400ish horsepower could break into the 10s if they could get some traction.

I wish it was that simple man I really do. To run 10's on this car requires a gearing change unless u can shift to 5th really quick at the 1000ft. My car cut a 1.9 60ft with a very soft launch. Even with say a 1.7 I can't see a 10, mid 11 maybe.

SUB-ZERO · 09-28-2013, 01:38 PM

Quote:

Originally Posted by Tansey86

By 10 hope you mean low 9's with that power.

why not bro , I am starting nxt mouth stay tuned

Fabron757 · 09-28-2013, 03:49 PM

Yeah you should break a high 9 with that power. I'm at 470hp@wheels on stock motor and rear end. I should hit high tens if i was to ever run it at the track with some slicks and after market rear end.

MooKz · 09-28-2013, 03:54 PM

It appears the only way the twins will be seeing 10's or even high 9's will be soley based on how it performs out of the hole. I don't have the money but hopefully the people who do will start running slicks and see how good of a 60' would be needed. I feel like 600whp and a good launch would be good for 10s no?

Evasive Motorsports · 09-28-2013, 04:03 PM

We built our motor with HKS pistons and rods.

JerryMichaels7 · 09-28-2013, 04:11 PM

Quote:

Originally Posted by MooKz

It appears the only way the twins will be seeing 10's or even high 9's will be soley based on how it performs out of the hole. I don't have the money but hopefully the people who do will start running slicks and see how good of a 60' would be needed. I feel like 600whp and a good launch would be good for 10s no?

even for a crappy driver yes that would be easy with that....Don hit 11.3 with there 400 kit

pheoxs · 09-29-2013, 06:45 PM

Quote:

Originally Posted by Evasive Motorsports

We built our motor with HKS pistons and rods.

Do you guys have a build thread of the engine?

09-25-2013, 02:25 PM	#43
Hawaiian That guy Join Date: Feb 2012 Drives: Ultramarine mt FR-S Location: chicago Posts: 2,370 Thanks: 692 Thanked 1,389 Times in 730 Posts Mentioned: 71 Post(s)	Countdown to SEMA: http://www.motorz.tv/semacountdown/ __________________ Ultramarine mt FR-S P&L stage 1 turbo Prime Motoring Flex fuel Jr Tuned 506whp @17psi (e73)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Frs300 Fa20club built motor and turbo build	Frs300	Member's Car Journals	32	01-18-2014 05:27 AM
Crawford Limited Turbo BRZ - built motor	Mrqb22	Forced Induction	8	11-11-2013 01:34 PM
FRS300 Rebuild Has Begun..Blown Motor to Built Monster	FA20Club.com	Forced Induction	917	10-20-2013 06:26 AM
When was you 86 built and what no. is it?	Vic_RSA	AFRICA	22	04-16-2013 02:58 PM
Where is each AS1 car built?	Fox	Scion FR-S / Toyota 86 GT86 General Forum	18	01-08-2012 04:33 PM

09-28-2013, 09:33 AM	#45
SUB-ZERO Senior Member Join Date: Aug 2013 Drives: GT86/GTR R35 Location: UAE/DXB Posts: 107 Thanks: 28 Thanked 45 Times in 14 Posts Mentioned: 0 Post(s)	I am building my motor next week I am using cp piston 9.1 comp with carrilo h- beam and waiting for the other parts cam valve gasket ...

09-28-2013, 10:22 AM	#48
JerryMichaels7 Senior Member Join Date: Mar 2013 Drives: Whiteout FRS Location: South, Ga Posts: 348 Thanks: 19 Thanked 144 Times in 80 Posts Mentioned: 2 Post(s)	You will blow 10's out of the water with that. Personally the guys with 400ish horsepower could break into the 10s if they could get some traction.

09-28-2013, 03:49 PM	#52
Fabron757 Senior Member Join Date: Mar 2013 Drives: 2013 blue frs m6 BW EFR 7064 Turbo Location: Hampton VA Posts: 170 Thanks: 2 Thanked 45 Times in 31 Posts Mentioned: 2 Post(s)	Yeah you should break a high 9 with that power. I'm at 470hp@wheels on stock motor and rear end. I should hit high tens if i was to ever run it at the track with some slicks and after market rear end.

09-28-2013, 03:54 PM	#53
MooKz Senior Member Join Date: Feb 2013 Drives: 2013 Scion FR-S Firestorm Red Location: New Jersey Posts: 459 Thanks: 145 Thanked 83 Times in 67 Posts Mentioned: 9 Post(s)	It appears the only way the twins will be seeing 10's or even high 9's will be soley based on how it performs out of the hole. I don't have the money but hopefully the people who do will start running slicks and see how good of a 60' would be needed. I feel like 600whp and a good launch would be good for 10s no?

User Name		Remember Me?
Password