FA20CLUB Ultimate FR-S/BRZ Gauge Integration - Page 26 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

lexusb3 · 08-08-2013, 05:15 PM

Quote:

Originally Posted by ecko04

I meant as in what location when it was installed. I was getting ideas about a potential gauge pod location. Do you run any other gauges or just the FA20 integration?

I had an true boost and aem fail safe that I never powered up but the locations ware the area under the Ac controls I fabrd up that lil space under the Ac controls and put them there but I never finished that lol because I got the gauge from fa20 and never really needed anything else as of yet ..when I do the oil cooler and radiator I may get an oil pressure and keep it under the shifter ... Look into my thread I have a picture someware lol.

xxscaxx · 08-08-2013, 06:09 PM

For the people who purchased this gauge and also bought the Y adapter, have you tested its functionality yet?

I tried to use it with the gauge hooked up (obviously) and my Ecutek cable and I could not datalog. Now i'm guessing its because they are both trying to read the OBD but I was under the impression that we would be able to do this. I'm scared to even try to download a map with the y adapter in there.

That would be a pretty big bummer as this was the sole reason I bought the adapter, so I wouldn't have to unplug the gauge everytime I had to datalog/upate my maps.

FA20Club.com · 08-08-2013, 06:17 PM

ive tested it. you can flash the ecu just fine but the gauge pulls CAN BUS priority on the network when its connected. you should always log with only one item connected anyway cause the transfer rate on the system was never designed to maintain that speed while feeding multiple sources

ecko04 · 08-08-2013, 07:53 PM

Quote:

Originally Posted by lexusb3

... Look into my thread I have a picture someware lol.

Naw too many pages lol

Sent from my SCH-I545 using Tapatalk 2

lexusb3 · 08-08-2013, 07:59 PM

Quote:

Originally Posted by ecko04

Naw too many pages lol

Sent from my SCH-I545 using Tapatalk 2

pages 4, and 5 lol i just picked it randomly and found it score for me im playing to lotto tonight...but ya check it out like i said i never finished it lol

Signature Products · 08-08-2013, 09:37 PM

Ordered my gauge on tuesday and it arrived today! From California to indiana, that's pretty damn good. So I had to install it right away and see how awesome it is. I love this thing! Here some pics and a video.

EDIT: Sorry for all the wind noise in the video. The air conditioning was on blowing right at the phone.

evo4g63 · 08-08-2013, 10:39 PM

Quote:

Originally Posted by xxscaxx

For the people who purchased this gauge and also bought the Y adapter, have you tested its functionality yet?

I tried to use it with the gauge hooked up (obviously) and my Ecutek cable and I could not datalog. Now i'm guessing its because they are both trying to read the OBD but I was under the impression that we would be able to do this. I'm scared to even try to download a map with the y adapter in there.

That would be a pretty big bummer as this was the sole reason I bought the adapter, so I wouldn't have to unplug the gauge everytime I had to datalog/upate my maps.

+1 I didn't even think about it when I bought the Y adapter. Kinda wish I wouldn't have now

xxscaxx · 08-09-2013, 12:48 AM

Quote:

Originally Posted by FA20Club.com

ive tested it. you can flash the ecu just fine but the gauge pulls CAN BUS priority on the network when its connected. you should always log with only one item connected anyway cause the transfer rate on the system was never designed to maintain that speed while feeding multiple sources

Thats what I thought but for some reason I just assumed it would do both. Least I know I can flash but theres really no point in that as I'd have to do datalogging after I reflash anyway lol.

I like to watch my AFR on the gauge because the readout is nice and big, and the ecutek datalogging screen layout leaves something to be desired.

white devil · 08-12-2013, 08:28 PM

Just had this gauge installed and it is AWESOME!!!!

Sookainian · 09-24-2013, 07:16 AM

I've just received and installed my gauge. But can someone please advise why my Egt (exhaust gas temp) reading is 0 ?

My car is totally stock ft86.

[ame="http://www.youtube.com/watch?v=sMqu5WvRcPo&feature=share&list=UUTZ6o535po yxBRxgQlQGcow"]P3car gauge - YouTube[/ame]

King Tut · 09-24-2013, 10:45 AM

Quote:

Originally Posted by Sookainian

I've just received and installed my gauge. But can someone please advise why my Egt (exhaust gas temp) reading is 0 ?

Because our cars do not have an exhaust gas temp sensor so there is nothing to display.

Sookainian · 09-24-2013, 12:22 PM

Quote:

Originally Posted by King Tut

Because our cars do not have an exhaust gas temp sensor so there is nothing to display.

Does your gauge read out show 0 also ?

But i thought for this gauge take the reading from the ECU, so there should be a readout without additional sensor right ?

http://www.p3cars.com/frz-install/

this is what it show on p3car website "Egt: Exhaust Gas Temperature. This is the temp of the exhaust gas as calculated by your ECU."

Signature Products · 09-24-2013, 12:38 PM

Quote:

Originally Posted by Sookainian

I've just received and installed my gauge. But can someone please advise why my Egt (exhaust gas temp) reading is 0 ? ]

I think the egt must be read thru the oxygen sensor. I only have my gauge hooked up to the obd port and mine works as it should. Is your afr reading ok?

Refer to post #356. The first pic is a video. I cycle thru each sensor and they all display correctly. Including egt.

ecko04 · 09-24-2013, 12:53 PM

Quote:

Originally Posted by Signature Products

I think the egt must be read thru the oxygen sensor. I only have my gauge hooked up to the obd port and mine works as it should. Is your afr reading ok?

Refer to post #356. The first pic is a video. I cycle thru each sensor and they all display correctly. Including egt.

Correct, it adjusts based on the oxygen sensor.

08-08-2013, 09:37 PM	#356
Signature Products Member Join Date: Feb 2013 Drives: FR-S Location: Indiana Posts: 53 Thanks: 19 Thanked 27 Times in 19 Posts Mentioned: 0 Post(s)	Ordered my gauge on tuesday and it arrived today! From California to indiana, that's pretty damn good. So I had to install it right away and see how awesome it is. I love this thing! Here some pics and a video. EDIT: Sorry for all the wind noise in the video. The air conditioning was on blowing right at the phone. Last edited by Signature Products; 08-08-2013 at 10:52 PM.

08-12-2013, 08:28 PM	#359
white devil Go Gators! Join Date: Jun 2012 Drives: FRS White-out "blown up" Location: Knox area, TN Posts: 394 Thanks: 245 Thanked 111 Times in 79 Posts Mentioned: 5 Post(s)	Just had this gauge installed and it is AWESOME!!!! __________________ "What do you mean I voided my warranty??" FA20 Turbo + HRI Tune + FA20 Flex fuel + FA20club intake + SRT headerback exhaust + FA20 headers + KW3's + Hotchkis front and rear sway bars + Cusco strut tower bar + Perrin oil cooler + Perrin pulley & brake stop thingy + GFB water & alternator pulleys + Crawford air/oil separator

09-24-2013, 07:16 AM	#360
Sookainian Senior Member Join Date: Mar 2013 Drives: Toyota GT86 Location: Singapore Posts: 145 Thanks: 7 Thanked 13 Times in 10 Posts Mentioned: 2 Post(s)	I've just received and installed my gauge. But can someone please advise why my Egt (exhaust gas temp) reading is 0 ? My car is totally stock ft86. [ame="http://www.youtube.com/watch?v=sMqu5WvRcPo&feature=share&list=UUTZ6o535po yxBRxgQlQGcow"]P3car gauge - YouTube[/ame] Last edited by Sookainian; 09-24-2013 at 09:29 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LHD 3-meter gauge-pod?	TuxedoCartman	Cosmetic Modification (Interior/Exterior/Lighting)	27	02-11-2015 06:19 PM
Dash Cam + HU + Reverse Integration	JDMSushi	Electronics \| Audio \| NAV \| Infotainment	0	12-04-2012 06:47 PM
iPod®/USB Integration in the glove box?	8987846	Electronics \| Audio \| NAV \| Infotainment	26	12-04-2012 12:45 AM
Temperature Gauge a dummy gauge?	bambbrose	BRZ First-Gen (2012+) — General Topics	40	08-19-2012 04:29 PM
Gauge Sweep?	himbo	BRZ First-Gen (2012+) — General Topics	17	12-12-2011 11:39 AM

08-08-2013, 06:09 PM	#352
xxscaxx Senior Member Join Date: Jul 2012 Drives: 2013 SWP BRZ Location: New York Posts: 2,240 Thanks: 458 Thanked 878 Times in 556 Posts Mentioned: 34 Post(s)	For the people who purchased this gauge and also bought the Y adapter, have you tested its functionality yet? I tried to use it with the gauge hooked up (obviously) and my Ecutek cable and I could not datalog. Now i'm guessing its because they are both trying to read the OBD but I was under the impression that we would be able to do this. I'm scared to even try to download a map with the y adapter in there. That would be a pretty big bummer as this was the sole reason I bought the adapter, so I wouldn't have to unplug the gauge everytime I had to datalog/upate my maps.

08-08-2013, 06:17 PM	#353
FA20Club.com Banned Join Date: Aug 2012 Drives: 2013 White Out FR-S Location: Florida Posts: 1,335 Thanks: 24 Thanked 1,162 Times in 501 Posts Mentioned: 323 Post(s)	ive tested it. you can flash the ecu just fine but the gauge pulls CAN BUS priority on the network when its connected. you should always log with only one item connected anyway cause the transfer rate on the system was never designed to maintain that speed while feeding multiple sources

User Name		Remember Me?
Password