Nameless Performance Equal Length Stepped Header - Page 144 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Scooby South · 08-18-2013, 01:20 AM

Should be good now..

[ame]http://youtu.be/cG0J_Xzg-NA[/ame]

xjohnx · 08-18-2013, 01:27 AM

Quote:

Originally Posted by Scooby South

not until Mid Sept .. I leave for Calif on Tues.. and won't be back till Sept 1st.. School Starts on the 2nd..*yes full time Student for this ole' fart.. then Nats on the 5th and 6th of Sept.. so if I do it won't be till after that..

i'd be happy to keep the cobwebs blown out of it while you're gone. just ship the header up here.

xjohnx · 08-18-2013, 01:43 AM

Quote:

Originally Posted by xjohnx

i'd be happy to keep the cobwebs blown out of it while you're gone. just ship the header up here.

@Scooby South - perera double dares you.

Scooby South · 08-18-2013, 02:08 AM

Quote:

Originally Posted by xjohnx

@Scooby South - perera double dares you.

HA...

Boil · 08-18-2013, 03:12 AM

Quote:

Originally Posted by Scooby South

Header and 200 Cell Hi-flo Catted Midpipe.. all Legal..

And the whole NAMELESS Exhaust from the Header back including Axleback with 5 in mufflers..

One - What is that canister at the end of the Midpipe…? The one that looks like it is connected by a small diameter tube…?

Two - So they ARE doing a Midpipe now…!?! Meaning, we can order a COMPLETE exhaust port to exit tip system from Nameless in the near future…!?!

Thanks!

slates74 · 08-18-2013, 03:17 AM

I believe that canister is a helmholtz resonator which helps eliminate drone, could be wrong though.

Hawaiian · 08-18-2013, 03:48 AM

Looks like an exhaust leak on the flange.

Captain Snooze · 08-18-2013, 04:18 AM

Quote:

Originally Posted by Hawaiian

Looks like an exhaust leak on the flange.

Nice spotting!

Scooby South · 08-18-2013, 10:46 AM

Quote:

Originally Posted by Hawaiian

Looks like an exhaust leak on the flange.

I guess its possible. Guaranteed it not leaking on my car tho

.. Since this header is the Prototype and my car is the 3rd car this header has been on, I would expect minor In-perfections, but I am sure you are aware of that..

... Not worried as the final product should be even better with a more finalized jig. Thats what my job is.. to evaluate the prototype..

... Mahalo and Aloha..

Bill

Hawaiian · 08-18-2013, 11:27 AM

Quote:

Originally Posted by Scooby South

I guess its possible. Guaranteed it not leaking on my car tho

.. Since this header is the Prototype and my car is the 3rd car this header has been on, I would expect minor In-perfections, but I am sure you are aware of that..

... Not worried as the final product should be even better with a more finalized jig. Thats what my job is.. to evaluate the prototype..

... Mahalo and Aloha..

Bill

I'm guessing with the pattern of the soot, the interior bolt on that flange wasn't torqued properly. That or the flange could be slightly on a bias. Without a level and the header in hand it's hard to say.

If you send it up to me i can measure that, and take a third party dyno... just saying.

skye67 · 08-18-2013, 03:11 PM

Where can i buy this catted header? I dont see it on there website.

xjohnx · 08-18-2013, 04:01 PM

Quote:

Originally Posted by skye67

Where can i buy this catted header? I dont see it on there website.

Check the posts above you. 3-4 weeks before production starts.

nelsmar · 08-18-2013, 04:28 PM

Is this real life?

Sonolin · 08-18-2013, 04:35 PM

That didn't sound very good at all, but I'm hoping its mostly the mic

Although, if gives as much power as it sounds like it does, I'd do it.

08-18-2013, 03:48 AM	#2009
Hawaiian That guy Join Date: Feb 2012 Drives: Ultramarine mt FR-S Location: chicago Posts: 2,370 Thanks: 692 Thanked 1,389 Times in 730 Posts Mentioned: 71 Post(s) Tagged: 0 Thread(s)	Looks like an exhaust leak on the flange. __________________ Ultramarine mt FR-S P&L stage 1 turbo Prime Motoring Flex fuel Jr Tuned 506whp @17psi (e73)

08-18-2013, 04:28 PM	#2015
nelsmar Senior Member Join Date: Feb 2013 Drives: FR-S Location: Phoenix Posts: 2,605 Thanks: 733 Thanked 2,361 Times in 1,031 Posts Mentioned: 345 Post(s) Tagged: 3 Thread(s)	Is this real life? __________________ When I grow up, I wanna be God. My flickr - *Canibeat* Local magazine scout Old Setup: Vortech Supercharged 360WHP/262WTQ @ 11.5psi My build thread - WTF happened to nelsmar's car thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nameless Performance BRZ Axleback Exhaust	ESBjiujitsu	Engine, Exhaust, Transmission	1377	04-21-2020 03:23 AM
Nameless Performance Axleback is available for pre-order.	Nameless Performance Inc.	Engine, Exhaust, Bolt-Ons	114	07-23-2012 11:38 PM
Nameless Performance Downpipe is available for pre-order.	Nameless Performance Inc.	Engine, Exhaust, Bolt-Ons	4	07-12-2012 05:57 PM
We are Nameless Performance.	John@Nameless	Announcements, Contests, Giveaways	22	06-19-2012 12:32 AM
Nameless Performance is here.	Nameless Performance Inc.	Engine, Exhaust, Bolt-Ons	16	06-06-2012 05:32 AM

08-18-2013, 03:17 AM	#2008
slates74 Senior Member Join Date: Feb 2013 Drives: 13 SWP BRZ LTD 6MT Location: nnj Posts: 212 Thanks: 127 Thanked 79 Times in 49 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I believe that canister is a helmholtz resonator which helps eliminate drone, could be wrong though.

08-18-2013, 03:11 PM	#2013
skye67 Senior Member Join Date: Jul 2013 Drives: 2013 black AT, OFT, 4.65 Location: Fresno, California Posts: 187 Thanks: 180 Thanked 69 Times in 49 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Where can i buy this catted header? I dont see it on there website.

08-18-2013, 04:35 PM	#2016
Sonolin Banned Join Date: Sep 2012 Drives: 2013 Scion FR-S Location: SoCal Posts: 885 Thanks: 1,489 Thanked 289 Times in 176 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	That didn't sound very good at all, but I'm hoping its mostly the mic Although, if gives as much power as it sounds like it does, I'd do it.

User Name		Remember Me?
Password