FA20CLUB 60 Trim Turbo 16 PSI Results Are In - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Taber · 07-05-2013, 11:37 PM

Quote:

Originally Posted by FA20Club.com

this car was on 5 psi for 9k miles but we have 93 octane down here. the kit comes with a base tune to load we tune it remotely from that point after installation.

I'm up in Maine, and there's not much up here for support. That being said I have easy access to a dyno and installation, but its at a VW/Audi/BMW specialty shop...

FA20Club.com · 07-05-2013, 11:40 PM

if they know what there are doing to bolt on a kit no worries there. i do all the tuning so they get the easy part

Taber · 07-06-2013, 12:24 AM

Quote:

Originally Posted by FA20Club.com

if they know what there are doing to bolt on a kit no worries there. i do all the tuning so they get the easy part

Not worried about install at all, just worried about tuning and ordering the correct parts mix to start off with.

FA20Club.com · 07-06-2013, 12:26 AM

my kit works with all front pipes and exhaust no worries there. we take care of the tuning youre in good hands

Dezoris · 07-06-2013, 02:43 AM

Tony considering making this kit my next review and project. Can you share any logs from your customer cars so I can see IAT/Oil/Timing etc?

PM me if need be.

lbroskee · 07-06-2013, 02:48 AM

@lexusb3 do u have a lightweight crank pulley lik the perrin one on here? just wondering b/c idk if itll even hold up to this lvl of power. @FA20Club.com any idea?

lexusb3 · 07-06-2013, 03:13 AM

Quote:

Originally Posted by lbroskee

@lexusb3 do u have a lightweight crank pulley lik the perrin one on here? just wondering b/c idk if itll even hold up to this lvl of power. @FA20Club.com any idea?

No I have the stock pulley @lbroskee

86pro · 07-06-2013, 04:09 AM

Tony from FA20CLUB i gotta say thank you so much for the tuning tonight. Jumped online now after taking betsy out for a spin and Yea!!!!!!!!! she feels good. By far the best customer service. lexusb3 your car is sickkkkkkk .

nlp187 · 07-06-2013, 05:17 AM

Ahh. So jealous of you people getting to ride in it.

cf6mech · 07-06-2013, 06:51 AM

Tony,....if you don't mind me asking what crank bearings you running,....hopefully not stock,....personal experience and a few others say that's a bad idea.

scraejtp · 07-06-2013, 08:14 AM

Quote:

Originally Posted by cf6mech

Tony,....if you don't mind me asking what crank bearings you running,....hopefully not stock,....personal experience and a few others say that's a bad idea.

I wasn't aware of failed/spun crank bearings on these motors. Can you share more information on the failures?

xXDeathMaliCeXx · 07-06-2013, 10:57 AM

I'm considering this kit as well as the AVO kit. Not planning on making massive power, just enough to have some more fun with grippier tires.

Quote:

Originally Posted by Dezoris

Tony considering making this kit my next review and project.

Can't wait to see this!
Do you know right off hand if it is possible to track your boost level through torque? I just picked up a nexus 7 the other day and ordered a bluetooth odb2 adapter.

chadstyle · 07-06-2013, 11:03 AM

This car is a BEAST!! I am really impressed with it...spools so fast and the power is incredible. It was wet when @lexusb3 took me for a ride and no exaggeration it took less than a second to go from 3k-redline in 1st-4th gears. That's FAST!! Anxious to go for a ride when the streets are dry and the tires hook up.

To be honest, this setup is too much power for me. It's nice to know that there is tons of headroom to turn it up but I'm sure ill be happy on 5.3 PSi and 93 octane. Ill load an E85 map for fun but I'll let Brandon be the HP king down here no doubt. Well, until @Frs300 gets his car back

FA20Club.com · 07-06-2013, 11:09 AM

Quote:

Originally Posted by Dezoris

Tony considering making this kit my next review and project. Can you share any logs from your customer cars so I can see IAT/Oil/Timing etc?

PM me if need be.

no timing curves will be shared from me. that took me quite a long time to build that table. i will share with you info for IAT & Oil temps but from which geographic location considering we have kits in different areas. Quebec, Toronto, Texas, Arizona, Dubai, Florida, New Jersey etc....?

07-06-2013, 12:26 AM	#46
FA20Club.com Banned Join Date: Aug 2012 Drives: 2013 White Out FR-S Location: Florida Posts: 1,335 Thanks: 24 Thanked 1,162 Times in 501 Posts Mentioned: 323 Post(s) Tagged: 2 Thread(s)	my kit works with all front pipes and exhaust no worries there. we take care of the tuning youre in good hands Last edited by FA20Club.com; 07-06-2013 at 11:07 AM.

07-06-2013, 02:43 AM	#47
Dezoris Senior Member Join Date: Aug 2012 Drives: FR-S Location: IL Posts: 2,857 Thanks: 519 Thanked 2,998 Times in 1,095 Posts Mentioned: 159 Post(s) Tagged: 1 Thread(s)	Tony considering making this kit my next review and project. Can you share any logs from your customer cars so I can see IAT/Oil/Timing etc? PM me if need be. __________________ SAVAGEGEESE

07-06-2013, 11:03 AM	#55
chadstyle Senior Member Join Date: Oct 2012 Drives: 2013 Subaru BR-Z Limited Location: Fort Lauderdale, Florida Posts: 883 Thanks: 407 Thanked 562 Times in 294 Posts Mentioned: 42 Post(s) Tagged: 4 Thread(s)	This car is a BEAST!! I am really impressed with it...spools so fast and the power is incredible. It was wet when @lexusb3 took me for a ride and no exaggeration it took less than a second to go from 3k-redline in 1st-4th gears. That's FAST!! Anxious to go for a ride when the streets are dry and the tires hook up. To be honest, this setup is too much power for me. It's nice to know that there is tons of headroom to turn it up but I'm sure ill be happy on 5.3 PSi and 93 octane. Ill load an E85 map for fun but I'll let Brandon be the HP king down here no doubt. Well, until @Frs300 gets his car back __________________ ChadStyle's Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FA20CLUB 57 Trim Turbo Kit Results Automatic 7 PSI	FA20Club.com	Forced Induction	39	08-02-2013 03:29 PM
FA20CLUB Turbo Kit Results Are In...60 Trim Impressive	FA20Club.com	Forced Induction	177	07-26-2013 05:49 PM
Visconti vs FA20Club vs Stock Tune Dyno Results	mechaghost	Engine, Exhaust, Transmission	153	07-08-2013 12:35 PM
JFlogerzi's FA20Club 91 and E85 Tune Results and Impressions	jflogerzi	Engine, Exhaust, Transmission	16	03-24-2013 02:09 AM
FA20CLUB.com Stage 1 ECUTEK Reflash Results	FA20Club.com	Engine, Exhaust, Transmission	20	08-25-2012 08:02 PM

07-05-2013, 11:40 PM	#44
FA20Club.com Banned Join Date: Aug 2012 Drives: 2013 White Out FR-S Location: Florida Posts: 1,335 Thanks: 24 Thanked 1,162 Times in 501 Posts Mentioned: 323 Post(s) Tagged: 2 Thread(s)	if they know what there are doing to bolt on a kit no worries there. i do all the tuning so they get the easy part

07-06-2013, 04:09 AM	#50
86pro Senior Member Join Date: Sep 2012 Drives: frs Location: tdot Posts: 149 Thanks: 13 Thanked 22 Times in 19 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Tony from FA20CLUB i gotta say thank you so much for the tuning tonight. Jumped online now after taking betsy out for a spin and Yea!!!!!!!!! she feels good. By far the best customer service. lexusb3 your car is sickkkkkkk .

07-06-2013, 05:17 AM	#51
nlp187 Member Join Date: Apr 2013 Drives: 2013 BRZ Limited Location: Waco, TX Posts: 37 Thanks: 15 Thanked 6 Times in 6 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Ahh. So jealous of you people getting to ride in it.

07-06-2013, 06:51 AM	#52
cf6mech Senior Member Join Date: Sep 2012 Drives: FRS Silver LS1 swapped. Location: Texas Posts: 752 Thanks: 621 Thanked 766 Times in 302 Posts Mentioned: 39 Post(s) Tagged: 2 Thread(s)	Tony,....if you don't mind me asking what crank bearings you running,....hopefully not stock,....personal experience and a few others say that's a bad idea.

User Name		Remember Me?
Password