DIY Trailer Hitch Mount - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Onealpha · 06-11-2013, 12:02 PM

Nice!

SloS14 · 06-11-2013, 01:00 PM

You are a scholar and a gentleman. Nice fabbing!

qoncept · 06-13-2013, 12:24 PM

Updated with wiring

Xdragonxb0i · 06-13-2013, 11:48 PM

So i see that the weakest point is the welds on the two side flaps that hold the beam that is horizontally across the car. I understand that welds are strong, But if the welds fail the tow hook will fall off correct?

im looking to get a tow hook in the future, i want to haul kayaks lol

powerj2 · 06-14-2013, 12:08 AM

this is pretty epic

qoncept · 06-20-2013, 04:11 PM

Quote:

Originally Posted by Xdragonxb0i

So i see that the weakest point is the welds on the two side flaps that hold the beam that is horizontally across the car. I understand that welds are strong, But if the welds fail the tow hook will fall off correct?

im looking to get a tow hook in the future, i want to haul kayaks lol

I would say yes, that's probably the weakest point, and yes, if they were to fail, the chains are going with it. I'm confident in the welds. They're a strong corner weld (the pieces were fixed both outside of the corner and the entire corner was filled, then welded again on the inside). Also, the cross beam is very close to the bracket so there is very little lateral force on the tabs. If there was about another 1/8" of clearance the cross beam could be welded directly to the bracket without the tabs. :\

kask2_6.0's hitches have will gussets for additional strength here. I decided they weren't necessary for mine.

jwjknorr · 06-21-2013, 02:06 PM

I want to tow my jet ski, clearly that may be to heavy for this, any idea on making a stronger one for heavier tows. Clearly we cant tow a boat, but a jetski , or small utility trailer probably can be done. Thoughts?

qoncept · 06-21-2013, 02:11 PM

Quote:

Originally Posted by jwjknorr

I want to tow my jet ski, clearly that may be to heavy for this, any idea on making a stronger one for heavier tows. Clearly we cant tow a boat, but a jetski , or small utility trailer probably can be done. Thoughts?

With some additional gussets I think this design is probably about as strong as it's going to get. Maybe gusseting from the bottom of the receiver back to the mounting brackets. Ideally a lateral piece would help but I really don't know where one could go. I installed my Perrin catback last night which opened up the back a lot (I now have about 4" of clearance), I'll poke my head under some time this weekend and see if anything jumps out.

I'd estimate my trailer weighs about 150lbs, wheels/tires 200lbs, and the rest of what I load for autox another 100lbs. So probably a little under 500 total. The car tows it just fine. It's noticeable when starting from a stop but not so much while driving.

mit_peid · 06-21-2013, 02:17 PM

your photos are showing up as broken links

qoncept · 06-21-2013, 03:06 PM

Quote:

Originally Posted by mit_peid

your photos are showing up as broken links

They're working for me. Are you at work?

kask2_6.0 · 06-21-2013, 03:15 PM

Thanks for the kind words qoncept. Hitch looks good.

How has towing been so far? I'm about done fabbing my trailer to fit 2 dirt bikes. It will sit 8" from the ground, use my stock brz wheels, and have about a 50 lb tongue weight. @ScoobySouth will also be testing the hitch in the next couple weeks for more input before making the final version.

qoncept · 06-21-2013, 03:32 PM

Quote:

Originally Posted by kask2_6.0

Thanks for the kind words qoncept. Hitch looks good.

How has towing been so far? I'm about done fabbing my trailer to fit 2 dirt bikes. It will sit 8" from the ground, use my stock brz wheels, and have about a 50 lb tongue weight. @ScoobySouth will also be testing the hitch in the next couple weeks for more input before making the final version.

So far so good. Backing it up is an exercise in patience - once the trailer starts turning its almost too late to counter steer. Might end up putting a longer tongue on it. The car doesn't mind the load, though, and I can brake as fast as I'd want to with all that behind me.

mit_peid · 06-21-2013, 06:01 PM

Quote:

Originally Posted by qoncept

They're working for me. Are you at work?

Yeah, maybe that's the reason.... i'll check at home (sounds like a problem on my end).

qoncept · 06-26-2013, 11:20 AM

FYI, kask6_2.0 has begun taking preorders for his hitches. Very reasonable price and lightweight. http://www.ft86club.com/forums/showthread.php?t=40098

06-13-2013, 11:48 PM	#18
Xdragonxb0i Senior Member Join Date: Nov 2011 Drives: ex500r Location: AR Posts: 859 Thanks: 13 Thanked 105 Times in 77 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	So i see that the weakest point is the welds on the two side flaps that hold the beam that is horizontally across the car. I understand that welds are strong, But if the welds fail the tow hook will fall off correct? im looking to get a tow hook in the future, i want to haul kayaks lol __________________

06-14-2013, 12:08 AM	#19
powerj2 Senior Member Join Date: Jun 2012 Drives: 2013 Scion FRS Location: St.Johns Newfoundland Posts: 213 Thanks: 142 Thanked 104 Times in 47 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	this is pretty epic __________________ Pew

06-21-2013, 02:17 PM	#23
mit_peid Boosted Noob Join Date: Nov 2012 Drives: '13 FRS MT KW SC, '05 4Runner 4WD Location: SoCal Posts: 883 Thanks: 353 Thanked 343 Times in 175 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	your photos are showing up as broken links __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trailer Hitch	Jack Black	Tracking / Autocross / HPDE / Drifting	31	12-22-2015 09:26 PM
FRS BRZ Receiver Hitch	phm14	Scion FR-S / Toyota 86 GT86 General Forum	34	03-04-2014 08:03 PM
Are there any trailer hitch options yet	Scooby South	BRZ First-Gen (2012+) — General Topics	133	08-06-2013 06:59 PM
DIY: Making a GoPro camera mount with a GrimmSpeed front plate mount	PMok	DIY (Do-It-Yourself) Guides	2	06-11-2013 11:58 AM
Need Low Profile Trailer..Someone Help	whitefrs	Tracking / Autocross / HPDE / Drifting	0	06-02-2013 06:59 PM

06-11-2013, 12:02 PM	#15
Onealpha Member Join Date: Apr 2013 Drives: 2013 Subaru BRZ Location: USA Posts: 79 Thanks: 15 Thanked 35 Times in 22 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Nice!

06-11-2013, 01:00 PM	#16
SloS14 Senior Member Join Date: Apr 2013 Drives: 2013 FR-S whiteout Location: United States Posts: 726 Thanks: 381 Thanked 652 Times in 256 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	You are a scholar and a gentleman. Nice fabbing!

06-21-2013, 02:06 PM	#21
jwjknorr Senior Member Join Date: Oct 2012 Drives: FRS 2013 Location: South Jersey Posts: 139 Thanks: 13 Thanked 17 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I want to tow my jet ski, clearly that may be to heavy for this, any idea on making a stronger one for heavier tows. Clearly we cant tow a boat, but a jetski , or small utility trailer probably can be done. Thoughts?

06-21-2013, 03:15 PM	#25
kask2_6.0 Senior Member Join Date: Sep 2012 Drives: 13 BRZ Location: San Diego Posts: 724 Thanks: 229 Thanked 512 Times in 256 Posts Mentioned: 18 Post(s) Tagged: 1 Thread(s)	Thanks for the kind words qoncept. Hitch looks good. How has towing been so far? I'm about done fabbing my trailer to fit 2 dirt bikes. It will sit 8" from the ground, use my stock brz wheels, and have about a 50 lb tongue weight. @ScoobySouth will also be testing the hitch in the next couple weeks for more input before making the final version.

User Name		Remember Me?
Password