Wheel Directory: Enkei RC-T4 18x8.5 +48 - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DarrenDriven · 09-27-2012, 01:46 PM

Added to the Wheel Directory:
http://tinyurl.com/86wheels

ModBargains · 09-27-2012, 02:08 PM

So I did more research for you guys and this is all the 5x100 fitments available:

17x7.5 ET48mm - 5x100
17x8.0 ET35mm - 5x100
17x8.0 ET48mm - 5x100
18x8.5 ET48mm - 5x100

diirk · 09-27-2012, 02:19 PM

17x8.0 ET35mm - 5x100 is perfect.

ModBargains · 09-27-2012, 02:40 PM

Quote:

Originally Posted by RAYSSPL

Too high of an offset for an aftermarket wheel. When do you think we'll see some lower offset and wider widths? I'm personally interested in a 17x9 and 17x10 +35 enkei RPF1 or even the RC-T4.

I don't think it's too high of an offset especially considering how good it looks on Cusco's FRS. It may not be as "flush/hella flush" for your preference, but it fits the FRS/BRZ with no problems. The only 5x100 RPF1 application that Enkei makes is:

16x7.0 ET45mm
17x7.5 ET48mm
17x8.0 ET35mm
17x8.0 ET45mm
18x7.5 ET48mm
18x8.0 ET35mm
18x8.0 ET45mm

Quote:

Originally Posted by diirk

The 17x8 would be worth considering if the offset was +35 or so.

They make a 17x8.0 ET35mm

Quote:

Originally Posted by ngabdala

Does offset affect what size brakes can be installed?

Yes, the spoke design along with aggressive offsets can present a problem clearing oversized brake calipers.

Quote:

Originally Posted by zkubidu

Agreed with the above two posts; I'd definitely be interested if 17x9 +35 were around. Also, a confirmation on weights for the aforementioned sizes would be greatly appreciated. Thanks for the news!

I'll try to find out the weights.

Quote:

Originally Posted by Superhatch

Is there any benefit, aside from looks for having a lower offset? Is there a concern that if the offset is too high you will have inside fender rub or something?

OP...these things look great. If you get pricing, PM me. Also, do you have other pics on the BRZ/FRZ, perhaps in another color?

Having a lower offset will make the sit more "flush" to the fender if you want a more aggressive look. However, I think the 18x8.5 ET48mm fits just fine and it looks great too! If it's not flush enough, you can always add spacers. I will let you know on pricing!

Quote:

Originally Posted by Superhatch

18x9.5 +30

That's not a 5x100 wheel.

Quote:

Originally Posted by ebphoto

personally i dont like sunk wheels.
they dont have the x9.5 +30 in 5x100.
ive always been a fan of these in bronze.. would love them for track wheels in all honesty.

They would make a great track wheel!

Quote:

Originally Posted by mickey177

I would love a pair of 17 or 18 in white. But please post the weight.Thanks

I'll try to find out the weights for you.

Quote:

Originally Posted by mickey177

I think your are close. Because i looked around and there was a groupbuy on this site http://www.iwsti.com/forums/vendor-g...er-rare-2.html for 18x9 and some said it weigh 18lbs. I wish these things were more readily available from the manufacture.

The reason why some wheels are not available in the U.S. is because of different wheel regulations. Yes, and I wish we had more options here, but that's why I'm going to work on slowly bringing more JDM wheel options to the FRS / BRZ enthusiasts.

-Frank

diirk · 09-27-2012, 02:59 PM

Quote:

Originally Posted by ModBargains

The reason why some wheels are not available in the U.S. is because of different wheel regulations. Yes, and I wish we had more options here, but that's why I'm going to work on slowly bringing more JDM wheel options to the FRS / BRZ enthusiasts.

-Frank

I think many of us really appreciate your effort on our behalf.

mickey177 · 09-27-2012, 03:11 PM

Quote:

Originally Posted by ModBargains

The reason why some wheels are not available in the U.S. is because of different wheel regulations. Yes, and I wish we had more options here, but that's why I'm going to work on slowly bringing more JDM wheel options to the FRS / BRZ enthusiasts.

-Frank

Thanks can't wait to see more selection. Would love to see more white wheels

whitejdm · 09-27-2012, 03:53 PM

LOVE these wheels! Bump for some weight measurements on the 17's and a ball park price.

ModBargains · 09-27-2012, 05:00 PM

Update 9/27/12:

Okay so Cusco is currently in negotiations with Enkei and IRF (japanese company who owns the rights to sell the RC-T4) concerning pricing and availability. So ModBargains and Cusco will be working on hopefully getting some a custom sizing for the FRS/BRZ guys.

I'm going to try to get them to manufacture a 18x8.5 ET38mm size which should be a better looking fitment on a FRS/BRZ. We would need to order a minimum of 10 sets to make this happen. Problem is that it can't be multiple colors, just one color.

-Frank

diirk · 09-27-2012, 05:06 PM

Might be worth it to throw up a poll so see what size/color would be most popular.

Foobar · 09-27-2012, 05:08 PM

I'd be interested in the 17x8 +35's in Bronze. Any estimates on pricing?

ebphoto · 09-28-2012, 01:41 PM

should really go for a 18x9 +35 or something..
this car is 17x9 +35 with 255... not sunk, and fits big tires... i think that would be a better fitment.

diirk · 09-28-2012, 01:43 PM

Quote:

Originally Posted by ebphoto

should really go for a 18x9 +35 or something..
this car is 17x9 +35 with 255... not sunk, and fits big tires... i think that would be a better fitment.

Looks good. Do you have any more pics?

ebphoto · 09-28-2012, 01:50 PM

Quote:

Originally Posted by diirk

Looks good. Do you have any more pics?

not my car : http://www.ft86club.com/forums/showthread.php?t=17040

dsgerbc · 09-28-2012, 03:39 PM

I love the look of these in gold (and my Braid order of a similarly-looking wheel is not happening), but there are no size/offset options that really appeal to me.

I could be conviced to get 17x8 +48, if I see pics of it. But at the moment I'm inclined to think that this design will look small in 17".

18x8.5 +48 is close to what I'd want, but I don't think it offers enough clearance to the spring seat with a decent tire.

View Poll Results: Which RC-T4 setup would you go with?
18x8.5 ET38mm - Gunmetal	15	22.39%
18x8.5 ET38mm - Gold	5	7.46%
18x8.5 ET38mm - Bronze	5	7.46%
18x8.5 ET38mm - Silver	6	8.96%
18x8.5 ET38mm - White	5	7.46%
17x8.0 ET35mm - Gunmetal	18	26.87%
17x8.0 ET35mm - Gold	6	8.96%
17x8.0 ET35mm - Bronze	13	19.40%
17x8.0 ET35mm - Silver	7	10.45%
17x8.0 ET35mm - White	3	4.48%
Multiple Choice Poll. Voters: 67. You may not vote on this poll

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: Enkei RSF5 18x8.0 +45	ericmpena	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	85	06-18-2022 05:07 PM
Wheel Directory: Enkei RS05RR 18x8.5 +42	dabocx	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	206	03-02-2018 06:23 AM
Wheel Directory: Enkei Tenjin 18x8.0 +45/18x9.5 +45	DarrenDriven	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	3	08-03-2017 03:38 AM
Wheel Directory: Enkei Raijin 18x8.5 +45	SWPBRZ415	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	62	11-28-2016 04:51 PM
Wheel Directory: Enkei NT03+M 18x8.0 +35	Tunz	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	45	06-17-2016 12:31 AM

09-27-2012, 02:08 PM	#16
ModBargains Join Date: Sep 2012 Drives: FRS, M3 Location: La Habra, CA Posts: 296 Thanks: 48 Thanked 135 Times in 103 Posts Mentioned: 24 Post(s) Tagged: 1 Thread(s)	So I did more research for you guys and this is all the 5x100 fitments available: 17x7.5 ET48mm - 5x100 17x8.0 ET35mm - 5x100 17x8.0 ET48mm - 5x100 18x8.5 ET48mm - 5x100

09-27-2012, 03:53 PM	#21
whitejdm Senior Member Join Date: Dec 2011 Drives: BRZ prem. Location: Edmonton AB Posts: 250 Thanks: 20 Thanked 35 Times in 29 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	LOVE these wheels! Bump for some weight measurements on the 17's and a ball park price.

09-27-2012, 05:00 PM	#22
ModBargains Join Date: Sep 2012 Drives: FRS, M3 Location: La Habra, CA Posts: 296 Thanks: 48 Thanked 135 Times in 103 Posts Mentioned: 24 Post(s) Tagged: 1 Thread(s)	Update 9/27/12: Okay so Cusco is currently in negotiations with Enkei and IRF (japanese company who owns the rights to sell the RC-T4) concerning pricing and availability. So ModBargains and Cusco will be working on hopefully getting some a custom sizing for the FRS/BRZ guys. I'm going to try to get them to manufacture a 18x8.5 ET38mm size which should be a better looking fitment on a FRS/BRZ. We would need to order a minimum of 10 sets to make this happen. Problem is that it can't be multiple colors, just one color. -Frank

09-28-2012, 01:41 PM	#25
ebphoto Senior Member Join Date: Jun 2012 Drives: FR-S, NA8, S13 Location: Pensacola, FL Posts: 394 Thanks: 21 Thanked 201 Times in 91 Posts Mentioned: 13 Post(s) Tagged: 1 Thread(s)	should really go for a 18x9 +35 or something.. this car is 17x9 +35 with 255... not sunk, and fits big tires... i think that would be a better fitment.

09-28-2012, 03:39 PM	#28
dsgerbc Senior Member Join Date: Jan 2012 Drives: BRZ(sold), STI Location: A2, MI Posts: 1,915 Thanks: 176 Thanked 419 Times in 241 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	I love the look of these in gold (and my Braid order of a similarly-looking wheel is not happening), but there are no size/offset options that really appeal to me. I could be conviced to get 17x8 +48, if I see pics of it. But at the moment I'm inclined to think that this design will look small in 17". 18x8.5 +48 is close to what I'd want, but I don't think it offers enough clearance to the spring seat with a decent tire.

User Name		Remember Me?
Password