Suspension Review: KW v3 Coilovers - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DarrenDriven · 08-30-2012, 12:25 PM

Lifted from another topic...

Installation note: When installing these KWs we measured the amount of exposed threads below the lower spring collar to determine where to set the coilovers for future installations.

Front: 3/8" remaining thread = 1 9/16" drop
...12 7/8" distance from fender to center of hub (14 7/16" stock height)

Rear: 2 1/8" remaining thread = 2 1/4" drop
...12 3/8" distance from fender to center of hub (14 5/8" stock height)

Quote:

Originally Posted by Scooby South

Bliss is getting a great package from FEDEX...and then looking forward to putting on something to make a difference..

.. Thanks StranoParts...

going to wait til after work tomorrow night to install...that way I can read the manual...and study what I need to do...I wanted to install them tonight...but I wanted to make sure I get these absolutely perfect..

Bill

DarrenDriven · 08-30-2012, 12:25 PM

Lifted from another topic...

Quote:

Originally Posted by Scooby South

ok....KW's are ON...OMG...it is a sexy beast and man is it 'PLANTED'..... There is at least an inch of clearance between the tire and the Strut... sooo Camber isn't going to be an issue...AT ALL.. will easily fit 265's..if needed... So...STX...STR.....BRING IT...Its amazing how much Decent suspension does to a car...Installation...I give a 6...the front was no problem..however the ABS and Brake line is routed kinda funky..but I adapted and overcame the Rear.. was a bit more stubborn...but I got it...finally.. Stock 14mm rear sway is on now..with Kartboy links..running Recommended settings for now.. went on a short 'test' drive... I can't wait to get this thing on the course now......I LOVE the KW's...easy to tune... and pretty easy to adjust....I was going to have an event tomorrow but I didn't get to the alignment ...so Monday after work...then I also need to corner weight it.....so far...I am absolutely Beyond pleased with the KW's...They Got it right....On to the pics..

Stock Front Strut assembly....12.6 lbs...
KW Front Strut assembly... 12.9 lbs...

Fronts.... adjusting the ride height..

Front ...After adjustment...about a 1 inch gap between the top of the tire and fender... Coool thing of note...All 4 fenders are Factory Rolled..so nooo issue whatsoever with fitment...

Obligatory Side shot..

and...the Side Profile shot...soooo Sexy..

Can't wait for Cent Divs Next week in Milwaukee.... running up our good buddy Neal Tovsen...and his wife in STX...should be interesting..

...we'll see how it does against a well prepped Bimmer..

More later

Bill

VSGTS14 · 08-30-2012, 12:27 PM

perfect stance with a great coilover.

DarrenDriven · 08-30-2012, 12:27 PM

Still lifted...

Quote:

Originally Posted by Scooby South

Scooby South · 08-30-2012, 02:27 PM

Hello all.. I am the one that owns the car above...Thanks Darren..

Questions??

VSGTS14 · 08-30-2012, 02:35 PM

yes, do the kws come with their own top hats?

BRZranger · 08-30-2012, 02:44 PM

Quote:

Originally Posted by Scooby South

Hello all.. I am the one that owns the car above...Thanks Darrin..

Questions??

How much lower are you?
What settings did you use for rebound/compression?

I have V3s also, and I love them. The ride does feel more "planted", but I will have to take some time to mess with the settings and fine tune it for my daily driving. I really like how adjustable it is.

I went about 1 3/4" lower, not sure if that is too much, but feels good right now. Supposedly going that low affects the suspension geometry drastically, requiring parts to compensate for the new roll center.

gmookher · 08-30-2012, 03:11 PM

bery nice

Duo · 08-30-2012, 03:48 PM

Quote:

Originally Posted by Scooby South

Hello all.. I am the one that owns the car above...Thanks Darren..

Questions??

This will seem like an odd question, but can you please tell/PM me the box's dimensions? Trying to figure something out.

Apex Chase · 08-30-2012, 05:03 PM

Quote:

Originally Posted by Scooby South

Hello all.. I am the one that owns the car above...Thanks Darren..

Questions??

Sweet set up! What are the specs on you wheels and tires?

FT-86 SpeedFactory · 08-30-2012, 05:08 PM

Awesome set of coils enjoy them.

You going to be at nationals?

jamal · 08-30-2012, 05:17 PM

Quote:

Originally Posted by VSGTS14

yes, do the kws come with their own top hats?

No. They work with the stock tops, or you can get aftermarket plates for them. KW does make tops for some of their motorsports stuff but it is usually better to just use something else. RCE/GTworx and Vorshlag both have nice tops.

VSGTS14 · 08-30-2012, 05:34 PM

that's what i wanted to know, thanks man. i have vorshalg on my sti, they are nice!

Scooby South · 08-30-2012, 08:52 PM

Quote:

Originally Posted by VSGTS14

yes, do the kws come with their own top hats?

No...the Stockers will work...I have plates on the front and the stockers on the rear...
Camber set at -2.5 zero toe front
Camber set rear -1.75, 1/16th toe in

Quote:

Originally Posted by brzranger

How much lower are you?

Mine measures from the bottom of the rim to the arch in the fender...23" front 23 1/4" rear..

Quote:

What settings did you use for rebound/compression?

Pretty much went with the Stock Settings from the factory in the Setup guide and adjusted from there..

Quote:

I have V3s also, and I love them. The ride does feel more "planted", but I will have to take some time to mess with the settings and fine tune it for my daily driving. I really like how adjustable it is.

I went about 1 3/4" lower, not sure if that is too much, but feels good right now. Supposedly going that low affects the suspension geometry drastically, requiring parts to compensate for the new roll center.

Everybody has a different opinion on where to setup the car... It really is a personal preference... I kinda like a little bit of tightness..so I set up my car accordingly.. What works for me might not be the best option for you...

start with the factory settings... then learn to adjust from there..

Quote:

Originally Posted by gmookher

bery nice

Danka..

Quote:

Originally Posted by Duo

This will seem like an odd question, but can you please tell/PM me the box's dimensions? Trying to figure something out.

I will have to dig it out of the garage ..(in the attic)

Quote:

Originally Posted by Apex Chase

Sweet set up! What are the specs on you wheels and tires?

17x9 with a 42. 245/40/17 Hankook RS-3's... I will be running in ST Class.. either STX or STR... the car with Coilovers can easily fit 265's if needed...probably will go up to a 255 for the extra gearing... topping out right now at 59.6 in 2nd.. so should easily be 61 or so with a bit taller tire.. 255/40/17

Quote:

Originally Posted by FT-86 SpeedFactory

Awesome set of coils enjoy them.

You going to be at nationals?

Not this year.... Not Classed yet...After Nats it will be then Next year making a full assault on ST* whatever class..

Bill

08-30-2012, 12:27 PM	#3
VSGTS14 987 Motorsports Join Date: Aug 2012 Drives: '13 WO FR-S Location: Phillipsburg, NJ Posts: 340 Thanks: 1 Thanked 97 Times in 66 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	perfect stance with a great coilover. __________________ '13 WO FR-S Track Car Build

08-30-2012, 02:35 PM	#6
VSGTS14 987 Motorsports Join Date: Aug 2012 Drives: '13 WO FR-S Location: Phillipsburg, NJ Posts: 340 Thanks: 1 Thanked 97 Times in 66 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	yes, do the kws come with their own top hats? __________________ '13 WO FR-S Track Car Build

08-30-2012, 05:34 PM	#13
VSGTS14 987 Motorsports Join Date: Aug 2012 Drives: '13 WO FR-S Location: Phillipsburg, NJ Posts: 340 Thanks: 1 Thanked 97 Times in 66 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	that's what i wanted to know, thanks man. i have vorshalg on my sti, they are nice! __________________ '13 WO FR-S Track Car Build

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BRZ/FR-S Suspension Options List (Springs and Coilovers)	WingsofWar	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	333	02-01-2022 06:32 PM
Suspension Review: Eibach Pro-Kit Lowering Springs	DarrenDriven	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	136	10-09-2020 07:26 PM
Suspension Review: Eibach Sportline Lowering Springs	DarrenDriven	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	129	07-23-2019 10:59 PM
Suspension Review: Hotchkis Sport Springs	Nitro22	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	43	02-23-2016 07:01 PM
Suspension / Coilovers ~ How to Choose the Right Setup for YOU	Circuit Motorsports	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	30	09-24-2015 02:53 PM

08-30-2012, 03:11 PM	#8
gmookher Banned Join Date: Aug 2012 Drives: VortechSC,BorlaEL,Perrin,GCRace Location: HighHeatHighAltitudeAZ,USA Posts: 2,254 Thanks: 458 Thanked 669 Times in 394 Posts Mentioned: 9 Post(s) Tagged: 2 Thread(s)	bery nice

08-30-2012, 05:08 PM	#11
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,579 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Awesome set of coils enjoy them. You going to be at nationals?

User Name		Remember Me?
Password