Racer X Fabrication: Catch can revisited - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Jeff@Racer X Fab · 09-28-2016, 11:23 AM

Here are the final pics of our catch can assembly, this has been a great project from start to finish. If you have any questions about the product please let me know.

Product overview:

The inlet and outlet use sintered stainless steel filters rated at 10 micron on the inlet and 5 micron at the outlet.

The internal baffles use a standard perforation pattern from tooling we built in house, they are designed to maximize the effect of separating oil from air during its travel from inlet to outlet.

Here is the black version of our catch can installed on the vehicle.

Dual catch can version

Here is the gray version of our catch can installed on the vehicle.

Here are the powder coated mounting bracket and stainless steel ball valve for draining the catch can.

Finally all of our pre-orders ready to ship with their temporary housings for shipping. Thank you to everyone who jumped on board during our initial orders.

The QR code on the side of our box will take you directly to our installation instructions. Instructions are also available on our website under the product listing and can be printed if you choose to do so.

kch · 09-28-2016, 01:36 PM

Beautiful work, as always.

kch · 10-03-2016, 03:53 PM

Man, this thing is sexy.

86Tony · 11-02-2016, 10:47 PM

Quote:

Originally Posted by Jeff@Racer X Fab

Here are the final pics of our catch can assembly, this has been a great project from start to finish. If you have any questions about the product please let me know.

Product overview:

The inlet and outlet use sintered stainless steel filters rated at 10 micron on the inlet and 5 micron at the outlet.

The internal baffles use a standard perforation pattern from tooling we built in house, they are designed to maximize the effect of separating oil from air during its travel from inlet to outlet.

Here is the black version of our catch can installed on the vehicle.

Dual catch can version

Here is the gray version of our catch can installed on the vehicle.

Here are the powder coated mounting bracket and stainless steel ball valve for draining the catch can.

Finally all of our pre-orders ready to ship with their temporary housings for shipping. Thank you to everyone who jumped on board during our initial orders.

The QR code on the side of our box will take you directly to our installation instructions. Instructions are also available on our website under the product listing and can be printed if you choose to do so.

will this work with JR supercharger? seems like it does.

Jeff@Racer X Fab · 11-03-2016, 10:08 AM

Quote:

Originally Posted by 86Tony

will this work with JR supercharger? seems like it does.

Yes, this will work with the JR supercharger kit.

Vin · 03-18-2017, 04:29 PM

Thanks for getting this product out on the market

It was the only catch can that ticked all the boxer (baffled, stealthy, window, drain, ports mounted on different height)

Here is mine fitted:

And the result after 1500km, nice espresso !

Hawk77FT · 03-19-2017, 10:21 PM

Would this fit the right hand side cars?

Alex@Racer X Fab · 03-24-2017, 10:33 AM

Quote:

Originally Posted by Hawk77FT

Would this fit the right hand side cars?

No, the mounting bracket will not work with RHD, but we do offer a universal catch can that will require you to make your own bracket.

http://racerxfabrication.com/universal/catch-can

SCFD · 02-28-2022, 10:36 PM

Has anyone thought about drilling a small hole in the ball valve and adding a safety wire?

09-28-2016, 11:23 AM	#29
Jeff@Racer X Fab Senior Member Join Date: Aug 2012 Drives: Subaru BRZ, Toyota MR2 Turbo Location: Lansing, MI Posts: 321 Thanks: 92 Thanked 340 Times in 135 Posts Mentioned: 23 Post(s) Tagged: 1 Thread(s)	Finished Catch can!!! Here are the final pics of our catch can assembly, this has been a great project from start to finish. If you have any questions about the product please let me know. Product overview: The inlet and outlet use sintered stainless steel filters rated at 10 micron on the inlet and 5 micron at the outlet. The internal baffles use a standard perforation pattern from tooling we built in house, they are designed to maximize the effect of separating oil from air during its travel from inlet to outlet. Here is the black version of our catch can installed on the vehicle. Dual catch can version Here is the gray version of our catch can installed on the vehicle. Here are the powder coated mounting bracket and stainless steel ball valve for draining the catch can. Finally all of our pre-orders ready to ship with their temporary housings for shipping. Thank you to everyone who jumped on board during our initial orders. The QR code on the side of our box will take you directly to our installation instructions. Instructions are also available on our website under the product listing and can be printed if you choose to do so.

03-18-2017, 04:29 PM	#34
Vin Senior Member Join Date: Aug 2016 Drives: 2012 GT86 EU-spec Location: The Netherlands Posts: 204 Thanks: 232 Thanked 149 Times in 99 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Thanks for getting this product out on the market It was the only catch can that ticked all the boxer (baffled, stealthy, window, drain, ports mounted on different height) Here is mine fitted: And the result after 1500km, nice espresso ! __________________ My 86 TRD

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racer X Fabrication, oil cooler kit	Jeff@Racer X Fab	Engine, Exhaust, Transmission	72	03-15-2017 11:15 AM
Racer X fabrication oil pan	puma	Engine, Exhaust, Bolt-Ons	18	02-17-2017 01:57 PM
Racer X Fabrication catch can development/prototype!!	Jeff@Racer X Fab	Engine, Exhaust, Transmission	35	12-16-2015 02:00 PM
Racer X Fabrication oil pan design and development!	Jeff@Racer X Fab	Engine, Exhaust, Transmission	87	06-03-2015 12:10 PM
DIY Changing Cam Plate Racer X fabrication	Mr.	DIY (Do-It-Yourself) Guides	0	08-06-2014 01:56 AM

09-28-2016, 01:36 PM	#30
kch Senior Misanthrope Join Date: Sep 2014 Drives: 2015 BRZ Series.Blue CWP Location: Seattle, WA Posts: 1,490 Thanks: 1,743 Thanked 1,169 Times in 645 Posts Mentioned: 20 Post(s) Tagged: 2 Thread(s)	Beautiful work, as always.

10-03-2016, 03:53 PM	#31
kch Senior Misanthrope Join Date: Sep 2014 Drives: 2015 BRZ Series.Blue CWP Location: Seattle, WA Posts: 1,490 Thanks: 1,743 Thanked 1,169 Times in 645 Posts Mentioned: 20 Post(s) Tagged: 2 Thread(s)	Man, this thing is sexy.

03-19-2017, 10:21 PM	#35
Hawk77FT Senior Member Join Date: Jul 2012 Drives: GTS 86 Location: Australia Posts: 989 Thanks: 873 Thanked 476 Times in 272 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	Would this fit the right hand side cars?

02-28-2022, 10:36 PM	#37
SCFD Senior Member Join Date: Sep 2020 Drives: FR-S Location: USA Posts: 171 Thanks: 322 Thanked 71 Times in 50 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Has anyone thought about drilling a small hole in the ball valve and adding a safety wire?

User Name		Remember Me?
Password