How do I port over an OTS map to Ecutek? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sing4LTS · 05-08-2015, 04:53 PM

I have searched everywhere... I have found multiple places that say I can load an OTS map with Ecutek, but I can't seem to get it to open. Can anybody point me in the right direction? Obviously, I can go through and copy each table one by one...is that the only way?

Kodename47 · 05-08-2015, 06:53 PM

Which cal ID do you have?

In theory you could just open an OTS tune if you know the correct one to use, not an OFT hacked one though. However you can't apply the RaceROM patches to OTS tunes as most of them have launch control and ECUtek doesn't like ROMs that have had extras added to them.

Your best bet is to become good with Romraider and copy to a completely stock ROM on that before importing to ECUtek.

Sing4LTS · 05-08-2015, 07:15 PM

I ended up just copying every single table. Was a major PIA, but it worked.

Kodename47 · 05-08-2015, 07:49 PM

Quote:

Originally Posted by Sing4LTS

I ended up just copying every single table. Was a major PIA, but it worked.

In ECUtek? If so there's probably some tables that won't have been copied. None of those will be critical though.

Xero-Limit · 05-08-2015, 11:15 PM

You should be able to just open it normally if it is indeed "open" and not encrypted. Rename the extension to .bin if you have to.

steve99 · 05-09-2015, 01:37 AM

Quote:

Originally Posted by moto-mike

You should be able to just open it normally if it is indeed "open" and not encrypted. Rename the extension to .bin if you have to.

They are fully open no encryprion
However as @Kodename47 said beware of the launch control\flatFoot shift patch as this is in an area of rom not used by stock rom code and ecutek may write some of its custom map or its own custom patches to the same area.
Also due to the way the OFT system works the rom calid is changed in some oft roms in two of the three occurrances of the calid in the rom. This may also confuse ecutek. Either of those could result in problems for those doing this.

Sing4LTS · 05-11-2015, 05:23 PM

Quote:

Originally Posted by Kodename47

In ECUtek? If so there's probably some tables that won't have been copied. None of those will be critical though.

It's working great, no issues whatsoever. I was able to port over 2 tunes. One for the the UEL Stage II 93, and UELe85. Ran the 93 for the first two days, and now I'm on the e85 map. Everything is running STRONG!

05-08-2015, 04:53 PM	#1
Sing4LTS Member Join Date: May 2013 Drives: 13' FR-S Location: La Porte, TX Posts: 32 Thanks: 4 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	How do I port over an OTS map to Ecutek? I have searched everywhere... I have found multiple places that say I can load an OTS map with Ecutek, but I can't seem to get it to open. Can anybody point me in the right direction? Obviously, I can go through and copy each table one by one...is that the only way?

05-08-2015, 06:53 PM	#2
Kodename47 Senior Member Join Date: Oct 2012 Drives: UK GT86 Location: UK Posts: 3,040 Thanks: 185 Thanked 1,633 Times in 1,113 Posts Mentioned: 156 Post(s) Tagged: 1 Thread(s)	Which cal ID do you have? In theory you could just open an OTS tune if you know the correct one to use, not an OFT hacked one though. However you can't apply the RaceROM patches to OTS tunes as most of them have launch control and ECUtek doesn't like ROMs that have had extras added to them. Your best bet is to become good with Romraider and copy to a completely stock ROM on that before importing to ECUtek. __________________ .: Stealth 86 :. Abbey Motorsport/K47 Tuned Sprintex 210 Supercharger Kodename 47 DJ: Soundcloud / Instagram / Facebook

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
USB port?	nickhabi	Electronics \| Audio \| NAV \| Infotainment	13	09-02-2014 05:57 PM
USB Port removal	Lunatic	Cosmetic Modification (Interior/Exterior/Lighting)	2	06-29-2014 07:39 PM
FS: OEM Port Injectors	Tactical_BRZ	Engine, Exhaust, Bolt-Ons	2	01-05-2014 11:21 AM
USB port help	_B_	Electronics \| Audio \| NAV \| Infotainment	2	01-01-2014 10:36 PM
BRZ & USB Port	brz007	Electronics \| Audio \| NAV \| Infotainment	14	04-14-2013 09:06 PM

05-08-2015, 07:15 PM	#3
Sing4LTS Member Join Date: May 2013 Drives: 13' FR-S Location: La Porte, TX Posts: 32 Thanks: 4 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I ended up just copying every single table. Was a major PIA, but it worked.

05-08-2015, 11:15 PM	#5
Xero-Limit Join Date: Nov 2012 Drives: JDL Turbo FRS, 335SC BRZ (ret) Location: Lehigh Valley, PA Posts: 938 Thanks: 368 Thanked 1,550 Times in 527 Posts Mentioned: 380 Post(s) Tagged: 6 Thread(s)	You should be able to just open it normally if it is indeed "open" and not encrypted. Rename the extension to .bin if you have to.

User Name		Remember Me?
Password