Oil Filter - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Stonehorsw · 12-15-2021, 03:49 PM

Is the oil filter same as Forester? Does anyone have the part number?

Getting ready for the 1k breakin oil change

dragoontwo · 12-15-2021, 03:51 PM

Go pop your hood and get the number. It's printed right on the side.

emce · 12-15-2021, 04:02 PM

Here's the part number. I ordered it from that site but not trying to push them - I just couldn't find anything aftermarket at the time.

https://www.subarupartsdeal.com/part...5208aa170.html

Stonehorsw · 12-21-2021, 05:42 PM

Quote:

Originally Posted by emce

Here's the part number. I ordered it from that site but not trying to push them - I just couldn't find anything aftermarket at the time.

https://www.subarupartsdeal.com/part...5208aa170.html

The right parts number for the 22 BRZ is 15208AA170, and according to subaru’s service is same as wrx

fastisfun · 01-05-2022, 08:13 AM

Does the oil pan plug use a crush washer? I don't see one in the parts blow up.

emce · 01-05-2022, 08:50 AM

Quote:

Originally Posted by fastisfun

Does the oil pan plug use a crush washer? I don't see one in the parts blow up.

It does - same as previous gen: https://parts.subaru.com/p/Subaru__/...803916010.html

dragoontwo · 01-05-2022, 08:54 AM

Quote:

Originally Posted by fastisfun

Does the oil pan plug use a crush washer? I don't see one in the parts blow up.

Yes. I see it in the engine section under oil pan, and also in the maintenance section right next to the drain plug.

Stonehorsw · 01-05-2022, 09:20 AM

Quote:

Originally Posted by fastisfun

Does the oil pan plug use a crush washer? I don't see one in the parts blow up.

The car came without, but on the manual is listed as optional. I installed for piece of mind, used from gen1.

mav1178 · 01-05-2022, 03:58 PM

Quote:

Originally Posted by Stonehorsw

The car came without, but on the manual is listed as optional. I installed for piece of mind, used from gen1.

yours might be painted/glued on to your drain bolt or pan, so the washer is "missing"....

I had this issue with my 2013

https://www.ft86club.com/forums/showthread.php?t=54142

dsc_pat · 01-05-2022, 04:10 PM

Optional is the replacement of it, not its presence.

Stonehorsw · 01-05-2022, 04:53 PM

Quote:

Originally Posted by mav1178

yours might be painted/glued on to your drain bolt or pan, so the washer is "missing"....

I had this issue with my 2013

https://www.ft86club.com/forums/showthread.php?t=54142

Probably it. I replaced both washer and plug on the first change. Makes sense

fastisfun · 01-08-2022, 08:31 AM

I had to use a dental tool to remove my washer. Which was nearly invisible.

LoneFashion · 01-10-2022, 01:04 AM

Quote:

Originally Posted by Stonehorsw

Is the oil filter same as Forester? Does anyone have the part number?

Getting ready for the 1k breakin oil change

I’ve never changed my oil myself but I just hit 1k miles in my brz. So, do I always change the oil filter when I change the oil and also, what oil do you recommend?

Kona61 · 01-10-2022, 02:48 AM

The little washer gets painted over at the factory so it sticks to the drain plug. Use a small screwdriver or pick to get it off. Make sure you don’t go crazy and score the plug.

I should also mention, oil was changed at 600 or so miles and had a decent number of small chunks and quite a bit of metal flakes/glitter so I’d highly recommend doing it before 1000 miles.

12-15-2021, 03:49 PM	#1
Stonehorsw Senior Member Join Date: Jul 2020 Drives: 18 Brz (Sold) / 22 BRZ Location: Michigan Posts: 670 Thanks: 1,122 Thanked 445 Times in 261 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Oil Filter Is the oil filter same as Forester? Does anyone have the part number? Getting ready for the 1k breakin oil change

01-10-2022, 02:48 AM	#14
Kona61 Senior Member Join Date: Feb 2021 Drives: ‘22 CWP Location: SoCal Posts: 261 Thanks: 156 Thanked 242 Times in 108 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	The little washer gets painted over at the factory so it sticks to the drain plug. Use a small screwdriver or pick to get it off. Make sure you don’t go crazy and score the plug. I should also mention, oil was changed at 600 or so miles and had a decent number of small chunks and quite a bit of metal flakes/glitter so I’d highly recommend doing it before 1000 miles. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS (MD): Grimmspeed Intake, Perrin Inlet/CAI Filter, Green Air Filter	s203.22b	Engine, Exhaust, Bolt-Ons	1	03-08-2021 01:25 PM
FS: 2 Oil Filters, 1 Cabin Air Filter, 1 Engine Air Filter, 2 Wipers	dk127itr	Mechanical Maintenance and Tools	7	11-03-2020 12:13 AM
TRD Intake Filter Air Filter Cleaner Element FRS BRZ 86 Toyota Racing Development	hirollaz	Engine, Exhaust, Bolt-Ons	0	03-15-2017 03:46 AM
Drop In filter test! Stock, Apexi, No filter	RallySport Direct	Engine, Exhaust, Transmission	14	06-25-2012 03:40 PM

12-15-2021, 03:51 PM	#2
dragoontwo Senior Member Join Date: May 2020 Drives: 22 BRZ limited Location: NW IA Posts: 1,206 Thanks: 225 Thanked 1,023 Times in 536 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Go pop your hood and get the number. It's printed right on the side.

12-15-2021, 04:02 PM	#3
emce Member Join Date: Sep 2021 Drives: 22 BRZ Limited Location: Colorado Posts: 41 Thanks: 4 Thanked 22 Times in 10 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Here's the part number. I ordered it from that site but not trying to push them - I just couldn't find anything aftermarket at the time. https://www.subarupartsdeal.com/part...5208aa170.html

01-05-2022, 08:13 AM	#5
fastisfun Member Join Date: Jun 2021 Drives: 2019 BMW M2C Location: Florida Keys Posts: 16 Thanks: 1 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Does the oil pan plug use a crush washer? I don't see one in the parts blow up.

01-05-2022, 04:10 PM	#10
dsc_pat Senior Member Join Date: Feb 2014 Drives: Too fast Location: Canada Posts: 134 Thanks: 202 Thanked 93 Times in 53 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Optional is the replacement of it, not its presence.

01-08-2022, 08:31 AM	#12
fastisfun Member Join Date: Jun 2021 Drives: 2019 BMW M2C Location: Florida Keys Posts: 16 Thanks: 1 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I had to use a dental tool to remove my washer. Which was nearly invisible.

User Name		Remember Me?
Password